Strex Bluetooth 2-in-1 Transmitter and Receiver (BT 5.0, 3.5MM AUX/RCA) User Manual

પરિચય

This manual provides detailed instructions for the Strex Bluetooth 2-in-1 Transmitter and Receiver, Model SP173. This versatile device allows you to wirelessly transmit or receive audio signals, enhancing your audio experience with various devices.

The Strex Bluetooth adapter supports both ટ્રાન્સમીટર (TX) અને રીસીવર (RX) modes, utilizing Bluetooth 5.0 technology for stable, high-quality audio transmission.

પેકેજ સામગ્રી

• Strex Bluetooth 2-in-1 Audio Transmitter/Receiver
• માઇક્રો યુએસબી પાવર કેબલ
• 3.5mm AUX ઓડિયો કેબલ
• આરસીએ કેબલથી 3.5 મીમી
• વપરાશકર્તા માર્ગદર્શિકા (આ દસ્તાવેજ)

ઉપકરણ ઓવરview

Familiarize yourself with the various components and ports of your Strex Bluetooth adapter.

• ચાલુ/બંધ સ્વિચ: ઉપકરણને ચાલુ અથવા બંધ કરે છે.
• Mode Switch (RX/TX): Selects between Receiver (RX) and Transmitter (TX) modes.
• સ્થિતિ એલઇડી: Indicates power, pairing, and connection status.
• માઇક્રો યુએસબી ચાર્જિંગ પોર્ટ: આંતરિક બેટરી ચાર્જ કરવા માટે.
• 3.5mm Audio Input/Output: Connects to audio sources or output devices using the provided cables.

સેટઅપ અને ઓપરેશન

ઉપકરણ ચાર્જ કરી રહ્યું છે

Before first use, ensure the device is fully charged. Connect the Micro USB power cable to the charging port on the adapter and the other end to a USB power source (e.g., computer USB port, USB wall adapter).

• સંપૂર્ણ ચાર્જ લગભગ લે છે 90 મિનિટ.
• The device provides up to 6-8 કલાક of continuous playtime on a single charge.

રીસીવર (RX) મોડ

In RX mode, the Strex adapter receives audio wirelessly from a Bluetooth-enabled device (e.g., smartphone, tablet) and outputs it to a non-Bluetooth audio system (e.g., wired speakers, car stereo).

1. Switch the device to આરએક્સ મોડ using the mode selector switch.
2. Connect the Strex adapter to your non-Bluetooth audio system using either the Mm.mm મીમી એયુએક્સ કેબલ અથવા 3.5 મીમી થી આરસીએ કેબલ.
3. Power on the Strex adapter. The Status LED will indicate pairing mode (typically blinking blue).
4. On your Bluetooth-enabled device (e.g., smartphone), go to Bluetooth settings and search for available devices. Select "Strex" (or similar name) to pair.
5. Once paired, the Status LED will show a solid blue light. You can now stream audio from your device to your audio system.

ટ્રાન્સમીટર (TX) મોડ

In TX mode, the Strex adapter transmits audio wirelessly from a non-Bluetooth audio source (e.g., TV, PC, old stereo system) to a Bluetooth-enabled receiving device (e.g., Bluetooth headphones, Bluetooth speakers).

1. Switch the device to TX મોડ using the mode selector switch.
2. Connect the Strex adapter to your non-Bluetooth audio source (e.g., TV's audio output) using either the Mm.mm મીમી એયુએક્સ કેબલ અથવા 3.5 મીમી થી આરસીએ કેબલ.
3. Power on the Strex adapter. The Status LED will indicate pairing mode.
4. તમારા બ્લૂટૂથ હેડફોન અથવા સ્પીકર્સને પેરિંગ મોડમાં મૂકો.
5. The Strex adapter will automatically search for and connect to nearby Bluetooth receiving devices. Once connected, the Status LED will show a solid light.
6. Ensure your Bluetooth headphones/speakers are unpaired from any other devices (e.g., smartphone) before attempting to pair with the Strex adapter in TX mode.

Important Notes on Operation:

• The adapter cannot simultaneously send and receive audio. It must be set to either TX or RX mode.
• For optimal performance, ensure the adapter is within 10 meters (33 feet) of the connected Bluetooth device.
• Bluetooth 5.0 provides HD Audio with minimal latency, but some older Bluetooth devices may experience slight synchronization differences.

જાળવણી

• સફાઈ: ઉપકરણને સાફ કરવા માટે નરમ, સૂકા કપડાનો ઉપયોગ કરો. પ્રવાહી ક્લીનર્સ અથવા એરોસોલ્સનો ઉપયોગ કરશો નહીં.
• સંગ્રહ: ઉપકરણને સીધા સૂર્યપ્રકાશ અને અતિશય તાપમાનથી દૂર ઠંડી, સૂકી જગ્યાએ સંગ્રહિત કરો.
• બેટરી સંભાળ: બેટરીનું આયુષ્ય વધારવા માટે, વારંવાર બેટરી સંપૂર્ણપણે ડિસ્ચાર્જ કરવાનું ટાળો. ઉપકરણને નિયમિતપણે ચાર્જ કરો, ભલે તે લાંબા સમય સુધી ઉપયોગમાં ન હોય.

મુશ્કેલીનિવારણ

• કોઈ શક્તિ નથી:

  Ensure the device is charged. Connect it to a power source using the Micro USB cable and allow it to charge for at least 15 minutes before attempting to power on.

• Cannot Pair in RX Mode:

  Make sure the adapter is in RX mode. Ensure your smartphone/tablet's Bluetooth is enabled and it is searching for new devices. If previously paired, try unpairing and re-pairing. Keep the devices within 10 meters.
• Cannot Pair in TX Mode:

  Verify the adapter is in TX mode. Ensure your Bluetooth headphones/speakers are in pairing mode and are not connected to any other device. Some devices may require you to manually initiate pairing on the adapter (refer to Status LED indications).

• No Audio Output/Input:

  Check all cable connections (3.5mm AUX or RCA) are secure. Ensure the volume on both the adapter and the connected audio device is turned up. Confirm the correct input/output source is selected on your audio system/TV.

• Audio Lag/Poor Quality:

  Ensure devices are within range and there are no significant obstructions. Reduce interference from other wireless devices. While Bluetooth 5.0 minimizes lag, some older audio sources or receiving devices might introduce slight delays.

વિશિષ્ટતાઓ

સલામતી માહિતી

• Do not dispose of batteries in fire. Batteries may explode.
• ઉપકરણને પાણી અને વધુ પડતા ભેજથી દૂર રાખો.
• જ્વલનશીલ સામગ્રીની નજીક ઉપકરણને ચાર્જ કરશો નહીં.
• The device has an operating range of 10 meters and may interfere with other wireless devices within this range.
• Always adhere to local regulations for the disposal of electronic waste.

વોરંટી અને આધાર

Specific warranty details are not provided in this manual. For warranty information or technical support, please refer to the product packaging or contact Strex customer service through their official webસાઇટ અથવા રિટેલર જ્યાંથી ઉત્પાદન ખરીદવામાં આવ્યું હતું.