ટોર્ક ઇલેક્ટ્રોનિક ટાઈમર 365 દિવસ SPDT સૂચના માર્ગદર્શિકા

1. પરિચય

This manual provides detailed instructions for the installation, programming, operation, and maintenance of your Tork Electronic Timer 365 Days SPDT. Please read this manual thoroughly before installation and operation to ensure proper use and to prevent damage to the unit or injury.

The Tork Electronic Timer is designed for precise control of electrical loads over a 365-day period, featuring multiple programming options and a raintight enclosure for outdoor or damp સ્થાન એપ્લિકેશન.

2. સલામતી માહિતી

ચેતવણી: Risk of electric shock. Installation and servicing should be performed by qualified personnel only. Disconnect power at the circuit breaker or fuse before installing or servicing.

• હંમેશા સ્થાનિક વિદ્યુત કોડ અને નિયમોનું પાલન કરો.
• Ensure the timer is installed in a suitable environment, protected from extreme temperatures and direct sunlight beyond its specified operating range.
• Do not exceed the maximum electrical ratings of the timer.
• Keep the enclosure door securely closed to maintain its raintight rating.

3. ઉત્પાદન ઓવરview

The Tork Electronic Timer 365 Days SPDT is a versatile digital timer designed for various applications requiring scheduled ON/OFF control. It features a Single-Pole Double-Throw (SPDT) switch configuration, allowing for flexible wiring options.

આકૃતિ 1: Tork Electronic Timer 365 Days SPDT. This image shows the timer unit with its raintight enclosure open, revealing the digital display, control buttons, and wiring terminals inside. The enclosure is gray, and the timer face is black with red buttons.

મુખ્ય લક્ષણો:

• 365-day programming capability.
• Multiple ON/OFF events per day.
• Single-Pole Double-Throw (SPDT) output.
• Digital display for easy programming and status viewing
• Raintight enclosure for outdoor and damp સ્થાનનો ઉપયોગ.
• Battery backup for program retention during power outages

4. સેટઅપ અને ઇન્સ્ટોલેશન

4.1 Mounting the Timer

1. Select a suitable mounting location that is easily accessible for programming and viewing, and within reach of power and load wiring.
2. Use appropriate screws and anchors to securely mount the timer enclosure to a wall or flat surface. Ensure the enclosure is level.

4.2 વાયરિંગ સૂચનાઓ

મહત્વપૂર્ણ: Ensure all power is disconnected before proceeding with wiring.

1. Open the timer enclosure.
2. ઇનકમિંગ લાઇન વોલ્યુમ કનેક્ટ કરોtage (L) to the designated "LINE" terminal.
3. Connect the neutral wire (N) to the designated "NEUTRAL" terminal.
4. For the load, connect the common wire to the "COMMON" terminal of the SPDT switch.
5. Connect the normally open (NO) load wire to the "NO" terminal for loads that should be ON when the timer is active.
6. Connect the normally closed (NC) load wire to the "NC" terminal for loads that should be OFF when the timer is active.
7. ખાતરી કરો કે બધા જોડાણો ચુસ્ત અને સુરક્ષિત છે.
8. Close the enclosure door securely.

5. ઓપરેટિંગ સૂચનાઓ

5.1 Initial Power-Up and Time Setting

1. Restore power to the timer. The display should illuminate.
2. If the display is blank or shows incorrect time, press the "RESET" button (if available) or follow the instructions to set the current time and date.
3. Use the "CLOCK" button and arrow keys (UP/DOWN, HOUR/MIN) to set the current time and day of the week.

૫.૨ ચાલુ/બંધ ઇવેન્ટ્સનું પ્રોગ્રામિંગ

The timer allows for multiple ON/OFF programs. Refer to the specific button labels on your unit (e.g., "PROG", "SET", "MODE").

1. Press the "PROG" or "SET" button to enter programming mode.
2. The display will show "1 ON" or similar. Use arrow keys to set the desired ON time for the first event.
3. Select the days of the week for this program (e.g., Mon-Fri, Daily, Individual Days).
4. Press "PROG" or "SET" again to move to "1 OFF" and set the OFF time.
5. Repeat for additional ON/OFF events (e.g., "2 ON", "2 OFF", up to 99 settings).
6. Exit programming mode by pressing the "CLOCK" or "RUN" button.

5.3 મેન્યુઅલ ઓવરરાઇડ

Most timers include a manual override function to temporarily switch the load ON or OFF without affecting the programmed schedule. Look for a "MANUAL" or "OVERRIDE" button.

• Pressing the manual button typically cycles through ON, AUTO, and OFF modes.
• In AUTO mode, the timer follows the programmed schedule.

6. જાળવણી

The Tork Electronic Timer is designed for minimal maintenance. However, periodic checks are recommended.

• સફાઈ: Wipe the exterior of the enclosure with a damp કાપડ ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટનો ઉપયોગ કરશો નહીં.
• બેટરી બેકઅપ: The internal battery provides backup for program retention during power outages. If the display frequently resets or loses time after power interruptions, the battery may need replacement. Consult a qualified electrician for battery replacement.
• ટર્મિનલ જોડાણો: Periodically check wiring terminals for tightness, especially after initial installation and during routine electrical inspections.

7. મુશ્કેલીનિવારણ

If troubleshooting steps do not resolve the issue, contact customer support or a qualified electrician.

8. સ્પષ્ટીકરણો

• મોડલ: 365 Days Op. Mode SPDT
• બ્રાન્ડ: ટોર્ક
• ઇનપુટ વોલ્યુમtage: [સંtage Range, e.g., 120-277V AC] (Not provided in input, please refer to product label)
• આઉટપુટ: Single-Pole Double-Throw (SPDT)
• સંપર્ક રેટિંગ: [Amperage, e.g., 40A Resistive] (Not provided in input, please refer to product label)
• પ્રોગ્રામિંગ: 365-day, up to 99 ON/OFF events
• બિડાણ: Raintight (NEMA 3R equivalent)
• સામગ્રી: પ્લાસ્ટિક
• રંગ: Black (Timer face), Gray (Enclosure)
• ઓપરેટિંગ તાપમાન: [તાપમાન ની હદ] (Not provided in input, please refer to product label)

નોંધ: ચોક્કસ વિદ્યુત રેટિંગ્સ (વોલ્યુમtage, amperage) and operating temperature are not available in the provided product data. Please refer to the product label on your unit for precise specifications.

9. વોરંટી અને સપોર્ટ

ઉત્પાદન વોરંટી અને ગ્રાહક સપોર્ટ સંબંધિત માહિતી સામાન્ય રીતે ઉત્પાદન પેકેજિંગ અથવા ઉત્પાદકના સત્તાવાર દસ્તાવેજ પર પૂરી પાડવામાં આવે છે. webસાઇટ. વોરંટી દાવાઓ માટે કૃપા કરીને તમારી ખરીદીનો પુરાવો રાખો.

For technical assistance or to inquire about warranty service, please contact the manufacturer or your point of purchase. Have your product model and purchase date available.

ઑનલાઇન સંસાધનો: For the latest information, FAQs, and additional support, visit the official Tork website (if applicable).