AUTOOL CT400 Fuel Injector Cleaner and Tester Machine

પરિચય

The AUTOOL CT400 is a professional fuel injector cleaner and tester machine designed for comprehensive maintenance of fuel injection systems. It supports cleaning and testing of GDI, EFI, and FSI injectors across various petrol vehicles. This manual provides detailed instructions for safe and effective operation of the device.

સલામતી માહિતી

• Use only professional test liquid and cleaning liquid. Avoid flammable and harmful solvents.
• Do not add cleaning liquid to the glass tube.
• Ensure proper ventilation when operating the machine to prevent accumulation of fumes.
• ઓપરેશન દરમિયાન હંમેશા યોગ્ય વ્યક્તિગત રક્ષણાત્મક ઉપકરણો (PPE) જેમ કે સલામતી ચશ્મા અને મોજા પહેરો.
• The machine's housing is made of sturdy sheet metal; consumable parts can be replaced quickly.
• The test liquid can be recycled, reducing operational costs.

ઉત્પાદન ઓવરview અને ઘટકો

The AUTOOL CT400 features an integrated design for both ultrasonic cleaning and injector testing. It is capable of handling up to 6 injectors simultaneously.

Image: The AUTOOL CT400 machine shown with its various adapters, cables, and accessories. The main unit is yellow and black, featuring a control panel, test tubes, and an ultrasonic cleaning bath.

મુખ્ય ઘટકોમાં શામેલ છે:

• નિયંત્રણ પેનલ સાથે મુખ્ય એકમ
• અલ્ટ્રાસોનિક સફાઈ સ્નાન
• Test Tubes (140ml capacity each)
• Fuel Tank (2000ml capacity)
• પ્રેશર ગેજ
• Various Adapters for different injector types
• Power Cable and Signal Cables
• Portable Drawer for accessory storage

Image: Labeled diagram of the AUTOOL CT400 showing components such as Filling Inlet, Oil Separator, Fixing Bolts, Glass Tube, Drain Switch, Power Switch, Power Socket, Portable Drawer, Control Panel, Pulse Signal Cable, Ultrasonic Cleaning Bath, Pressure Gauge, and Level Gauge.

સેટઅપ

1. અનપેકિંગ: Carefully remove all components from the packaging. Verify that all items listed in the "What's in the Box" section are present.
2. પ્લેસમેન્ટ: Place the machine on a stable, level surface in a well-ventilated area, away from direct sunlight or heat sources.
3. પાવર કનેક્શન: Connect the power cable to the machine's power socket and then to a compatible 110V/220V AC power outlet.
4. Fluid Filling:
   • Open the filling inlet and carefully pour the recommended test liquid into the fuel tank. Ensure the liquid level is within the specified range on the level gauge.
   • For ultrasonic cleaning, add appropriate cleaning liquid to the ultrasonic bath.
5. ઇન્જેક્ટર ઇન્સ્ટોલેશન: Select the correct adapters for your injectors. Install the injectors into the test bench, ensuring a secure fit to prevent leaks.
6. સિગ્નલ કેબલ કનેક્શન: Connect the pulse signal cables from the machine to each injector.

ઓપરેટિંગ સૂચનાઓ

Ultrasonic Injector Cleaning

The ultrasonic cleaning function effectively removes carbon deposits and blockages from injectors.

Image: Multiple fuel injectors submerged in the ultrasonic cleaning bath, connected by red wires, indicating the ultrasonic cleaning process.

1. Place the injectors into the ultrasonic cleaning bath.
2. Ensure the cleaning liquid covers the injector nozzles.
3. Select the "Ultrasonic Cleaning" function from the control panel.
4. Set the desired cleaning time (adjustable from 0-10 minutes).
5. Press "START" to begin the cleaning process.
6. For reverse flushing, install the injectors in the opposite direction after initial cleaning and repeat the process.
7. નોંધ: Only 12V injectors are supported for ultrasonic cleaning. 70V and 120V injectors are not supported for this specific function.

Injector Testing Modes

The CT400 offers 10 testing modes to simulate various driving conditions and diagnose injector performance, including uniformity, atomization, sealing, and injection angle.

Image: The control panel of the AUTOOL CT400 displaying various testing modes and digital readouts for pulse width and injection times.

Available test modes:

1. Idle Test (0-20 ms): Simulates engine idling conditions.
2. Medium-Speed Test (0-7.5 ms): Simulates moderate engine speeds.
3. High-Speed Test (0-4 ms): Simulates high engine speeds.
4. પ્રવેગક પરીક્ષણ: Simulates rapid acceleration.
5. શિફ્ટિંગ સ્પીડ ટેસ્ટ: Simulates gear changes.
6. લીક ચેકિંગ ટેસ્ટ: Checks for fuel leaks from the injectors.
7. નિષ્ક્રિય સ્પ્રે મૂલ્ય પરીક્ષણ: Evaluates spray pattern and volume at idle.
8. મધ્યમ ગતિ સ્પ્રે મૂલ્ય પરીક્ષણ: Evaluates spray pattern and volume at medium speed.
9. હાઇ સ્પીડ સ્પ્રે મૂલ્ય પરીક્ષણ: Evaluates spray pattern and volume at high speed.
10. No-Disassembly Cleaning: Requires connection to C100 special parts for cleaning the combustion chamber or throttle (external accessory).

પરીક્ષણ કરવા માટે:

• Select the desired test mode from the "FUNCTIONS MENU" on the control panel.
• Adjust "FUNCTIONS/PULSE WIDTH ADJUSTMENT" and "WORKING TIME / INJECTING TIMES" as needed using the up/down buttons.
• Press "START" to begin the test.
• Observe the spray pattern, atomization, and volume in the test tubes.
• Press "STOP" to end the test.

GDI, EFI, FSI & Multi-voltage વિકલ્પો

The CT400 is compatible with various injector types and offers multiple voltage outputs to drive different injectors.

Image: A close-up of the AUTOOL CT400 control panel showing the GDI and voltage selection options (12V, 70V, 120V).

• The machine supports standard injectors, GDI (Gasoline Direct Injection), EFI (Electronic Fuel Injection), and FSI (Fuel Stratified Injection) systems.
• વોલ્યુમનો ઉપયોગ કરોtage selection buttons (12V, 70V, 120V) to match the voltage requirements of the injectors being tested.
• This compatibility extends to vehicles from Mercedes-Benz, BMW, Audi, Porsche, Ford, and other direct injection engines.

જાળવણી

• પ્રવાહી વ્યવસ્થાપન: Regularly check the level and condition of the test and cleaning liquids. Replace or recycle test liquid as per local environmental regulations.
• સફાઈ: After each use, clean the test tubes and ultrasonic bath to prevent residue buildup. Use a soft cloth and appropriate cleaning agents.
• ઘટક નિરીક્ષણ: Periodically inspect all hoses, adapters, and electrical connections for wear, cracks, or damage. Replace consumable parts such as O-rings and seals as needed.
• સંગ્રહ: Store the machine in a clean, dry environment when not in use. Utilize the portable drawer for organized storage of accessories to prevent loss or damage.

મુશ્કેલીનિવારણ

This section addresses common operational issues. For problems not listed, contact AUTOOL customer support for assistance.

મશીન ચાલુ થતું નથી

• Check the power cable connection to both the machine and the power outlet.
• ખાતરી કરો કે પાવર સ્વીચ "ચાલુ" સ્થિતિમાં છે.
• Inspect the fuse. If blown, replace it with a fuse of the same rating.

Injectors Not Firing During Test

• Ensure pulse signal cables are securely connected to both the machine and the injectors.
• Verify the correct injector voltage (12V, 70V, 120V) is selected on the control panel for the specific injector type.
• Check if the selected test mode is appropriate for the injector type and condition.

Leaks During Testing

• Confirm that injectors are properly seated and secured with the correct adapters.
• Inspect O-rings and seals for damage and replace if necessary.
• Ensure all connections are tightened appropriately.

Inconsistent Spray Pattern or Volume

• Perform ultrasonic cleaning to remove any blockages within the injectors.
• Ensure the test liquid is clean and free of contaminants.
• Verify the pressure setting is correct for the test being performed.

વિશિષ્ટતાઓ

નોંધ: સ્પષ્ટીકરણો પૂર્વ સૂચના વિના બદલવાને પાત્ર છે.

બૉક્સમાં શું છે

The AUTOOL CT400 package typically includes the following items:

• AUTOOL CT400 Main Unit
• Fuel Injector Cleaner Kit (various adapters and accessories)
• પાવર કેબલ
• Pulse Signal Cables
• ફનલ
• Ultrasonic Bath Cover
• O-rings and Seals
• વપરાશકર્તા માર્ગદર્શિકા (આ દસ્તાવેજ)

Image: A visual representation of the AUTOOL CT400 package contents, including the main unit, various adapters, cables, and other accessories.

વોરંટી અને આધાર

AUTOOL provides a comprehensive warranty and support for the CT400 Fuel Injector Cleaner and Tester Machine:

• ત્રણ વર્ષની વrantરંટી: AUTOOL offers a three-year warranty against any quality problems from the date of purchase.
• Replacement/Solutions: If any defect is found, AUTOOL will provide a new replacement or suitable solutions to ensure customer satisfaction without delay.
• આજીવન ટેકનિકલ સપોર્ટ: Lifetime technical support is provided for the product, ensuring long-term usability and assistance.
• ગ્રાહક સેવા: For any support needs or inquiries, please contact AUTOOL customer service. Responses are typically provided within 24 hours.

For further assistance, please visit the official AUTOOL website or contact their customer support team through the provided channels.