DEWENWILS IT101 ઇન્ડોર વાયરલેસ રિમોટ કંટ્રોલ આઉટલેટ સૂચના માર્ગદર્શિકા

1. પરિચય

This manual provides essential information for the safe and efficient operation of your DEWENWILS IT101 Indoor Wireless Remote Control Outlet. This device allows you to wirelessly control indoor electrical appliances with ease, offering convenience and energy savings. Please read these instructions thoroughly before use and retain them for future reference.

Image 1: DEWENWILS IT101 Indoor Wireless Remote Control Outlet and Remote

The DEWENWILS IT101 system includes one compact plug-in receiver and one remote control. It operates on RF (Radio Frequency) technology, allowing control through walls and doors up to 100 feet in open areas without requiring Wi-Fi or complex wiring.

2. સલામતી માહિતી

આગ, ઇલેક્ટ્રિક આંચકો અથવા વ્યક્તિગત ઈજાના જોખમને ઘટાડવા માટે, કૃપા કરીને આ સૂચનાઓને અનુસરો:

• માત્ર ઇન્ડોર ઉપયોગ માટે. ઉચ્ચ ભેજ, ઉચ્ચ તાપમાન અને ઉચ્ચ ચુંબકીય ક્ષેત્રોને ટાળો.
• Do not connect any devices that may exceed the maximum limits of 15A/1875W.
• મુખ્ય આઉટલેટમાં સોય અથવા અન્ય કોઈપણ ધાતુની વસ્તુઓ દાખલ કરશો નહીં.
• Do not disassemble or repair the product. Only use authorized service personnel.
• Children are not allowed to use remote control outlets without adult supervision.
• To avoid the danger of suffocation and choking, keep them away from packing materials.
• Ensure the plug is fully inserted so it is not loose or wobbly.
• Used batteries should be disposed of properly and in accordance with environmental protection standards.

3. પેકેજ સામગ્રી

પેકેજમાં નીચેની વસ્તુઓ શામેલ છે:

• 1 x Remote Control Receiver (Outlet)
• 1 x Remote Transmitter (Wall Switch Style)
• 1 x 23A 12V Battery (Installed in remote)
• 2 x Screws (for wall mounting remote)
• 1 x વપરાશકર્તા માર્ગદર્શિકા

4. સેટઅપ

The DEWENWILS IT101 is designed for immediate use with no complex setup required. The remote control and outlet are pre-programmed at the factory.

1. રિમોટ બેટરી ઇન્સ્ટોલ કરો: The remote control comes with a pre-installed 23A 12V battery. Before first use, gently pull out the plastic insulation tab from the battery compartment on the back of the remote.
2. રીસીવર પ્લગ ઇન કરો: Insert the remote control outlet (receiver) into any standard 3-prong grounded wall outlet. Ensure it is firmly seated.
3. તમારા ઉપકરણને કનેક્ટ કરો: Plug your desired appliance (e.g., lamp, fan, coffee maker) into the remote control outlet.
4. Mount the Remote (Optional): The remote control can be used as a handheld device or mounted to a wall. To mount, remove the back plate by sliding it downwards. Use the provided screws to secure the back plate to the wall, then slide the remote control back onto the mounted plate.

Image 2: Compact design ensures the second wall outlet remains accessible.

5. ઓપરેટિંગ સૂચનાઓ

Once set up, operating the DEWENWILS IT101 is straightforward:

1. ચાલુ કરો: Press the 'ON' button on the remote control. The red indicator light on the remote will illuminate, and the connected appliance will turn on.
2. બંધ કરો: Press the 'OFF' button on the remote control. The red indicator light on the remote will turn off, and the connected appliance will power down.
3. મેન્યુઅલ નિયંત્રણ: The receiver unit itself has a manual ON/OFF button. Press this button to toggle the power state of the connected appliance directly at the outlet.

The strong RF signal allows control up to 100 feet in open areas, penetrating through walls and doors, providing flexible placement options for your appliances.

Image 3: The 100ft RF range allows control from anywhere in your home.

6. Programming (Pairing)

The DEWENWILS IT101 features a learning function, allowing you to add more remote controls or outlets (of the same model) to expand your system. The codes will be changed each time after re-programming by variable learning codes technology.

1. Prepare the Receiver: દિવાલના આઉટલેટમાંથી રીસીવરને અનપ્લગ કરો.
2. લર્નિંગ મોડ દાખલ કરો: Press and hold the 'ON/OFF' button on the side of the receiver. While holding the button, plug the receiver back into the wall outlet. The indicator light on the receiver will start to flash slowly, indicating it is in learning mode.
3. રિમોટ સાથે જોડી બનાવો: Release the 'ON/OFF' button on the receiver. Then, press either the 'ON' or 'OFF' button on the remote control you wish to pair. The indicator light on the receiver will stop flashing and remain solid for a few seconds, then turn off, confirming successful pairing.

You can pair multiple remote controls to one receiver, or one remote control to multiple receivers.

7. Unpairing (Resetting)

To unpair a remote control from a receiver, or to reset the receiver:

1. Prepare the Receiver: દિવાલના આઉટલેટમાંથી રીસીવરને અનપ્લગ કરો.
2. Enter Reset Mode: Press and hold the 'ON/OFF' button on the side of the receiver. While holding the button, plug the receiver back into the wall outlet. The indicator light on the receiver will flash rapidly for approximately 5 seconds, then turn off.
3. રીસેટની પુષ્ટિ કરો: Release the 'ON/OFF' button. The rapid flashing indicates that the receiver has been successfully reset and all previous pairings are cleared.

8. બેટરી રિપ્લેસમેન્ટ

The remote control uses one 23A 12V battery. If the remote's indicator light becomes dim or the remote stops responding, it's time to replace the battery.

1. બેટરી કમ્પાર્ટમેન્ટ ખોલો: Slide the back cover of the remote control downwards to open the battery compartment.
2. જૂની બેટરી કાઢી નાખો: Carefully remove the old 23A 12V battery.
3. નવી બેટરી દાખલ કરો: Insert a new 23A 12V battery, ensuring the positive (+) and negative (-) terminals are correctly aligned.
4. બંધ કમ્પાર્ટમેન્ટ: જ્યાં સુધી તે સુરક્ષિત રીતે ક્લિક ન કરે ત્યાં સુધી પાછલા કવરને ફરીથી સ્થાને સ્લાઇડ કરો.

9. મુશ્કેલીનિવારણ

10. સ્પષ્ટીકરણો

11. વોરંટી અને સપોર્ટ

This DEWENWILS product is covered by a One Year Limited Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For technical support, troubleshooting assistance, or warranty claims, please contact DEWENWILS customer service. Please have your model number (IT101) and purchase information ready when contacting support.