1. પરિચય
The VDIAGTOOL V200 Automotive Circuit Tester is a versatile diagnostic tool designed for electrical system testing in 12V-24V vehicles. It combines multiple functions to assist in identifying and troubleshooting electrical faults efficiently.
Figure 1: VDIAGTOOL V200 Automotive Circuit Tester and included accessories.
2. બોક્સમાં શું છે
- સર્કિટ પ્રોબ ટેસ્ટર
- Extension Cable (20 ft)
- સિગારેટ લાઇટર એડેપ્ટર
- વપરાશકર્તા માર્ગદર્શિકા
Figure 2: All components included in the VDIAGTOOL V200 kit.
3. સેટઅપ
The V200 is powered by the vehicle's 12V-24V battery. Connect the red alligator clip to the positive (+) terminal and the black alligator clip to the negative (-) terminal of the vehicle battery. Alternatively, use the provided cigarette lighter adapter for power.
3.1 ઉપકરણને પાવરિંગ
- બેટરી કનેક્શન: લાલ cl જોડોamp પોઝિટિવ બેટરી ટર્મિનલ અને બ્લેક CLamp નકારાત્મક બેટરી ટર્મિનલ પર.
- Cigarette Lighter Connection: Insert the cigarette lighter adapter into the vehicle's 12V accessory socket.
Video 1: Demonstrates the unboxing and initial setup of the VDIAGTOOL V200, including connecting to a car battery.
4. ઓપરેટિંગ મોડ્સ
The V200 supports four primary working modes, easily switchable with a single button press.
- ડીસી વોલ્યુમtage ટેસ્ટ: Detects the DC voltage value of the circuit under test with 0.1V resolution.
- એસી વોલ્યુમtage ટેસ્ટ: Detects Max/Min voltage, frequency, and duty cycle of the AC circuit.
- પ્રતિકાર પરીક્ષણ: Measures resistance between the probe tip and the auxiliary ground lead.
- ડાયોડ ટેસ્ટ: Determines the operation and conductivity of diode assemblies.
Figure 3: The V200 display interface illustrating the four main working modes.
5. મુખ્ય કાર્યો
5.1 Polarity Identification
The V200 automatically identifies circuit polarity. A red LED indicates a positive connection, while a green LED indicates a negative connection. No LED indicates an open circuit.
Figure 4: Visual representation of polarity identification using the V200's LED indicators.
5.2 Component Activation
This feature allows you to activate components (e.g., lights, motors, relays) by supplying power or ground directly from the probe, aiding in troubleshooting. Use caution to avoid damaging components by applying incorrect polarity or excessive current.
Figure 5: Illustration of component activation for testing a car bulb.
5.3 Continuity, Sensor/Signal Circuit Test
Perform continuity tests, check sensor states, and verify signal integrity within circuits. The tool can also help locate short circuits and bad grounds.
6. સલામતી સુવિધાઓ
6.1 ઓવરલોડ પ્રોટેક્શન
The V200 features a built-in 8-amp circuit breaker. In case of an overload, the device will automatically shut down to protect itself and the tested components. A beep warning will also occur.
Figure 6: Visual indicator of the overload protection feature.
7. સ્પષ્ટીકરણો
- ઉત્પાદન પરિમાણો: 1.85 x 1.1 x 7 ઇંચ
- વસ્તુનું વજન: ૧.૨ કિલોગ્રામ (૨.૬૫ પાઉન્ડ)
- પાવર સ્ત્રોત: Corded Electric (12V-24V vehicle battery or cigarette lighter)
- મોડલ નંબર: VDT-V200-P
- દોરીની લંબાઈ: 20FT main cord + 20FT extension cord (Total 40FT)
- વધારાના લક્ષણો: Built-in flashlight, Tone On/Off Design
8. જાળવણી
To ensure the longevity and optimal performance of your VDIAGTOOL V200, follow these general maintenance guidelines:
- Keep the device clean and free from dust, dirt, and moisture.
- Store the tester and its accessories in the provided sturdy case when not in use.
- Inspect cables and connectors regularly for any signs of wear or damage. Replace if necessary.
- લાંબા સમય સુધી ઉપકરણને અતિશય તાપમાન અથવા સીધા સૂર્યપ્રકાશમાં આવવાનું ટાળો.
9. મુશ્કેલીનિવારણ
If you encounter issues with your VDIAGTOOL V200, consider the following:
- ઉપકરણ ચાલુ નથી: Ensure secure connections to the vehicle's battery or cigarette lighter. Verify the vehicle's power source is active.
- No Reading/Incorrect Reading: Check that the probe tip is making good contact with the circuit. Ensure the correct operating mode is selected.
- ઓવરલોડ સુરક્ષા ટ્રિગર થઈ: If the device shuts down with a beep, it indicates an overload. Disconnect the probe, allow a few moments, and then reconnect. Reduce the load or verify the circuit's specifications before retesting.
- સ્ક્રીન સમસ્યાઓ: If the screen is blank or unresponsive, try disconnecting and reconnecting the power source.
10. વોરંટી અને સપોર્ટ
VDIAGTOOL offers comprehensive support for the V200 Automotive Circuit Tester:
- વોરંટી: 3 Years Warranty.
- તકનીકી સહાય: Lifetime technical assistance.
- વળતર: 60 Days No-Reason-asked Return for refund.
- પ્રોબ રિપ્લેસમેન્ટ: Free probe replacement.
- સપોર્ટનો સંપર્ક કરો: For any questions or assistance, kindly reach us via vdiagtool2@outlook.com પર જાઓ.
