ઝિગ્મેટેક એરો બ્લેક માઇક્રો-એટીએક્સ કેસ યુઝર મેન્યુઅલ

1. પરિચય

This manual provides detailed instructions for the installation, operation, and maintenance of your Xigmatek Aero Black Micro-ATX Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and to maximize the lifespan of your components.

2. ઉત્પાદન ઓવરview

The Xigmatek Aero is a compact Micro-ATX PC case designed for efficient component housing and airflow. It features a simple and stylish design, incorporating a tempered glass front panel and an acrylic side panel for visibility of internal components.

આકૃતિ 2.1: આગળ-ડાબે view of the Xigmatek Aero Black Micro-ATX Case, showcasing the tempered glass front panel and acrylic side panel.

3. મુખ્ય લક્ષણો

• ટેમ્પર્ડ ગ્લાસ સાઇડ પેનલ: સ્પષ્ટતા પૂરી પાડે છે view of internal components.
• Bottom Mounted PSU: Dedicated compartment for power supply unit, aiding in thermal management and cable routing.
• Mesh Design Front Panel: Enhances airflow for improved cooling performance.
• સરળ કેબલ મેનેજમેન્ટ: Designed with routing options and a PSU shroud to facilitate neat cable organization.
• Compact Micro-ATX Form Factor: Optimized for smaller builds while maintaining compatibility with standard components.

4. પેકેજ સામગ્રી

Please verify that all items are present in the package before proceeding with installation:

• Xigmatek Aero Black Micro-ATX Case
• Accessory Box (containing screws, standoffs, zip ties)
• વપરાશકર્તા માર્ગદર્શિકા (આ દસ્તાવેજ)

5. સેટઅપ અને ઇન્સ્ટોલેશન

Follow these steps carefully for proper installation of your PC components into the Xigmatek Aero case.

૪.૧ કેસ તૈયાર કરવો

1. કેસને સપાટ, સ્થિર સપાટી પર મૂકો.
2. Carefully remove the tempered glass side panel by unscrewing the four thumb screws. Set the panel aside on a soft, non-abrasive surface to prevent scratches.
3. Remove the rear side panel (solid metal panel) by unscrewing the two thumb screws at the back and sliding it off. This provides access for cable management.

આકૃતિ 5.1: બાજુ view of the case, showing the tempered glass panel secured by four thumb screws.

5.2 પાવર સપ્લાય યુનિટ (PSU) સ્થાપન

1. Locate the PSU mounting area at the bottom rear of the case, within the PSU shroud.
2. Slide your PSU into the designated slot from the rear of the case. Ensure the PSU fan faces downwards (if the case has a bottom vent) or upwards, depending on your cooling preference and PSU design.
3. કેસના પાછળના ભાગમાંથી સ્ક્રૂ વડે PSU ને સુરક્ષિત કરો.
4. Route necessary PSU cables through the cutouts in the PSU shroud to the main compartment.

આકૃતિ 5.2: આંતરિક view highlighting the PSU shroud and cable routing options.

5.3 મધરબોર્ડ સ્થાપન

1. Install the I/O shield (if applicable) into the rear opening of the case.
2. Align your Micro-ATX motherboard with the pre-installed standoffs. Ensure the screw holes on the motherboard match the standoffs.
3. Secure the motherboard using the provided screws. Do not overtighten.

આકૃતિ 5.3: આંતરિક view of the case, showing the motherboard tray and standoff locations.

5.4 Storage Drive Installation

The case supports 3.5-inch HDDs and 2.5-inch SSDs.

• ૩.૫" એચડીડી: Locate the drive cage under the PSU shroud. Slide the HDD into the drive bay and secure with screws. Note: Some users find it easier to remove the drive caddy by unscrewing from the underside of the case first.
• ૨.૫" એસએસડી: SSDs can typically be mounted on dedicated brackets behind the motherboard tray or on top of the PSU shroud. Secure with screws.

5.5 Graphics Card and Expansion Cards

1. Remove the necessary expansion slot covers from the rear of the case. These are break-off covers, so bend them carefully until they detach.
2. Insert your graphics card or other expansion cards into the appropriate PCIe slots on your motherboard.
3. Secure the cards with screws.

આકૃતિ 5.4: પાછળ view of the case, showing expansion slots and I/O shield opening.

5.6 Fan and Cooling Installation

The Xigmatek Aero supports multiple fan configurations for optimal airflow.

• આગળ: Up to 2x 120mm or 140mm fans. Can also support a 240mm AIO liquid cooler.
• ટોચ: Up to 2x 120mm fans.
• પાછળ: 1x 120mm fan.

Install fans by aligning them with the screw holes and securing them with fan screws. Pay attention to airflow direction (intake vs. exhaust).

5.7 કેબલ મેનેજમેન્ટ

Utilize the cutouts and tie-down points behind the motherboard tray to route and secure cables. This improves airflow and aesthetics.

આકૃતિ 5.5: View from the rear of the motherboard tray, showing space for cable routing.

5.8 ફ્રન્ટ પેનલ કનેક્શન્સ

Connect the front panel cables (USB 3.0, USB 2.0, Audio, Power LED, HDD LED, Power Switch, Reset Switch) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

આકૃતિ 5.6: ટોચ view of the case, illustrating the front I/O ports including USB 3.0 and audio jacks.

5.9 અંતિમ એસેમ્બલી

1. Once all components are installed and cables are managed, reattach the rear side panel.
2. Carefully reattach the tempered glass side panel and secure it with the four thumb screws.

૫. સંચાલન બાબતો

To ensure optimal performance and longevity of your system:

• એરફ્લો: Ensure proper fan configuration for intake and exhaust to maintain good internal temperatures. The mesh front panel is designed for excellent air intake.
• પ્લેસમેન્ટ: Place the PC case on a hard, flat surface to allow adequate airflow to the bottom-mounted PSU and any bottom intake fans. Avoid placing it on carpet.

7. જાળવણી

Regular maintenance helps preserve your system's performance and extends its lifespan:

• ધૂળ સફાઈ: Periodically clean dust from the case interior and fan filters. The top panel features a magnetic dust filter for easy removal and cleaning.
• બાહ્ય સફાઈ: સોફ્ટનો ઉપયોગ કરો, ડીamp cloth to clean the exterior surfaces. Avoid abrasive cleaners. For the tempered glass and acrylic panels, use a microfiber cloth and a gentle glass cleaner.

8. મુશ્કેલીનિવારણ

જો તમને એસેમ્બલી દરમિયાન અથવા પછી સમસ્યાઓનો સામનો કરવો પડે, તો નીચેનાનો વિચાર કરો:

• સિસ્ટમ ચાલુ નથી થઈ રહી:
  • Ensure all PSU cables are securely connected to the motherboard and components.
  • ખાતરી કરો કે ફ્રન્ટ પેનલ પાવર સ્વીચ કેબલ મધરબોર્ડ હેડર સાથે યોગ્ય રીતે જોડાયેલ છે.
  • Check the PSU switch is in the 'ON' position.
• ફરતા ન હોય તેવા પંખા:
  • Confirm fan cables are properly connected to motherboard fan headers or a fan controller.
• Poor Airflow/High Temperatures:
  • Check fan orientation (intake/exhaust).
  • Ensure dust filters are clean.
  • Verify no cables are obstructing airflow.

9. સ્પષ્ટીકરણો

10. વોરંટી અને સપોર્ટ

For warranty information and technical support, please refer to the official Xigmatek webસાઇટ પર જાઓ અથવા તમારા સ્થાનિક રિટેલરનો સંપર્ક કરો. વોરંટી દાવાઓ માટે ખરીદીનો પુરાવો રાખો.