Tektronix MSO22 2-BW-100 Mixed Signal Oscilloscope

પરિચય

This manual provides essential information for the safe and efficient operation of your Tektronix MSO22 2-BW-100 Mixed Signal Oscilloscope. This instrument is designed for precise measurement and analysis of electronic signals, featuring a 100 MHz bandwidth and 2 analog channels.

મુખ્ય લાક્ષણિકતાઓમાં શામેલ છે:

• Analog input channels: 2 inputs
• બેન્ડવિડ્થ: 100 મેગાહર્ટઝ
• Sample rate: 2.5 GS/s Half channels; 1.25 GS/s All channels
• Record length: 10 Mpoints per channel
• Vertical resolution: 8 bits ADC; Up to 16 bits in high-resolution mode

સેટઅપ અને જોડાણો

Before operating the oscilloscope, ensure it is placed on a stable, level surface with adequate ventilation. Connect the power cord to the instrument and a grounded AC outlet.

Figure 1: Front panel of the Tektronix MSO22 2-BW-100 Oscilloscope, showing the display, control knobs, buttons, and input connectors (Inputs 1, 2, Aux In, AFG/Aux Out).

ઇનપુટ જોડાણો

• Analog Inputs (1, 2): Connect your probes to these BNC connectors for signal acquisition.
• ઓક્સ ઇન: Auxiliary input for external trigger or other signals.
• AFG/Aux Out: Output for the Arbitrary Function Generator or auxiliary signals.

પાવર ચાલુ

Press the power button located on the front panel to turn on the instrument. Allow a few moments for the system to boot up.

ઓપરેટિંગ સૂચનાઓ

This section outlines the basic steps for operating the oscilloscope to capture and analyze waveforms.

Basic Waveform Capture

1. Connect Probe: Attach a compensated probe to one of the analog input channels (e.g., Input 1).
2. સર્કિટ સાથે જોડાઓ: Connect the probe tip to the test point in your circuit and the ground clip to the circuit's ground.
3. Auto-Set: દબાવો Auto-Set button (if available, common on oscilloscopes) to automatically adjust vertical and horizontal settings for a stable display.
4. Adjust Vertical Scale: નો ઉપયોગ કરો વર્ટિકલ સ્કેલ knob to adjust the volts per division, controlling the amplitude of the waveform on the screen.
5. Adjust Horizontal Scale: નો ઉપયોગ કરો આડું સ્કેલ knob to adjust the seconds per division, controlling the time base of the waveform.
6. Adjust Trigger: નો ઉપયોગ કરો ટ્રિગર લેવલ knob to set the voltage level at which the oscilloscope captures the waveform, ensuring a stable display.

માપન કાર્યો

The MSO22 2-BW-100 offers various automated measurement functions. Access these through the on-screen menu system. Common measurements include Peak-to-Peak Voltage, Frequency, Period, and Rise/Fall Time.

જાળવણી

યોગ્ય જાળવણી તમારા ઓસિલોસ્કોપની ટકાઉપણું અને ચોકસાઈ સુનિશ્ચિત કરે છે.

સફાઈ

• સોફ્ટ સાથે બાહ્ય સપાટીઓ સાફ કરો, ડીamp કાપડ ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટનો ઉપયોગ કરશો નહીં.
• ખાતરી કરો કે કોઈ પ્રવાહી સાધનમાં પ્રવેશતું નથી.
• Clean the display screen with a soft, lint-free cloth specifically designed for electronic displays.

માપાંકન

For optimal performance, periodic calibration by qualified service personnel is recommended. Refer to the official Tektronix service manual for calibration procedures and intervals.

મુશ્કેલીનિવારણ

આ વિભાગ તમને આવી શકે તેવી સામાન્ય સમસ્યાઓના ઉકેલો પૂરા પાડે છે.

• કોઈ ડિસ્પ્લે નથી:
  • Ensure the power cord is securely connected and the instrument is powered on.
  • Check the brightness and contrast settings of the display.
• અસ્થિર તરંગસ્વરૂપ:
  • Adjust the trigger level and trigger source settings.
  • Verify the probe compensation is correct.
  • Check for proper grounding of the probe and the circuit under test.
• No Signal Detected:
  • Ensure the probe is correctly connected to the input channel and the circuit.
  • Check the input coupling (AC/DC/GND) and vertical scale settings.
  • Verify the signal source is active.

If problems persist, contact Tektronix customer support.

વિશિષ્ટતાઓ

Detailed technical specifications for the Tektronix MSO22 2-BW-100 Mixed Signal Oscilloscope.

વોરંટી અને આધાર

Tektronix products are designed for reliability and performance. For information regarding product warranty, please refer to the warranty statement included with your purchase or visit the official Tektronix webસાઇટ

For technical support, service, or additional documentation, please contact Tektronix customer service or visit their official support portal. Ensure you have your product model number (MSO22 2-BW-100) and serial number ready when contacting support.

ઑનલાઇન સંસાધનો: www.tek.com