LIGHTAILING LED Light Kit for LEGO 10293 Santa's Visit Model - Remote-Control Version Instruction Manual

1. પરિચય

This manual provides detailed instructions for the installation and operation of the LIGHTAILING LED Light Kit, remote-control version, specifically designed for the LEGO 10293 Santa's Visit building blocks model. This kit enhances the visual appeal of your LEGO model by adding integrated lighting. Please note that the LEGO model itself is not included with this light kit.

2. સલામતી માહિતી

• નાના ભાગો ચેતવણી: આ ઉત્પાદનમાં નાના ભાગો છે અને ગૂંગળામણના જોખમોને કારણે તે 6 વર્ષથી ઓછી ઉંમરના બાળકો માટે યોગ્ય નથી.
• પાવર સપ્લાય: Use three AA batteries or a USB charger with a voltage less than 5V. Exceeding 5V may damage the light kit.
• Handling Wires: Install LED lights carefully. Avoid hard pulling, bending, or shaking the wires to prevent damage.
• ઇલેક્ટ્રિકલ સલામતી: Ensure all connections are secure before applying power. Do not expose the light kit to water or extreme temperatures.

3. પેકેજ સામગ્રી

ખાતરી કરો કે નીચે સૂચિબદ્ધ બધા ઘટકો તમારા પેકેજમાં હાજર છે:

• LED Light Kits (3 USB light kits)
• રીમોટ કંટ્રોલ
• સૂચના માર્ગદર્શિકા
• Battery Box (requires 3 AA batteries, not included)

4. સેટઅપ

The installation of the light kit is integrated with the LEGO model. It is recommended to follow the detailed instruction guide provided in the package for specific placement of each LED component. The general steps are as follows:

1. Prepare the LEGO Model: Ensure your LEGO 10293 Santa's Visit model is assembled or partially disassembled as required by the instruction guide to access specific areas for light placement.
2. Install LED Components: Carefully place the LED lights and wires according to the step-by-step instructions. The wires are designed to be thin and can be routed between LEGO bricks.
3. Connect to USB Hubs: Connect the individual LED light kits to the provided USB hubs.
4. પાવર કનેક્શન: Insert three AA batteries into the battery box or connect the USB power cable to a compatible USB power source (less than 5V).
5. ટેસ્ટ લાઇટ્સ: Before fully reassembling the LEGO model, test all lights to ensure they are functioning correctly.

5. ઓપરેટિંગ સૂચનાઓ

The LIGHTAILING LED Light Kit for LEGO 10293 Santa's Visit features a remote control for convenient operation.

5.1 પાવરિંગ ચાલુ/બંધ

Once the light kit is connected to a power source, the lights can be turned on or off using the remote control.

5.2 Adjusting Light Colors and Modes

The remote control allows you to switch between different light colors and modes, enhancing the display of your LEGO model. Refer to the remote control diagram in the instruction guide for specific button functions.

6. જાળવણી

• સફાઈ: Use a soft, dry cloth to gently wipe any dust from the LED components and wires. Do not use liquid cleaners.
• બેટરી રિપ્લેસમેન્ટ: If using the battery box, replace all three AA batteries when the lights dim or stop working. Ensure correct polarity.
• સંગ્રહ: When not in use for extended periods, disconnect the power source and store the LEGO model and light kit in a cool, dry place away from direct sunlight.

7. મુશ્કેલીનિવારણ

8. સ્પષ્ટીકરણો

9. વોરંટી અને સપોર્ટ

LIGHTAILING is committed to providing quality products and services. If you encounter any problems with your LED Light Kit, please do not hesitate to contact customer support.

• સંપર્ક માહિતી: Refer to the contact details provided in your product packaging or visit the official LIGHTAILING webઆધાર માટે સાઇટ.
• વોરંટી: Specific warranty details are typically included with the product documentation. Please retain your proof of purchase for warranty claims.