M5Stack K010

M5Stack Core2 IoT Development Kit User Manual

મોડલ: K010

1. પરિચય

The M5Stack Core2 is a versatile IoT development kit designed for rapid prototyping and deployment of various applications. It features an ESP32-D0WDQ6-V3 microcontroller, a 2-inch TFT LCD touch screen, and integrated Wi-Fi and Bluetooth connectivity. This manual provides essential information for setting up, operating, and maintaining your Core2 device.

M5Stack Core2 IoT Development Kit hero image

Figure 1.1: M5Stack Core2 IoT Development Kit, showcasinતેની કોમ્પેક્ટ ડિઝાઇન અને ડિસ્પ્લે.

2. બોક્સમાં શું છે

ખાતરી કરો કે નીચે સૂચિબદ્ધ બધી વસ્તુઓ તમારા પેકેજમાં શામેલ છે:

M5Stack Core2 and included accessories: USB-C cable and hex wrench

Figure 2.1: Contents of the M5Stack Core2 package, including the Core2 unit, USB-C cable, and hex wrench.

Diagram showing Core2, USB Type-C cable, and hex wrench as package contents

Figure 2.2: Visual representation of the shipping list for the M5Stack Core2.

3. ઉત્પાદન ઓવરview

The M5Stack Core2 is built around the ESP32-D0WDQ6-V3 chip, offering robust performance for various applications. Key features include:

વિગતવાર view of M5Stack Core2 with labels for components like touch screen, ESP32, USB-C, SD card, LED, PWR, RST

Figure 3.1: Annotated diagram of the M5Stack Core2, highlighting its main components and interfaces.

આગળ view of M5Stack Core2 with callouts for power indicator light, built-in speaker, 16M Flash, 8M PSRAM, and capacitive touch screen

Figure 3.2: Key features of the M5Stack Core2, including memory and display type.

4. સ્પષ્ટીકરણો

The following table details the technical specifications of the M5Stack Core2:

સ્પષ્ટીકરણપરિમાણ
SoCESP32-D0WDQ6-V3, 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi
ફ્લેશ16MB
PSRAM8MB
ઇનપુટ વોલ્યુમtage5V @ 500mA
હોસ્ટ ઇંટરફેસપ્રકાર-C x ૧, ગ્રોવ(I2C+I/O+UART) x ૧
એલઇડીલીલો શક્તિ સૂચક પ્રકાશ
બટનોPower button, RST button, screen virtual buttons x 3
કંપન ચેતવણીકંપન મોટર
વસ્તુનું વજન૧૧.૩ ઔંસ (આશરે ૩૨૦ ગ્રામ)
પેકેજ પરિમાણો3.19 x 2.28 x 0.87 ઇંચ
બેટરીઓ1 લિથિયમ આયન બેટરી (સમાવેલ)
M5Stack Core2 on a digital scale showing 54.9 grams

Figure 4.1: M5Stack Core2 weight measurement.

M5Stack Core2 with dimensions: 54mm x 54mm x 16.5mm

Figure 4.2: M5Stack Core2 dimensions.

5. સેટઅપ

To begin using your M5Stack Core2, follow these initial setup steps:

  1. ચાર્જિંગ: Connect the M5Stack Core2 to a 5V USB power source using the provided USB Type-C cable. The device will begin charging.
  2. પાવર ચાલુ: Press and hold the power button (usually located on the side) for approximately 6 seconds to turn on the device.
  3. સોફ્ટવેર પર્યાવરણ: The Core2 supports various development environments, including UIFlow, Arduino, and MicroPython. Choose your preferred environment and set up the necessary drivers and IDE on your computer.
  4. First Program: Refer to the official M5Stack documentation for guides on uploading your first program or firmware to the Core2.

6. ઓપરેટિંગ સૂચનાઓ

The M5Stack Core2 is designed for flexible operation depending on your application. Here are general guidelines:

7. જાળવણી

Proper maintenance ensures the longevity and optimal performance of your M5Stack Core2:

8. મુશ્કેલીનિવારણ

This section addresses common issues you might encounter with your M5Stack Core2.

Q1: What is the maximum supported capacity of the SD card, and why is there no response when the SD card is inserted?
Theoretically, devices based on ESP32 support up to 16GB. We recommend using a SD card model SDSQUNC-016G-ZN6MA. Ensure the SD card is properly inserted and formatted.
Q2: Using the battery in either of the battery ports on the USB unit or the Core2 forces the unit to stay powered on continuously. Any attempt to shut down using the side button causes the device to restart after.
We have found that the reason is that the filter capacitor capacity of the USB 1.2 module is too large. If you still need to use batteries to power the Core2 + USB 1.2 solution, to avoid frequent restarts, the following two solutions can be adopted:
  • Remove the filter capacitor.
  • Replace it with a smaller capacity filter capacitor (10uF is recommended).
Q3: How to extend the Core2 with an extension module?
You must remove the original bottom and battery of the Core2, then you can stack another module extension.
FAQ section image with questions and answers regarding SD card, battery issue, and extension modules

Figure 8.1: Common questions and solutions for the M5Stack Core2.

9. અરજીનો અવકાશ

The M5Stack Core2 is suitable for a wide range of applications, including but not limited to:

Collage of M5Stack Core2 applications: Smart home devices, STEM education, IoT controller, DIY projects

આકૃતિ 9.1: ઉદાamples of M5Stack Core2 applications.

Visual representation of M5Stack Core2's scope of application

Figure 9.2: Further illustration of the M5Stack Core2's versatile applications.

૩.૧. સપોર્ટ અને સંસાધનો

For more detailed tutorials, documentation, and community support, please visit the official M5Stack webસાઇટ:

www.m5stack.com

Instructions on how to access tutorials on the M5Stack webસાઇટ

Figure 10.1: Guide to accessing online tutorials and documentation.

M5Stack દ્વારા વધુ website logo and URL

Figure 10.2: Official M5Stack webઆધાર માટે સાઇટ.

સંબંધિત દસ્તાવેજો - K010

પ્રિview M5Stack CORE2: ESP32 Development Board Overview અને ઝડપી શરૂઆત માર્ગદર્શિકા
Comprehensive guide to the M5Stack CORE2, an ESP32-based development board featuring a 2-inch TFT screen, detailing its hardware, functions, power management, and UIFlow quick start.
પ્રિview M5STACCK STAMPS3 ડેટાશીટ અને ટેકનિકલ વિશિષ્ટતાઓ
M5STACK ST નું અન્વેષણ કરોAMPS3 ડેવલપમેન્ટ બોર્ડ, જેમાં Wi-Fi અને બ્લૂટૂથ 5 (LE) સાથે ESP32-S3 ચિપ છે. આ ડેટાશીટ IoT પ્રોજેક્ટ્સ માટે તેની હાર્ડવેર રચના, પિન વર્ણન, કાર્યાત્મક ક્ષમતાઓ અને ઇલેક્ટ્રિકલ લાક્ષણિકતાઓની વિગતો આપે છે.
પ્રિview M5Stack AtomS3-Lite ESP32-S3 Development Board
Explore the M5Stack AtomS3-Lite, a compact ESP32-S3 development board featuring Wi-Fi, integrated antenna, and versatile interfaces for IoT and microcontroller projects. Learn about its specifications, features, and development options with Arduino IDE and UiFlow2.
પ્રિview M5StickC Plus2 ઓપરેશન માર્ગદર્શન
M5StickC Plus2 IoT ડેવલપમેન્ટ બોર્ડ માટે વ્યાપક કામગીરી માર્ગદર્શન. આ માર્ગદર્શિકા બુટ નિષ્ફળતા અને બેટરી સમસ્યાઓ સહિત સામાન્ય મુશ્કેલીનિવારણ દૃશ્યોને આવરી લે છે, અને M5Burner ટૂલનો ઉપયોગ કરીને સત્તાવાર ફર્મવેર ફ્લેશ કરવા માટે વિગતવાર, પગલું-દર-પગલાં સૂચનો પ્રદાન કરે છે, જેમાં આવશ્યક USB ડ્રાઇવર ઇન્સ્ટોલેશન અને પોર્ટ પસંદગી પ્રક્રિયાઓનો સમાવેશ થાય છે.
પ્રિview M5STAMP C3 ESP32 IoT ડેવલપમેન્ટ બોર્ડ યુઝર મેન્યુઅલ
M5ST નું અન્વેષણ કરોAMP C3, M5Stack નું સૌથી નાનું ESP32 સિસ્ટમ બોર્ડ. આ માર્ગદર્શિકા તેની સુવિધાઓ, વિશિષ્ટતાઓની વિગતો આપે છે અને Arduino IDE, બ્લૂટૂથ અને WiFi વિકાસ માટે ઝડપી શરૂઆત માર્ગદર્શિકાઓ પ્રદાન કરે છે, જે તેને IoT એપ્લિકેશનો માટે આદર્શ બનાવે છે.
પ્રિview M5Stack AtomU: ESP32 IoT Speech Recognition Development Board Guide
A guide to the M5Stack AtomU, a compact IoT speech recognition development board featuring the ESP32-PICO-D4 module. Learn about its specifications, setup with Arduino IDE, Bluetooth serial communication, and Wi-Fi scanning capabilities.