1. પરિચય
This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your Tork Matic H1 Elevation Automatic Paper Hand Towel Dispenser, Model 551100. Please read this manual thoroughly before using the product to ensure proper function and longevity. This dispenser is designed for efficient and hygienic hand drying in various commercial and industrial environments.
2. સલામતી માહિતી
- Ensure the dispenser is installed on a stable and appropriate wall surface.
- Use only the specified Tork H1 hand towel rolls for optimal performance.
- બેટરીઓને બાળકોની પહોંચથી દૂર રાખો. વપરાયેલી બેટરીઓનો જવાબદારીપૂર્વક નિકાલ કરો.
- Do not attempt to modify or repair the dispenser yourself. Contact qualified service personnel for assistance.
- Clean the dispenser regularly with a soft, damp કાપડ. ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટ્સ ટાળો.
3. ઉત્પાદન ઓવરview
The Tork Matic H1 Elevation Automatic Paper Hand Towel Dispenser is a high-capacity, touch-free solution for hand hygiene. Its modern design and sensor-based dispensing system ensure a hygienic and economical experience.
આકૃતિ 3.1: ફ્રન્ટ view of the Tork Matic H1 Elevation Automatic Paper Hand Towel Dispenser.
મુખ્ય લક્ષણો:
- Touch-Free Dispensing: Sensor-activated for enhanced hygiene.
- Sheet-by-Sheet Distribution: Reduces consumption and waste.
- એડજસ્ટેબલ ટુવાલ લંબાઈ: Customizable sheet length (25, 30, 35, or 45 cm) for user preference and economy.
- ઉચ્ચ ક્ષમતા: Designed for high-traffic washrooms, minimizing refill frequency.
- LED Refill Indicator: Provides a visual cue when a refill is needed.
- Lockable Top Opening: Secures the paper roll and batteries.
- ટકાઉ બાંધકામ: Made from white plastic for longevity and easy cleaning.
- એવોર્ડ વિજેતા ડિઝાઇન: Recognized with the iF Product Design Award and Red Dot Award 2009.
4. સેટઅપ અને ઇન્સ્ટોલેશન
4.1 વોલ માઉન્ટિંગ
The dispenser is designed for easy wall mounting. Select a suitable location, ensuring adequate space for operation and maintenance. Use appropriate fasteners for your wall type.
- Open the dispenser cover using the provided key.
- Position the dispenser on the wall at the desired height. The backplate features an integrated level for precise alignment.
- Mark the drilling points through the designated holes on the backplate.
- જો જરૂરી હોય તો છિદ્રો ડ્રિલ કરો અને દિવાલ પ્લગ દાખલ કરો.
- Secure the dispenser to the wall using screws.
4.2 બેટરી ઇન્સ્ટોલેશન
The dispenser operates on three C alkaline batteries.
- ડિસ્પેન્સર કવર ખોલો.
- બેટરી કમ્પાર્ટમેન્ટ શોધો.
- Insert three C alkaline batteries, ensuring correct polarity (+/-).
- બેટરીના ડબ્બાને સુરક્ષિત રીતે બંધ કરો.
Figure 4.1: Internal features including installation level, LED refill indicator, and towel length adjustment points.
5. ઓપરેશન
5.1 Loading Paper Towel Rolls
Use only Tork H1 system hand towel rolls.
- ડિસ્પેન્સર કવર ખોલો.
- Place the new Tork H1 paper roll onto the roll holders.
- Feed the leading edge of the paper into the dispensing mechanism until it is visible at the bottom opening.
- ડિસ્પેન્સર કવરને સુરક્ષિત રીતે બંધ કરો.
5.2 Dispensing Paper Towels
The dispenser uses an infrared sensor for touch-free operation.
- Place your hand in front of the sensor located at the bottom of the dispenser.
- A single sheet of paper towel will be dispensed automatically.
- Tear off the dispensed sheet.
Figure 5.1: User interacting with the dispenser for touch-free towel retrieval.
Figure 5.2: Visual representation of sheet-by-sheet dispensing, which helps reduce overall consumption.
5.3 Adjusting Towel Length
The towel length can be adjusted to 25, 30, 35, or 45 cm to optimize usage and reduce waste. Refer to Figure 4.1 for the location of the adjustment mechanism, typically found inside the dispenser.
6. જાળવણી
૫.૨ રિફિલિંગ
The LED refill indicator and the viewing window on the dispenser will signal when the paper roll is low and requires replacement. Follow the steps in Section 5.1 to load a new roll.
આકૃતિ 6.1: ઉદાamples of compatible Tork H1 paper towel refills.
6.2 સફાઈ
Regular cleaning helps maintain hygiene and the appearance of the dispenser.
- સોફ્ટ સાથે બાહ્ય સપાટીઓ સાફ કરો, ડીamp કાપડ અને હળવું, ઘર્ષણ ન કરતું સફાઈ દ્રાવણ.
- Avoid spraying cleaning agents directly onto the dispenser, especially near the sensor or battery compartment.
- Ensure the dispenser is dry before closing the cover.
7. મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| No paper dispensed | Empty roll; low batteries; sensor obstructed; paper jammed. | Replace roll; replace batteries; clear sensor area; clear paper jam. |
| Paper dispenses incorrectly | Incorrect paper loading; wrong paper type. | Re-load paper correctly; ensure Tork H1 rolls are used. |
| એલઇડી સૂચક ફ્લેશિંગ | Low battery or low paper roll. | Check and replace batteries or paper roll as needed. |
8. સ્પષ્ટીકરણો
- મોડલ નંબર: 551100
- પરિમાણો (H x W x D): 368 mm x 331 mm x 206 mm (14.49 in x 13.03 in x 8.11 in)
- વજન: 3.59 કિગ્રા (7.91 lbs)
- સામગ્રી: પ્લાસ્ટિક
- રંગ: સફેદ
- માઉન્ટ કરવાનો પ્રકાર: દિવાલ-માઉન્ટેડ
- પાવર સ્ત્રોત: 3 x C Alkaline Batteries
- સુસંગત સિસ્ટમ: Tork H1 Hand Towel Rolls
9. વોરંટી અને સપોર્ટ
For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official Tork webસાઇટ. કોઈપણ વોરંટી દાવા માટે તમારી ખરીદીનો પુરાવો રાખો.
