પરિચય
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Buderus Para 7M RS 3H Circulator Pump, model 8738901566. Please read these instructions carefully before installation and keep them for future reference.
સલામતી માહિતી
- સ્થાપન અને જાળવણી ફક્ત લાયક કર્મચારીઓ દ્વારા જ થવી જોઈએ.
- કોઈપણ ઇન્સ્ટોલેશન અથવા જાળવણી કાર્ય પહેલાં ખાતરી કરો કે વીજ પુરવઠો ડિસ્કનેક્ટ થઈ ગયો છે.
- The pump operates with electrical current; observe all electrical safety precautions.
- Do not operate the pump if it is damaged or if any parts are missing.
- પંપને ઠંડું તાપમાનથી સુરક્ષિત કરો.
ઉત્પાદન ઓવરview
The Buderus Para 7M RS 3H is a high-efficiency circulator pump designed for heating systems. It ensures optimal circulation of heating water, contributing to the efficient operation of your system.
આકૃતિ 1: Buderus Para 7M RS 3H Circulator Pump. This image shows the pump from a front-side angle, highlighting its compact design, control panel with a green button and indicator lights, and threaded connections. The label indicates it is made by Wilo Intac in France, with model details 'Para 15/7-50/SC' and technical specifications like EEI ≤ 0.20-Part 3, IPX4D, 6-50W, Imax 0.44A, PN10, TF95, 1-230V, 50/60Hz. Two sealing rings are visible in the foreground.
ટેકનિકલ વિશિષ્ટતાઓ
| લક્ષણ | સ્પષ્ટીકરણ |
|---|---|
| ઉત્પાદક | Buderus (Made by Wilo Intac) |
| મોડલ નંબર | 8738901566 (Replaces 7099418 / 4511423) |
| ઉર્જા કાર્યક્ષમતા સૂચકાંક (EEI) | ≤ 0.20-Part 3 |
| રક્ષણ વર્ગ | IPX4D |
| પાવર વપરાશ | 6-50W |
| મહત્તમ વર્તમાન | 0.44 એ |
| નામાંકિત દબાણ | PN10 |
| તાપમાન વર્ગ | TF95 |
| ભાગtage | 1-230V, 50/60Hz |
| સુસંગતતા | Buderus Logamax Plus GB132 T (floor-standing unit) |
સેટઅપ અને ઇન્સ્ટોલેશન
- તૈયારી: Ensure the heating system is depressurized and cooled down. Isolate the section where the pump will be installed using shut-off valves.
- માઉન્ટ કરવાનું: Install the pump in the designated position, ensuring the flow direction arrow on the pump body matches the system's flow. Use the provided sealing rings for a watertight connection.
- ઇલેક્ટ્રિકલ કનેક્શન: Connect the pump to the electrical supply according to local regulations and the wiring diagram provided with the pump (not included in this general manual). Ensure proper grounding.
- Filling and Venting: After installation, refill the heating system and thoroughly vent all air from the system and the pump. This is crucial for proper operation and to prevent damage.
- પ્રારંભિક સ્ટાર્ટ-અપ: Gradually open the shut-off valves and restore power to the pump. Observe for leaks and unusual noises.
ઓપરેટિંગ સૂચનાઓ
The Buderus Para 7M RS 3H pump features a user-friendly control interface. Refer to Figure 1 for visual reference of the control panel.
- પાવર બટન: The green button on the control panel is used to switch the pump ON/OFF and to cycle through operating modes.
- ઓપરેટિંગ મોડ્સ: The pump typically offers several operating modes (e.g., constant pressure, proportional pressure, fixed speed). Press the green button briefly to cycle through these modes. Indicator lights will show the currently selected mode.
- સ્થિતિ સૂચકાંકો: LED lights on the panel indicate the pump's operational status and selected mode. Consult the specific wiring diagram or detailed product sheet for a full explanation of each indicator.
જાળવણી
Regular maintenance ensures the longevity and efficient operation of your circulator pump.
- વાર્ષિક નિરીક્ષણ: Have a qualified technician inspect the pump annually for wear, leaks, and proper operation.
- સિસ્ટમ પાણીની ગુણવત્તા: Ensure the heating system water is clean and treated to prevent corrosion and scale buildup, which can affect pump performance.
- સફાઈ: Keep the exterior of the pump clean and free from dust and debris to ensure proper heat dissipation.
- વેન્ટિંગ: Periodically check and vent the heating system to remove any trapped air, which can cause noise and reduce efficiency.
મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| પંપ ચાલુ થતો નથી | No power supply; Motor blocked; Incorrect wiring | Check power connection and circuit breaker; Consult a qualified technician to unblock motor or check wiring. |
| Pump runs but no circulation | Air in system; Valves closed; Impeller blocked | Vent the system thoroughly; Open all relevant valves; Consult a qualified technician to inspect impeller. |
| અસામાન્ય અવાજ/કંપન | Air in system; Cavitation; Loose mounting; Bearing wear | Vent the system; Check system pressure; Secure mounting; Consult a qualified technician for bearing inspection. |
| લીકેજ | છૂટા જોડાણો; ક્ષતિગ્રસ્ત સીલ | Tighten connections; Replace damaged seals (requires professional service). |
વોરંટી અને આધાર
For warranty information, please refer to the documentation provided at the time of purchase or contact your Buderus dealer. Technical support can be obtained through authorized Buderus service partners.
