qingping wdl-1157

Qingping Digital Bluetooth Thermometer Hygrometer User Manual

બ્રાન્ડ: qingping | મોડલ: wdl-1157

1. ઉત્પાદન ઓવરview

The Qingping Digital Bluetooth Thermometer Hygrometer is designed to provide accurate, real-time temperature and humidity readings for indoor environments. Featuring an E Ink display for clear visibility from various angles, this compact device offers multiple mounting options and long battery life. It can connect to the Qingping+ app for remote data access and historical data tracking.

Qingping Digital Bluetooth Thermometer Hygrometer with a smartphone displaying the companion app

Figure 1: Qingping Thermometer Hygrometer and its companion app interface.

2. સેટઅપ

2.1. બેટરી ઇન્સ્ટોલેશન

The device uses one CR2430 Lithium Metal button cell battery, which is included. To install or replace the battery:

  1. ઉપકરણની પાછળ બેટરી કમ્પાર્ટમેન્ટ કવર શોધો.
  2. Twist the cover counter-clockwise to open it.
  3. CR2430 બેટરીને ધન (+) બાજુ ઉપર રાખીને દાખલ કરો.
  4. Replace the cover and twist clockwise to secure it.
ક્લોઝ-અપ view of the back of the Qingping thermometer showing the CR2430 battery compartment

Figure 2: Battery compartment showing the CR2430 battery.

2.2. માઉન્ટિંગ વિકલ્પો

The Qingping Thermometer Hygrometer offers versatile placement options:

  • ડેસ્કટૉપ પ્લેસમેન્ટ: Open the back cover to an angle of 90 degrees to the body. This allows the device to stand upright on a flat surface.
  • વોલ માઉન્ટિંગ: Use the supplied wall sticker. Attach the sticker to a clean, dry wall surface, then attach the monitor to the sticker. The monitor has built-in magnets, and the wall sticker contains an iron plate for secure attachment.
  • ચુંબકીય જોડાણ: The device has built-in magnets, allowing it to be directly attached to iron surfaces, such as a refrigerator door.
Two images showing the Qingping thermometer in desktop mode with its kickstand and wall mode attached to a wall

Figure 3: Desktop and Wall mounting configurations.

3. ઓપરેટિંગ સૂચનાઓ

3.1. E Ink Display

The E Ink display provides clear, paper-like readings of temperature and humidity. It offers ultra-wide viewing angles and high contrast for easy readability from various positions in a room.

Diagram illustrating the ultra-wide viewing angle and ultra-high contrast of the E-ink display on the Qingping thermometer

Figure 4: Features of the E Ink display.

3.2. તાપમાન એકમોનું સ્વિચિંગ

To switch between Fahrenheit (°F) and Celsius (°C), press the button located on the back of the product.

3.3. App Connection and Remote Monitoring (Qingping+ App)

To access temperature and humidity data remotely, download the Qingping+ app from the Google Play Store or Apple App Store. A Qingping Bluetooth Gateway (sold separately) is required for remote access functionality.

Qingping thermometer on a table with a smartphone displaying the Qingping+ app interface for remote monitoring

Figure 5: Remote monitoring via the Qingping+ app.

3.4. Historical Data Recording

The device tracks and saves data for up to 30 days. This historical data can be viewed as graphical statistics within the Qingping+ app and can also be exported in CSV format if needed.

A hand holding a smartphone displaying historical temperature and humidity data in the Qingping+ app

Figure 6: Historical data viewable in the Qingping+ app.

4. જાળવણી

૬.૧. બેટરી લાઇફ અને રિપ્લેસમેન્ટ

The device features low power consumption, providing approximately 10 months of battery life in normal indoor environments. When the battery is low, a battery icon will appear on the display. Refer to Section 2.1 for battery replacement instructions.

4.2. સંભાળ અને સફાઈ

To ensure accurate readings and prolong the device's lifespan:

  • ઉપકરણને નરમ, સૂકા કપડાથી સાફ કરો. ઘર્ષક ક્લીનર્સનો ઉપયોગ કરશો નહીં અથવા ઉપકરણને પાણીમાં બોળશો નહીં.
  • Avoid placing the product in environments with humidity consistently higher than 90% for long-term use, as this may affect performance.
  • ઉત્પાદનના તળિયે વેન્ટ હોલને અવરોધિત કરશો નહીં.

5. મુશ્કેલીનિવારણ

  • અચોક્કસ વાંચન:
    • Ensure the device is placed in a stable environment, away from direct sunlight, drafts, or heat sources.
    • Allow approximately 15 minutes for the readings to stabilize after initial setup or significant environmental changes.
    • Verify the vent hole on the bottom of the product is not blocked.
  • Display Issues (e.g., "188" displayed):
    • This indicates a factory reset or an error. Press and hold the button on the back of the product until the screen displays "188", then release. Wait for the product to return to correct temperature and humidity readings.
  • No Data in App / Connection Issues:
    • ખાતરી કરો કે તમારા સ્માર્ટફોન પર બ્લૂટૂથ સક્ષમ છે અને ઉપકરણ રેન્જમાં છે.
    • For remote access, confirm that a Qingping Bluetooth Gateway is properly set up and connected.
    • Check the battery level of the device.
    • Restart the Qingping+ app and/or your smartphone.

6. સ્પષ્ટીકરણો

લક્ષણવિગત
મોડલ નંબરwdl-1157
પરિમાણો2.91 x 0.63 x 2.91 ઇંચ
વજન3.53 ઔંસ
તાપમાન શ્રેણી32 ~ 122 ° ફે (0 ~ 50 ° સે)
ભેજની રેન્જ0% ~ 99.9%RH (under no condensation circumstances)
તાપમાનની ચોકસાઈ0.1°
બેટરીનો પ્રકાર1 x CR2430 Lithium Metal (included)
બેટરી જીવનApprox. 10 months (in normal indoor environments)
કનેક્ટિવિટીબ્લૂટૂથ લો એનર્જી
ડેટા સ્ટોરેજUp to 30 days (viewable in Qingping+ app)
Close-up of the side of the Qingping thermometer showing the high accuracy Sensirion sensor

Figure 7: High accuracy sensor from Sensirion.

7. વોરંટી અને સપોર્ટ

For warranty information and technical support, please refer to the documentation included with your product packaging or visit the official Qingping webસાઇટ વોરંટી દાવા માટે તમારી ખરીદીની રસીદ રાખો.

For further assistance, you may also contact Qingping customer service through their official channels.

સંબંધિત દસ્તાવેજો - wdl-1157

પ્રિview Qingping Temp & RH Monitor T Version CGG1T User Manual
Comprehensive user manual for the Qingping Temp & RH Monitor T Version (Model CGG1T), detailing specifications, setup instructions for desktop and wall modes, connectivity with Apple HomeKit and Qingping+ app, troubleshooting, warranty, and FCC compliance. Includes safety warnings and hazardous substance information.
પ્રિview Qingping Temp & RH Monitor H Version FAQ and Troubleshooting Guide
Find solutions to common issues with the Qingping Temp & RH Monitor H Version, including data display, connectivity, and responsiveness. Learn how to update firmware and reset the device.
પ્રિview Qingping Air Monitor Lite User Manual | Setup, Specifications & Troubleshooting
Comprehensive user manual for the Qingping Air Monitor Lite (CGDN1). Learn how to set up, connect to HomeKit, Mi Home, and Qingping+ apps, view specifications, and troubleshoot common issues.
પ્રિview Qingping CGP22C CO2 & Temp & RH Monitor User Manual
User manual for the Qingping CGP22C CO2, Temperature, and Humidity Monitor, providing setup, operation, troubleshooting, and specifications. Learn how to power on/off, charge, connect to the Qingping IoT app, and understand device features.
પ્રિview Qingping CO2 & Temp & RH Monitor (CGP22C) User Manual
User manual for the Qingping CO2 & Temp & RH Monitor (CGP22C), detailing power on/off, charging, app connection, sensor specifications, troubleshooting, and warranty information.
પ્રિview Qingping Air Monitor CGS1 User Manual and Specifications
Comprehensive user manual for the Qingping Air Monitor CGS1, covering setup, operation, sensor initialization, connectivity, troubleshooting, specifications, and warranty information.