UNV UN-NVR301-08X-P8 Network Video Recorder User Manual

1. પરિચય

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your UNV UN-NVR301-08X-P8 8-Channel 8-PoE Ultra265 Network Video Recorder. This device supports Ultra 265/H.265/H.264 video formats, 8-channel input, and up to 8MP resolution recording. It is compatible with mainstream ONVIF (Profile એસ, પ્રોfile જી, પ્રોfile T) and RTSP protocols. The NVR features 1-ch HDMI and 1-ch VGA outputs, with HDMI supporting up to 4K (3840x2160) resolution, and simultaneous HDMI and VGA output. It supports one SATA HDD up to 8TB (hard drive sold separately) and cloud upgrade functionality.

આગળ view of the UNV UN-NVR301-08X-P8 Network Video Recorder, showing the UNV logo and indicator lights for RUN, NET, and HD.

2. સેટઅપ

2.1. શારીરિક જોડાણો

Before powering on your NVR, ensure all necessary physical connections are made. The rear panel of the NVR includes various ports for cameras, network, and display.

• પાવર ઇનપુટ: Connect the provided power adapter to the DC 48V input port.
• PoE પોર્ટ્સ: Connect your PoE-enabled IP cameras to the 8-PoE ports (labeled 1-8). These ports provide both power and data to the cameras.
• LAN પોર્ટ: Connect the NVR to your network router or switch using an Ethernet cable via the LAN port.
• વિડિઓ આઉટપુટ: Connect a monitor to the NVR using either the HDMI or VGA port. The HDMI port supports up to 4K resolution.
• યુએસબી પોર્ટ્સ: Use the USB ports for connecting a mouse for navigation or for external storage devices for backup/firmware updates.
• ઓડિયો આઉટપુટ: An audio output port is available for connecting external speakers.

2.2. Network and Camera Configuration

To integrate WiFi cameras with your PoE NVR, ensure both the NVR and the WiFi camera are on the same Local Area Network (LAN) initially. This typically involves connecting both devices to the same router.

1. NVR ને રાઉટર સાથે કનેક્ટ કરો: Use an Ethernet cable to connect your PoE NVR to a LAN port on your router.
2. Connect WiFi Camera to Router (Initial Setup): Temporarily connect your WiFi camera to another LAN port on the same router using an Ethernet cable. Ensure the WiFi camera is powered on.
3. Connect WiFi Camera to Router's WiFi: Launch the Reolink App on your mobile device. The app should automatically detect the camera. Initialize the camera by creating a login password and naming it. Then, select your WiFi network and enter the password to connect the camera to the router's WiFi. Once connected, you can disconnect the Ethernet cable from the WiFi camera.
4. Add Camera to PoE NVR: Log in to your NVR via the connected monitor. Navigate to the settings, then to the 'Channel' menu. Enable the 'Auto Add' option. The NVR should automatically detect and add the WiFi camera. If prompted, click 'Modify' to enter the camera's login password you set during app initialization.

Once these steps are complete, you should be able to view the live feed of your WiFi camera through the NVR.

Ope. Opeપરેટિંગ

3.1. જીવંત View અને ડિસ્પ્લે

After successful setup, the NVR will display live feeds from connected cameras on your monitor. You can typically switch between single-camera view, મલ્ટી-કેમેરા ગ્રીડ views (e.g., 4-channel, 8-channel), and sequence views.

૪.૩. રેકોર્ડિંગ રૂપરેખાંકન

The NVR allows for flexible recording settings:

• ઠરાવ: Adjust recording resolution for both main stream (up to 8MP) and sub stream.
• ફ્રેમ રેટ (FPS): Configure the frames per second for smoother or more storage-efficient recording.
• Max Bitrate (Kbps): Set the maximum bitrate to control video quality and file કદ
• રેકોર્ડિંગ સમયપત્રક: Customize recording times based on days of the week and hours. Options usually include continuous recording, motion-triggered recording, or no recording during specific periods.
• Post-Motion Recording Duration: Define how long the NVR continues to record after a motion event is detected.
• ઓવરરાઇટ: Enable this feature to automatically overwrite the oldest recordings when the hard drive storage is full.

3.3. Playback and Search

ઍક્સેસ રેકોર્ડ footage through the NVR's interface or mobile app:

• શોધો: માટે શોધો recordings by date, time, and event type (e.g., motion detection).
• પ્લેબેક નિયંત્રણો: Use standard playback controls (play, pause, fast forward, slow forward) to review footage.
• ઇવેન્ટ લોગ: Review a log of system events and alarms.

3.4. ગતિ શોધ અને એલાર્મ્સ

Configure motion detection to trigger recordings and alerts:

• ગતિ શોધ સક્ષમ કરો: Activate motion detection for specific camera channels.
• સંવેદનશીલતા: Adjust the sensitivity level to prevent false alarms from minor movements (e.g., leaves blowing).
• મોશન ઝોન: કેમેરાની અંદર ચોક્કસ વિસ્તારો વ્યાખ્યાયિત કરો view where motion detection should be active or ignored (privacy mask).
• એલાર્મ શેડ્યૂલ: Set specific times or days for motion detection alarms to be active.
• Alarm Actions: Configure actions to be taken when an alarm is triggered, such as sending email alerts, push notifications to a mobile app, or activating a buzzer.

3.5. Remote Access (Mobile App)

The mobile app provides convenient remote access to your NVR and cameras:

• જીવંત View: View live feeds from all connected cameras.
• પ્લેબેક: Access and play back recorded footage.
• સેટિંગ્સ: Adjust various camera and NVR settings remotely, including motion detection, recording schedules, and notification preferences.
• દબાણ સૂચનાઓ: Receive real-time alerts on your mobile device when motion is detected.

4. જાળવણી

4.1. Hard Drive Management

Regularly check the status of your hard drive to ensure optimal recording performance.

• ક્ષમતા તપાસ: Monitor the remaining storage capacity of your installed HDD.
• ફોર્મેટિંગ: Format the HDD as needed, which will erase all recorded data.

4.2. ફર્મવેર અપડેટ્સ

Keep your NVR's firmware updated to ensure the latest features, security patches, and performance improvements.

• ક્લાઉડ અપગ્રેડ: The NVR supports cloud upgrade for convenient firmware updates.
• યુએસબી અપગ્રેડ: Firmware can also be updated via a USB drive.

4.3. System Reboot and Shutdown

For optimal performance, occasional system reboots are recommended. The NVR can be configured for automatic reboots on a schedule (e.g., every Sunday at 2 AM).

• રીબૂટ કરો: Restart the NVR system.
• શટડાઉન: Power off the NVR system safely.

5. મુશ્કેલીનિવારણ

આ વિભાગ તમારા NVR સાથે તમને આવી શકે તેવી સામાન્ય સમસ્યાઓને સંબોધિત કરે છે.

• વિડિઓ નુકશાન: Check camera power and network connections. Ensure cameras are properly added to the NVR.
• HDD Full/Error: Verify hard drive health and capacity. Format the HDD if necessary (this will erase all data). Ensure overwrite is enabled if continuous recording is desired.
• Network Disconnected: Check Ethernet cable connection to the router/switch. Verify router status.
• IP વિરોધાભાસ: Ensure all devices on your network have unique IP addresses. Configure network settings to use DHCP or assign static IPs carefully.
• No Push Notifications: Verify that push notifications are enabled in both the NVR settings and the mobile app settings for the specific camera channels. Check mobile device notification settings.
• કોઈ ઑડિયો નથી: Ensure 'Record Audio' is enabled in the camera recording settings.

6. સ્પષ્ટીકરણો

7. વોરંટી અને સપોર્ટ

For warranty information, please refer to the documentation provided with your purchase or contact UNV customer support directly. Additional protection plans may be available for purchase.

ઉત્પાદક: યુનિview