Titan 62813 1/2-Inch Drive x 13mm 12-Point Metric Socket User Manual

પરિચય

This manual provides essential instructions for the proper use, maintenance, and care of your Titan 62813 1/2-Inch Drive x 13mm 12-Point Metric Socket. Please read this manual thoroughly before using the product to ensure safe and effective operation.

ઉત્પાદન ઓવરview

The Titan 62813 is a 1/2-inch drive, 13mm, 12-point metric socket designed for various fastening applications. It features chrome vanadium construction for durability and a mirror polish finish. The socket includes a knurled ring around its base for enhanced grip and stamped sizes for easy identification.

Figure 1: Titan 62813 1/2-Inch Drive x 13mm 12-Point Metric Socket. This image shows a close-up view of the chrome-finished socket, highlighting its 12-point interior and the textured knurled ring at the base designed for improved handling.

સેટઅપ

The Titan 62813 socket requires minimal setup. Follow these steps to prepare for use:

1. યોગ્ય ડ્રાઇવ ટૂલ પસંદ કરો: Ensure you are using a 1/2-inch drive ratchet, breaker bar, or extension that matches the socket's drive size.
2. સોકેટ જોડો: Align the square drive opening of the socket with the drive tang of your chosen tool. Push the socket firmly onto the tool until it clicks into place, indicating a secure connection.
3. ફિટ ચકાસો: Gently pull on the socket to confirm it is securely attached to the drive tool before applying torque.

ઓપરેટિંગ સૂચનાઓ

Using the Titan 62813 socket effectively involves proper selection and application:

1. ફાસ્ટનરનું કદ ઓળખો: Confirm the fastener (nut or bolt head) requires a 13mm metric socket. The socket's size is stamped for easy identification.
2. સોકેટ મૂકો: Place the 12-point end of the socket squarely over the fastener. Ensure the socket is fully seated on the fastener to prevent rounding.
3. ટોર્ક લાગુ કરો: Using your 1/2-inch drive tool, apply steady and controlled force to loosen or tighten the fastener. Avoid sudden jerking motions.
4. Remove the Socket: Once the task is complete, remove the socket from the fastener, then detach it from the drive tool.

સલામતી નોંધ: Always wear appropriate personal protective equipment, such as safety glasses, when using hand tools. Do not use damaged sockets or drive tools.

જાળવણી

Proper maintenance extends the life of your Titan socket:

• સફાઈ: After each use, wipe the socket clean with a dry cloth to remove dirt, grease, or debris. For stubborn grime, a mild solvent or degreaser can be used, followed by thorough drying.
• નિરીક્ષણ: Periodically inspect the socket for any signs of wear, cracks, or damage. Discontinue use if any damage is observed.
• સંગ્રહ: Store the socket in a dry environment, preferably in a tool tray or box, to prevent rust and corrosion.

મુશ્કેલીનિવારણ

તમને આવી શકે તેવી સામાન્ય સમસ્યાઓના ઉકેલો અહીં આપેલા છે:

• Socket slips on fastener:
  • Ensure the socket size matches the fastener exactly (13mm metric).
  • Verify the socket is fully seated on the fastener.
  • Inspect the fastener head for rounding or damage.
  • Inspect the socket's internal points for wear.
• Socket stuck on drive tool:
  • Apply a small amount of penetrating oil to the connection point.
  • Gently wiggle and pull the socket off the drive tool. Avoid excessive force.

વિશિષ્ટતાઓ

વોરંટી અને આધાર

The Titan 62813 1/2-Inch Drive x 13mm 12-Point Metric Socket comes with a મર્યાદિત આજીવન વોરંટી.

For warranty claims, technical assistance, or product support, please contact Titan customer service. Refer to the official Titan webસૌથી અદ્યતન સંપર્ક માહિતી માટે સાઇટ અથવા ઉત્પાદન પેકેજિંગ.

તમે પણ મુલાકાત લઈ શકો છો Titan Store on Amazon for more information about Titan products.