YESWELDER 205A MMA/Lift TIG Arc Welder Instruction Manual

1. પરિચય

This manual provides essential information for the safe and effective operation, setup, maintenance, and troubleshooting of your YESWELDER 205A MMA/Lift TIG Arc Welder. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.

છબી 1.1: આગળ view of the YESWELDER 205A MMA/Lift TIG Arc Welder, showcasinતેની કોમ્પેક્ટ ડિઝાઇન અને કંટ્રોલ પેનલ.

2. સલામતી માહિતી

Welding operations involve significant risks. Always prioritize safety to prevent electric shock, burns, fire, and other hazards. Adhere to all local and national safety regulations.

સામાન્ય સલામતી સાવચેતીઓ:

• Wear appropriate personal protective equipment (PPE), including a welding helmet with proper shade, flame-resistant clothing, welding gloves, and safety shoes.
• Ensure the welding area is well-ventilated to avoid inhaling fumes.
• જ્વલનશીલ સામગ્રીને વેલ્ડીંગ વિસ્તારથી દૂર રાખો.
• Always disconnect power before performing maintenance or adjustments.
• Do not operate the welder in damp અથવા ભીની સ્થિતિ.

સંકલિત સલામતી સુવિધાઓ:

The YESWELDER 205A is equipped with several safety mechanisms:

• સ્વચાલિત વોલ્યુમtage Fluctuation Compensation: Helps maintain stable welding performance despite input power variations.
• ઓવરકરન્ટ પ્રોટેક્શન: Automatically shuts down the machine if current exceeds safe limits.
• ઓવરલોડ પ્રોટેક્શન: Prevents damage from excessive load.
• તાપમાન નિયંત્રણ: Monitors internal temperature and initiates automatic shutdown if overheating occurs.
• IP21 Protection Standard: Provides protection against solid objects over 12mm and vertically falling water drops.
• Electrostatic Coating: Unique coating designed to prevent shock transfer.

છબી 2.1: ઓવરview of the YESWELDER 205A's built-in safety features.

3. ઉત્પાદન ઓવરview

The YESWELDER 205A is a versatile 2-in-1 welding machine offering both Stick (MMA) and Lift TIG welding capabilities. It features an advanced IGBT inverter technology for stable arc performance and a user-friendly interface.

મુખ્ય લક્ષણો:

• Dual Welding Modes: Supports Stick (MMA) and Lift TIG welding.
• ઉચ્ચ આઉટપુટ: 205 સુધી amperes, suitable for various welding tasks.
• અદ્યતન કાર્યો: Includes Hot Start, Arc Force, and Anti-Stick for improved arc ignition and stability.
• મોટી એલઇડી ડિસ્પ્લે: Provides clear visibility of current, electrode size, and welding mode.
• પોર્ટેબલ ડિઝાઇન: Weighs approximately 3.8 kg (8.4 lbs) for easy transport.
• ટકાઉ બાંધકામ: Features an additional plastic casing for enhanced protection.

Image 3.1: The YESWELDER 205A supports both Stick (MMA) and Lift TIG welding modes.

નિયંત્રણ પેનલ પરિચય:

Familiarize yourself with the control panel components for efficient operation.

છબી 3.2: વિગતવાર view of the control panel, indicating the digital display, value knob, VRD button, parameter button, and welding mode button.

1. ડિજિટલ ડિસ્પ્લે: Shows welding parameters such as current, electrode size, and selected mode.
2. Value Knob: Adjusts welding current and other parameters.
3. VRD Button: Activates or deactivates Voltage Reduction Device for enhanced safety in certain environments.
4. Parameter Button: Cycles through adjustable parameters (e.g., Hot Start, Arc Force).
5. Welding Mode Button: Selects between Stick (MMA) and Lift TIG welding modes.

Image 3.3: The upgraded large LED display provides clear and comprehensive information during operation.

4. સેટઅપ

Proper setup is crucial for safe and effective welding. Follow these steps carefully.

4.1 અનપેકિંગ અને નિરીક્ષણ:

• Remove the welder and all accessories from the packaging.
• Inspect for any shipping damage. Contact your supplier immediately if damage is found.
• ખાતરી કરો કે પેકિંગ સૂચિમાં સૂચિબદ્ધ બધા ઘટકો હાજર છે.

4.2 Connecting Accessories:

Image 4.1: Electrode holder and ground clamp જોડાણો

1. ગ્રાઉન્ડ Clamp કનેક્શન: જમીન cl સાથે જોડોamp cable to the negative (-) output terminal on the welder. Securely attach the ground clamp વર્કપીસ અથવા વેલ્ડીંગ ટેબલ પર, સારા વિદ્યુત સંપર્કની ખાતરી કરે છે.
2. Electrode Holder Connection (for MMA/Stick): Connect the electrode holder cable to the positive (+) output terminal on the welder. Insert the welding electrode into the holder.
3. TIG Torch Connection (for Lift TIG - torch sold separately): If performing Lift TIG welding, connect the TIG torch cable to the negative (-) output terminal. Connect the gas hose from the TIG torch to your argon gas regulator.

4.3 પાવર કનેક્શન:

• Ensure the welder's power switch is in the OFF position.
• Connect the power input cable to a suitable 230V power outlet. Verify that the power source meets the welder's requirements.

5. ઓપરેટિંગ સૂચનાઓ

The YESWELDER 205A offers two primary welding modes: Stick (MMA) and Lift TIG.

5.1 Starting the Welder:

• After connecting all cables and ensuring safety, turn the power switch to the ON position.
• The LED display will illuminate, showing the default welding mode and current.

5.2 Stick (MMA) Welding:

Image 5.1: Visual representation of Stick welding (left) and Lift TIG welding (right).

1. મોડ પસંદ કરો: Press the 'Welding Mode Button' until 'Stick' (MMA) is indicated on the display.
2. Set Current: Use the 'Value Knob' to adjust the welding current (amperes) according to the electrode type and material thickness. The machine supports up to 205A.
3. Adjust Parameters (Optional): Press the 'Parameter Button' to cycle through Hot Start and Arc Force settings. Adjust these using the 'Value Knob' as needed for optimal arc ignition and stability.
4. Begin Welding: Strike the arc by lightly touching the electrode to the workpiece and quickly lifting it slightly. Maintain a consistent arc length and travel speed.

5.3 Lift TIG Welding:

For Lift TIG welding, a TIG torch with a gas valve is required (not included).

1. મોડ પસંદ કરો: Press the 'Welding Mode Button' until 'Lift TIG' is indicated on the display.
2. Set Current: Use the 'Value Knob' to adjust the welding current (amperes) based on the material and tungsten electrode size.
3. ગેસ પ્રવાહ: Open the gas valve on the TIG torch to establish argon gas flow.
4. આર્ક શરૂ કરો: Gently touch the tungsten electrode to the workpiece and then lift it slightly (1-2mm) to initiate the arc. The arc will start at a low current and ramp up to the set current.
5. Perform Weld: ટૂંકી ચાપ લંબાઈ રાખો અને જો જરૂરી હોય તો ફિલર સળિયાને મેન્યુઅલી ફીડ કરો.

6. જાળવણી

Regular maintenance ensures the longevity and optimal performance of your welder.

6.1 દૈનિક જાળવણી:

• Clean the exterior of the machine with a dry, soft cloth.
• Inspect all cables and connections for damage or loose fittings.
• Check the electrode holder and ground clamp વસ્ત્રો માટે.

6.2 Periodic Maintenance (Monthly/Quarterly):

• આંતરિક સફાઈ: Disconnect power. Open the machine casing and use compressed air to blow out dust and debris from the cooling fins and internal components. Ensure no moisture enters.
• પંખાની તપાસ: Verify that the cooling fan operates freely and is not obstructed.
• Terminal Inspection: Check all power terminals for corrosion or looseness. Tighten if necessary.

Caution: Only qualified personnel should perform internal maintenance. Always disconnect power before opening the machine.

7. મુશ્કેલીનિવારણ

સામાન્ય સમસ્યાઓ અને તેમના સંભવિત ઉકેલો માટે નીચે આપેલ કોષ્ટકનો સંદર્ભ લો.

8. સ્પષ્ટીકરણો

Technical specifications for the YESWELDER ARC-205D-EU model.

Image 8.1: Detailed technical specifications for the ARC-205D model.

9. વોરંટી અને સપોર્ટ

For warranty information, technical support, or service inquiries, please contact YESWELDER customer service. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official YESWELDER webસાઇટ પર જાઓ અથવા તેમના અધિકૃત સેવા કેન્દ્રોનો સંપર્ક કરો.