પરિચય
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Thermalright Assassin King 120 SE ARGB CPU Air Cooler. Please read this guide thoroughly before proceeding with installation to ensure proper function and longevity of the product. This cooler is designed to provide efficient thermal management for compatible Intel and AMD processors.
પેકેજ સામગ્રી
ખાતરી કરો કે નીચે સૂચિબદ્ધ બધા ઘટકો તમારા પેકેજમાં હાજર છે:
- Thermalright AK120 SE ARGB Heatsink (x1)
- TL-C12C-S PWM Fan (x1)
- સૂચના માર્ગદર્શિકા (x1)
- વોરંટી કાર્ડ (x1)
- LGA115X/1200/17XX Backplate (x1)
- Intel Mounting Brackets (x2)
- AMD Mounting Brackets (x2)
- Fan Buckles (x2 pairs)
- TF4 Thermal Paste (x1 tube)
- Blue Gel Columns (LGA1700 Screws) (x4)
- Red Gel Columns (AMD Screws) (x4)
- Black Gel Columns (Intel Screws) (x4)
- AMD/Intel Mounting Screws (x4)
વિશિષ્ટતાઓ
| લક્ષણ | સ્પષ્ટીકરણ |
|---|---|
| મોડલ | AK120 SE ARGB |
| CPU Cooler Dimensions (L x W x H) | 120mm x 73mm x 148mm (4.92 x 2.87 x 5.83 ઇંચ) |
| ઉત્પાદન વજન | 0.52 કિગ્રા (1.15 lb) |
| Heatsink Material | Aluminum fins, 5x6mm copper heat pipes |
| ફેન મોડલ | TL-C12C-S |
| ફેન પરિમાણો | 120mm x 120mm x 25mm (4.72 x 4.72 x 0.98 ઇંચ) |
| ચાહક ઝડપ | 1550 RPM ±10% (PWM controlled) |
| હવાનો પ્રવાહ | 66.17 CFM (MAX) |
| અવાજ સ્તર | ≤25.6 dB(A) |
| પાવર કનેક્ટર | 4-Pin PWM |
| ભાગtage | 12 વી |
| વાટtage | 3.6 વોટ્સ |
| બેરિંગ પ્રકાર | S-FDB Bearing |
| CPU સોકેટ સુસંગતતા | Intel: LGA115X/1200/1700/17XX; AMD: AM4/AM5 |
| ARGB કનેક્ટર | 5V 3-Pin ARGB |
સેટઅપ અને ઇન્સ્ટોલેશન
Before beginning installation, ensure your system is powered off and disconnected from the power source. Refer to your motherboard manual for specific CPU socket and component locations.
સામાન્ય તૈયારી
- બધા ઘટકોને અનપેક કરો અને પેકેજની સામગ્રીની સૂચિ સામે ચકાસો.
- Remove any existing CPU cooler and clean the CPU surface thoroughly with isopropyl alcohol to remove old thermal paste.
Intel Installation (LGA115X/1200/1700)
- બેકપ્લેટ ઇન્સ્ટોલ કરો: Place the universal backplate (LGA115X/1200/17XX) on the rear side of the motherboard, aligning the holes with the CPU socket mounting holes.
- સુરક્ષિત અવરોધો: From the front side of the motherboard, insert the appropriate Intel mounting screws (Black Gel Columns for Intel, Blue Gel Columns for LGA1700) through the mounting holes and into the backplate. Tighten them finger-tight.
- માઉન્ટિંગ કૌંસ જોડો: Place the two Intel mounting brackets onto the standoffs, ensuring they are oriented correctly. Secure them with the provided nuts.
- થર્મલ પેસ્ટ લાગુ કરો: Apply a small, pea-sized amount of the included TF4 thermal paste to the center of the CPU's integrated heat spreader (IHS). Do not spread it manually.
- Mount Heatsink: Carefully place the heatsink onto the CPU, aligning the mounting holes on the heatsink base with the screws on the mounting brackets. Tighten the screws in an alternating diagonal pattern until secure. Do not overtighten.
- Attach Fan: Use the fan buckles to attach the TL-C12C-S fan to the heatsink. Ensure the fan is oriented to blow air through the heatsink towards the rear of the case.
- કેબલ્સ કનેક્ટ કરો: Connect the 4-pin PWM fan cable to the CPU_FAN header on your motherboard. Connect the 5V 3-pin ARGB cable to an available 5V ARGB header on your motherboard.
AMD Installation (AM4/AM5)
- મધરબોર્ડ તૈયાર કરો: Remove the plastic retention clips from the stock AMD backplate, but keep the stock backplate in place.
- સુરક્ષિત અવરોધો: Insert the appropriate AMD mounting screws (Red Gel Columns for AMD) into the stock backplate's mounting holes. Tighten them finger-tight.
- માઉન્ટિંગ કૌંસ જોડો: Place the two AMD mounting brackets onto the standoffs, ensuring they are oriented correctly. Secure them with the provided nuts.
- થર્મલ પેસ્ટ લાગુ કરો: Apply a small, pea-sized amount of the included TF4 thermal paste to the center of the CPU's integrated heat spreader (IHS). Do not spread it manually.
- Mount Heatsink: Carefully place the heatsink onto the CPU, aligning the mounting holes on the heatsink base with the screws on the mounting brackets. Tighten the screws in an alternating diagonal pattern until secure. Do not overtighten.
- Attach Fan: Use the fan buckles to attach the TL-C12C-S fan to the heatsink. Ensure the fan is oriented to blow air through the heatsink towards the rear of the case.
- કેબલ્સ કનેક્ટ કરો: Connect the 4-pin PWM fan cable to the CPU_FAN header on your motherboard. Connect the 5V 3-pin ARGB cable to an available 5V ARGB header on your motherboard.
Illustration of CPU socket compatibility for AMD AM4/AM5 and Intel LGA1150/1151/1156/1200/1700, along with a detailed view of the heatsink's top cover and aluminum fins.
The CPU cooler installed on a motherboard, demonstrating its compatibility with RAM modules and the inclusion of TF4 thermal paste.
Close-up of the cooler installed on a motherboard, illustrating RAM clearance and the overall fit within a system.
ઓપરેટિંગ સૂચનાઓ
Fan Control (PWM)
The TL-C12C-S fan utilizes a 4-pin PWM connector, allowing your motherboard to dynamically control its speed based on CPU temperature. This ensures optimal cooling performance while minimizing noise levels. You can typically configure fan curves in your motherboard's BIOS/UEFI settings or through manufacturer-provided software.
ARGB લાઇટિંગ કંટ્રોલ
The fan features Addressable RGB (ARGB) lighting, which can be synchronized with other ARGB components in your system. Connect the 5V 3-pin ARGB cable to a compatible ARGB header on your motherboard. Lighting effects can then be controlled via your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync) or a dedicated ARGB controller (not included).
The TL-C12C-S PWM fan displaying its ARGB lighting capabilities, highlighting the various color modes.
જાળવણી
Regular maintenance ensures optimal performance and extends the lifespan of your CPU cooler.
- ધૂળ દૂર કરવી: Periodically (every 3-6 months, or more frequently in dusty environments) use compressed air to clean dust from the heatsink fins and fan blades. Ensure the fan is held stationary during cleaning to prevent over-spinning and potential damage.
- પંખાનું નિરીક્ષણ: Check the fan for any signs of wear, unusual noise, or obstructions. If the fan becomes excessively noisy or stops spinning, it may require replacement.
- થર્મલ પેસ્ટ: The thermal paste typically lasts for several years. If you notice a significant increase in CPU temperatures over time, consider reapplying fresh thermal paste. This involves carefully removing the cooler, cleaning both the CPU and cooler base, and applying new thermal paste.
મુશ્કેલીનિવારણ
If you encounter issues with your CPU cooler, refer to the following common problems and solutions:
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| ઉચ્ચ CPU તાપમાન | Insufficient thermal paste, poor heatsink contact, dust buildup, incorrect fan orientation. | Reapply thermal paste, ensure heatsink is securely mounted, clean dust from heatsink and fan, verify fan is blowing towards the rear of the case. |
| ફરતો નથી પંખો | Fan cable disconnected, faulty fan header, fan failure. | Check 4-pin PWM cable connection to CPU_FAN header, try a different fan header, replace fan if faulty. |
| Fan is Noisy | Dust buildup, fan bearing issue, fan hitting cables. | Clean fan blades, ensure no cables are obstructing fan, consider fan replacement if bearing noise persists. |
| ARGB લાઇટિંગ કામ કરી રહી નથી | ARGB cable disconnected, incorrect ARGB header (e.g., 12V RGB instead of 5V ARGB), software issue. | Check 5V 3-pin ARGB cable connection to motherboard, ensure connection to a 5V ARGB header, verify motherboard RGB software settings. |
વોરંટી અને આધાર
The Thermalright Assassin King 120 SE ARGB CPU Air Cooler comes with a manufacturer's warranty. Please refer to the included warranty card for specific terms, conditions, and duration of coverage. For technical support, product inquiries, or warranty claims, please visit the official Thermalright webસાઇટ પર જાઓ અથવા તેમના ગ્રાહક સેવા વિભાગનો સંપર્ક કરો. વોરંટી માન્યતા માટે ખરીદીનો પુરાવો રાખો.
