હાયપરએક્સ પલ્સફાયર હેસ્ટ વાયરલેસ ગેમિંગ માઉસ યુઝર મેન્યુઅલ

પરિચય

This manual provides detailed instructions for the setup, operation, and maintenance of your HyperX Pulsefire Haste Wireless Gaming Mouse. Designed for performance, this ultra-lightweight mouse features a responsive sensor, long battery life, and customizable controls to enhance your gaming experience.

Image: The HyperX Pulsefire Haste Wireless Gaming Mouse, showcasing તેની કાળી પૂર્ણાહુતિ અને હનીકોમ્બ શેલ ડિઝાઇન.

બૉક્સમાં શું છે

ખાતરી કરો કે બધા ઘટકો પેકેજમાં હાજર છે:

• હાયપરએક્સ પલ્સફાયર ઉતાવળ વાયરલેસ માઉસ
• યુએસબી વાયરલેસ રીસીવર
• USB Charge/Data Cable (USB-C to USB-A)
• Grip Tape (pre-cut for left/right buttons and side panels)
• વધારાના પીટીએફઇ સ્કેટ
• ઝડપી પ્રારંભ માર્ગદર્શિકા

Image: All included components of the HyperX Pulsefire Haste Wireless Gaming Mouse package, laid out for inspection.

સેટઅપ

૩.૧. માઉસ ચાર્જ કરવું

Before first use, it is recommended to fully charge the mouse. Connect the USB Charge/Data Cable to the mouse's USB-C port and the other end to a powered USB-A port on your computer or a USB wall adapter. The scroll wheel LED will indicate charging status.

2. વાયરલેસ રીતે કનેક્ટ થવું

1. Insert the USB Wireless Receiver into an available USB-A port on your computer.
2. માઉસના તળિયે સ્થિત પાવર સ્વીચનો ઉપયોગ કરીને માઉસ ચાલુ કરો.
3. The mouse should automatically connect to the receiver. The scroll wheel LED will indicate a successful connection.

3. Connecting with Cable

Alternatively, you can use the mouse in wired mode. Connect the USB Charge/Data Cable directly from the mouse to your computer's USB-A port. The mouse will function as a wired mouse and charge simultaneously.

4. Installing HyperX NGENUITY Software

For full customization of DPI settings, button assignments, and RGB lighting, download and install the HyperX NGENUITY software from the official HyperX website. This software allows you to personalize your mouse settings to your preferences.

Image: A computer screen displaying the HyperX NGENUITY software interface, showing customization options for the mouse.

5. Applying Grip Tape and PTFE Skates (Optional)

The package includes optional grip tape for enhanced control and extra PTFE skates for smoother glide. Refer to the diagram below for application.

Image: A diagram illustrating the placement of the included grip tape for the left and right mouse buttons and side panels, along with the extra PTFE skates.

માઉસ ચલાવવું

બટન કાર્યો

• ડાબું ક્લિક કરો: પ્રાથમિક ક્રિયા.
• જમણું બટન દબાવો: ગૌણ ક્રિયા/સંદર્ભ મેનૂ.
• સ્ક્રોલ વ્હીલ: Scroll up/down. Can also be pressed for middle click.
• DPI બટન: Cycles through preset DPI sensitivity levels. Customizable via NGENUITY software.
• બાજુના બટનો (આગળ/પાછળ): Default navigation functions. Programmable via NGENUITY software.

DPI ગોઠવણ

Press the DPI button located behind the scroll wheel to cycle through different sensitivity settings. Default settings are typically 400, 800, 1600, and 3200 DPI, but these can be fully customized in the NGENUITY software.

બેટરી જીવન

The HyperX Pulsefire Haste Wireless Gaming Mouse offers up to 100 hours of battery life on a single charge (with lighting disabled). Battery life may vary based on usage and computing conditions.

Image: The HyperX Pulsefire Haste mouse on a mousepad, with a graphic indicating up to 100 hours of battery life.

જાળવણી

સફાઈ

To clean your mouse, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, ensuring no liquid enters the mouse's internal components. Avoid harsh chemicals or abrasive materials.

The mouse features an anti-dust and water-resistant design, providing a degree of protection against minor spills and dust accumulation. However, it is not fully waterproof and should not be submerged in liquid.

Image: A white HyperX Pulsefire Haste mouse with water droplets on its surface, illustrating its water-resistant feature.

Replacing PTFE Skates

Over time, the PTFE skates on the bottom of your mouse may wear down. The included extra PTFE skates can be used to replace them. Carefully peel off the old skates and apply the new ones, ensuring they are firmly pressed into place.

Image: The underside of the HyperX Pulsefire Haste mouse, showing the placement of the PTFE skates and the power switch.

મુશ્કેલીનિવારણ

માઉસ જવાબ નથી આપી રહ્યો

• Ensure the mouse is charged. Connect it via the USB cable to charge and test functionality.
• Verify the USB Wireless Receiver is securely plugged into a working USB port. Try a different USB port.
• Make sure the mouse's power switch is in the 'ON' position.
• If using wirelessly, try re-pairing the mouse with the receiver (refer to HyperX NGENUITY software or support documentation for specific steps).

DPI સેટિંગ્સ બદલાતી નથી

• Ensure the HyperX NGENUITY software is installed and up to date.
• Check if custom DPI profiles are correctly saved and active within the software.

Intermittent Wireless Connection

• Move the USB Wireless Receiver closer to the mouse, ideally to a front USB port or using a USB extension cable.
• Avoid placing the receiver near other wireless devices or sources of interference (e.g., Wi-Fi routers, cordless phones).
• Ensure the mouse is fully charged. Low battery can affect wireless performance.

વિશિષ્ટતાઓ

વોરંટી માહિતી

HyperX products are covered by a limited warranty. The specific warranty period and terms may vary by region and product. Please retain your proof of purchase for warranty claims.

For detailed warranty information, visit the official HyperX website or contact HyperX customer support.

આધાર

If you encounter any issues not covered in this manual or require further assistance, please refer to the following resources:

• હાયપરએક્સ ઓફિશિયલ Webસાઇટ: www.hyperx.com
• HyperX Support Page: Access FAQs, drivers, and contact information for technical support.
• HyperX NGENUITY સોફ્ટવેર: Download the latest version for customization and firmware updates.