FLEXISPOT E6 Essential (ET365) Electric Standing Desk User Manual

1. પરિચય

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT E6 Essential (ET365) Electric Standing Desk. Please read this manual thoroughly before use to ensure safe and efficient operation.

2. સલામતી માહિતી

• Ensure the desk is loaded within the recommended maximum weight limit of 220 lbs (100 kg) to maintain stability and prevent damage.
• Adjust the desk height according to individual user heights to utilize the 3-stage lift system's full range and ensure optimal stability.
• કામ કરતી વખતે બાળકો અને પાલતુ પ્રાણીઓને ડેસ્કથી દૂર રાખો.
• પ્રવાહી સીધા કંટ્રોલ પેનલ પર અથવા ઇલેક્ટ્રિકલ ઘટકોની નજીક રાખવાનું ટાળો.
• Do not disassemble or modify the desk's electrical components. Contact customer support for service.
• Ensure all cables are properly managed to prevent tripping hazards and damage during height adjustments.

3. પેકેજ સામગ્રી

Your FLEXISPOT E6 Essential desk ships in two boxes. Please verify all components are present before beginning assembly.

સમાવાયેલ ઘટકો:

• Desktop (One-Piece Maple Top, 48"x30")
• Desk Frame (White)
• Dual Motor Lift System
• મેમરી પ્રીસેટ્સ સાથે નિયંત્રણ પેનલ
• Assembly Hardware (screws, wrenches, cable clips)
• પાવર એડેપ્ટર અને કેબલ્સ
• સૂચના માર્ગદર્શિકા

Image: All components of the FLEXISPOT E6 Essential desk laid out for assembly, including the desktop, frame parts, control panel, and tools.

4. સેટઅપ અને એસેમ્બલી

Assembly typically requires one person and takes approximately 1 hour. Follow the steps below for a smooth setup.

૨.૧ અનબોક્સિંગ અને તૈયારી

1. Carefully open both boxes and remove all components.
2. Place the desktop upside down on a soft, clean surface (e.g., carpet or a blanket) to prevent scratches.
3. Verify all parts against the package contents list.

૧.૨ ફ્રેમ એસેમ્બલી

1. Attach the lifting columns to the crossbeams using the provided screws and tools. Ensure screws are aligned with square holes and tightened securely.
2. Connect the feet to the bottom of the lifting columns.
3. Adjust the frame width to match your 48"x30" desktop.

Video: Official installation guide for the FLEXISPOT E6 Essential desk, detailing frame assembly and desktop attachment.

4.3 Desktop Attachment

1. Center the assembled frame onto the underside of the desktop.
2. Secure the frame to the desktop using the provided screws. Pre-drilled holes may be present; if not, carefully drill pilot holes.
3. Attach the control panel to the underside of the desktop, ensuring it is flush with the edge.

છબી: ક્લોઝ-અપ view of the intelligent keypad control panel with LED display and memory presets, located on the underside of the desktop.

4.4 કેબલ મેનેજમેન્ટ

1. Connect the dual motors, control panel, and power adapter according to the labels.
2. Utilize the built-in cable management tray and magnetic cover cloth to organize and conceal all wires.
3. Ensure cables have enough slack to accommodate full height adjustment without tension.

છબી: અંડરસાઇડ view of the FLEXISPOT E6 desk showing organized cables within the cable management system.

5. ઓપરેટિંગ સૂચનાઓ

5.1 ઊંચાઈ ગોઠવણ

• નો ઉપયોગ કરો ઉપર (▲) અને નીચે (▼) arrow buttons on the control panel to manually adjust the desk height. The LED display will show the current height.
• The desk features a 3-stage lift system, allowing height adjustments from 23.6" to 48.8".

૫.૨ મેમરી પ્રીસેટ્સ

• The control panel has four memory buttons (1, 2, 3, 4) to save your preferred sitting and standing heights.
• To save a height: Adjust the desk to your desired height, then press the 'એમ' button followed by one of the number buttons (1-4). The display will confirm the setting.
• To recall a saved height: Simply press the corresponding number button (1-4). The desk will automatically move to the saved position.

૫.૪ અથડામણ વિરોધી સિસ્ટમ

• The desk is equipped with an anti-collision system that detects obstacles during height adjustment. If an obstacle is detected, the desk will stop and reverse slightly to prevent damage.
• Collision sensitivity can typically be adjusted via the control panel settings (refer to the full manual for detailed instructions).

Image: Diagram illustrating the anti-collision system of the FLEXISPOT E6 desk, showing it stopping upon encountering an obstacle.

6. મુખ્ય લક્ષણો

• Spacious One-Piece Desktop: A 48"x30" whole-piece maple desktop provides ampબહુવિધ મોનિટર અને એસેસરીઝ માટે જગ્યા.
• 3-એસtage Dual Motor Lift System: Offers a wide height adjustment range from 23.6" to 48.8" with smooth and quiet operation (under 50 dB).
• ઉચ્ચ ભાર ક્ષમતા: Supports up to 220 lbs (100 kg), accommodating various office equipment.
• Programmable Control Panel: Features an LED display and four memory presets for quick height adjustments.
• મજબૂત બાંધકામ: Built with a strong steel structure for enhanced stability and durability.
• FSC-Certified Desktop: Tabletop made from responsibly sourced wood.

છબી: વિગતવાર view of the intelligent keypad, highlighting the LED display, memory presets, and up/down controls.

Image: Visual representation of the desk's 220 lbs maximum load capacity, showing two 110 lbs weights on the desktop.

7. જાળવણી

• બધા સ્ક્રૂ અને બોલ્ટ કડક છે તેની ખાતરી કરવા માટે નિયમિતપણે તપાસો.
• ડેસ્કટોપ સપાટીને સોફ્ટ, ડી વડે સાફ કરોamp કાપડ કઠોર રસાયણો ટાળો.
• Keep the electrical components dry and free from dust.
• વસ્ત્રો અથવા નુકસાનના કોઈપણ ચિહ્નો માટે સમયાંતરે કેબલનું નિરીક્ષણ કરો.

8. મુશ્કેલીનિવારણ

9. સ્પષ્ટીકરણો

10. વોરંટી અને સપોર્ટ

FLEXISPOT offers the following warranty for your E6 Essential Electric Standing Desk:

• ૫-વર્ષનું કવરેજ: Desk frame and motor.
• ૫-વર્ષનું કવરેજ: Control panel and electronics.

For any assistance, questions, or warranty claims, please contact FLEXISPOT customer support through their official webસાઇટ અથવા રિટેલર જ્યાંથી ઉત્પાદન ખરીદવામાં આવ્યું હતું.