બ્લેકસ્ટાર AMPED3 100W મલ્ટી-ચેનલ ફ્લોરબોર્ડ ગિટાર Amp પેડલ યુઝર મેન્યુઅલ

પરિચય

This manual provides essential information for the safe and effective operation of your Blackstar AMPED3 100W મલ્ટી-ચેનલ ફ્લોરબોર્ડ ગિટાર Amp Pedal. Please read this manual thoroughly before use and retain it for future reference. The AMPED3 is a compact, powerful 100-watt pedal amplifier designed for guitarists seeking versatile tone shaping, user-programmable presets, and comprehensive connectivity options for live performance, studio recording, and practice.

સલામતી સૂચનાઓ

• પાવર સપ્લાય: Use only the specified power supply for this unit. Ensure the voltage matches your local power grid.
• વેન્ટિલેશન: વેન્ટિલેશનના છિદ્રોને અવરોધશો નહીં. ઓવરહિટીંગ અટકાવવા માટે યુનિટની આસપાસ પૂરતો હવા પ્રવાહ સુનિશ્ચિત કરો.
• ભેજ: Keep the unit away from water or excessive moisture. Do not operate in damp વાતાવરણ
• હેન્ડલિંગ: યુનિટને પડવાનું કે તેને મજબૂત અસર થવાનું ટાળો.
• સર્વિસિંગ: યુનિટની જાતે સર્વિસ કરવાનો પ્રયાસ કરશો નહીં. બધી સર્વિસિંગ લાયક કર્મચારીઓને સોંપો.
• સ્પીકર કનેક્શન્સ: Always ensure correct speaker impedance matching (8 or 16 Ohms) when connecting to external cabinets. Incorrect impedance can damage the ampજીવંત

ઉત્પાદન ઓવરview

બ્લેકસ્ટાર AMPED3 features a robust design with intuitive controls and extensive connectivity. Below is an overview of the front panel controls and rear panel connections.

આકૃતિ 1: ફ્રન્ટ પેનલ નિયંત્રણો. આ છબી ઉપરથી નીચે દર્શાવે છે view of the Blackstar AMPED3, highlighting the Gain, Volume, Boost, Reverb, Presence, Master knobs, Bass, Middle, Treble, ISF tone controls, Power Amp Response and Power wattage selectors, and footswitches for Clean, Crunch, Overdrive, Reverb, and Boost.

આકૃતિ 2: પાછળના પેનલ કનેક્શન્સ. This image shows the rear of the AMPED3, detailing the IN/OUT jacks, FX Loop (Send/Return), USB-C port, CabRig Outputs (Balanced XLR and Line Out/Phones), MIDI In/Thru, Speaker Outputs (8 Ohm, 16 Ohm), Hi Pot Output, and Mains Input.

ફ્રન્ટ પેનલ નિયંત્રણો

• લાભ: Adjusts the input gain for the selected channel.
• વોલ્યુમ: Controls the output volume of the selected channel.
• BOOST (PRE/POST): Activates the built-in boost. The switch determines if the boost is applied before (PRE) or after (POST) the preamp વિભાગ
• REVERB (DARK/LIGHT): Controls the reverb level. The switch selects between Dark and Light reverb voicings.
• હાજર: Adjusts the high-frequency response in the power amp વિભાગ
• માસ્ટર: Overall output volume control.
• બાસ, મિડલ, ટ્રેબલ: Standard 3-band EQ controls.
• ISF (Infinite Shape Feature): Blackstar's patented tone control, sweeping from a classic British tone to a modern American tone.
• પાવર AMP RESPONSE (EL84, EL34, 6L6): Selects the power amp valve emulation.
• POWER (1W, 20W, 100W): Selects the output wattage.
• CLEAN Footswitch: Activates the Clean channel.
• CRUNCH Footswitch: Activates the Crunch channel.
• OVERDRIVE Footswitch: Activates the Overdrive channel.
• REVERB ફૂટસ્વિચ: Toggles the reverb effect on/off.
• BOOST (HOLD: MANUAL) Footswitch: Toggles the boost effect on/off. Holding this footswitch may engage a manual mode for channel selection.

રીઅર પેનલ કનેક્શન્સ

• માં: ગિટાર ઇનપુટ.
• બહાર: Main output to other pedals or an ampજીવંત ઇનપુટ.
• FX LOOP (SEND/RETURN): For connecting external effects pedals.
• યુએસબી-સી: For connecting to a computer for recording and software control (Architect software).
• CABRIG OUTPUTS (BALANCED XLR / LINE OUT PHONES): Outputs with CabRig speaker simulation for direct connection to PA systems, audio interfaces, or headphones.
• MIDI IN/THRU: For MIDI control and integration with other MIDI devices.
• SPEAKER OUTPUTS (8 Ohm, 16 Ohm): For connecting to external guitar speaker cabinets. Use only one output at a time.
• HI POT OUTPUT: Auxiliary power output for pedals.
• મુખ્ય ઇનપુટ: પાવર કનેક્શન.

સેટઅપ

1. પાવર કનેક્શન: Connect the supplied power cable to the MAINS INPUT on the rear panel and then to a suitable power outlet.
2. ગિટાર કનેક્શન: Connect your guitar to the IN jack on the rear panel.
3. Output Connection (Choose one):
   • To a Speaker Cabinet: Connect a speaker cable from either the 8 Ohm or 16 Ohm SPEAKER OUTPUT to your guitar speaker cabinet. Ensure the impedance matches. Do not use both speaker outputs simultaneously.
   • To a PA System/Audio Interface: Use an XLR cable from the BALANCED XLR CABRIG OUTPUT to a PA mixer or audio interface.
   • To Headphones: Connect headphones to the LINE OUT PHONES CABRIG OUTPUT.
   • To another Amplifier/Pedal: Connect a standard instrument cable from the OUT jack to the input of another amplifier or pedal.
4. FX Loop (Optional): If using external effects, connect the SEND jack to the input of your effect pedal and the output of your effect pedal to the RETURN jack.
5. USB-C (Optional): For recording or using Blackstar's Architect software, connect a USB-C cable from the AMPED3 to your computer.
6. MIDI (Optional): Connect MIDI cables to the MIDI IN/THRU ports for external MIDI control.

ઓપરેટિંગ સૂચનાઓ

મૂળભૂત કામગીરી

1. પાવર ચાલુ: પાછળના પેનલ પરના પાવર સ્વીચને ચાલુ સ્થિતિમાં ફેરવો.
2. ચેનલ પસંદગી: Use the CLEAN, CRUNCH, and OVERDRIVE footswitches to select your desired channel. The corresponding LED will illuminate.
3. Adjusting Tone: Use the GAIN, VOLUME, BASS, MIDDLE, TREBLE, ISF, PRESENCE, and MASTER controls to shape your sound.
4. પાવર આઉટપુટ: ઇચ્છિત વોટ પસંદ કરોtage (1W, 20W, or 100W) using the POWER switch.
5. શક્તિ Amp પ્રતિભાવ: Choose between EL84, EL34, or 6L6 power amp valve emulations using the RESPONSE switch to alter the feel and breakup characteristics.

અદ્યતન સુવિધાઓ

• બુસ્ટ કાર્ય: Engage the BOOST footswitch to activate the clean boost. Use the PRE/POST switch to determine if the boost affects the preamp gain (PRE) or the overall volume after the preamp (POST).
• રિવર્બ: Activate the REVERB footswitch. Use the REVERB knob to adjust the effect level and the DARK/LIGHT switch to select the reverb character.
• CabRig Technology: આ AMPED3 features advanced CabRig DSP speaker simulation. This allows you to fine-tune your cabinet, microphone, and room simulations for direct outputs (XLR, Line Out/Phones, USB-C). Three CabRig presets can be stored and recalled.
• USB-C Audio Interface: કનેક્ટ કરો AMPED3 to your computer via USB-C to use it as an audio interface for recording. This also allows access to the Blackstar Architect software for deep editing of CabRig settings and other parameters.
• MIDI નિયંત્રણ: આ AMPED3 supports MIDI control over all its parameters. Refer to the Blackstar website or Architect software documentation for detailed MIDI implementation charts and setup instructions.

જાળવણી

• સફાઈ: નરમ, સૂકા કપડાથી યુનિટ સાફ કરો. ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટનો ઉપયોગ કરશો નહીં.
• સંગ્રહ: યુનિટને સીધા સૂર્યપ્રકાશ અને અતિશય તાપમાનથી દૂર સૂકી, ઠંડી જગ્યાએ સંગ્રહિત કરો.
• Footswitches and Knobs: Periodically check footswitches and knobs for smooth operation. Avoid excessive force.

મુશ્કેલીનિવારણ

વિશિષ્ટતાઓ

• મોડલ: AMPED3
• આઉટપુટ વોટtage: 100 Watts (selectable 1W, 20W, 100W)
• શક્તિ Amp પ્રતિભાવ: EL84, EL34, 6L6 Emulations
• ચેનલો: Clean, Crunch, Overdrive (Multi-Channel)
• અસરો: Footswitchable Reverb (Dark/Light), Built-in Clean Boost (Pre/Post)
• સ્પીકર આઉટપુટ: 8 Ohm, 16 Ohm (use one only)
• Direct Outputs: Balanced XLR CabRig Output, Line Out/Phones CabRig Output
• યુએસબી કનેક્ટિવિટી: USB-C for recording and Architect software
• MIDI: MIDI In, MIDI Thru
• FX લૂપ: મોકલો/પરત કરો
• સહાયક શક્તિ: Hi Pot Output (9V 500mA total)
• વસ્તુનું વજન: 5.64 પાઉન્ડ
• ઉત્પાદન પરિમાણો: 7 x 8.07 x 14.57 ઇંચ
• સામગ્રી: મેટલ, પ્લાસ્ટિક
• રંગ: કાળો

વોરંટી અને આધાર

Blackstar products are manufactured to high standards. For warranty information, please refer to the warranty card included with your product or visit the official Blackstar Ampલિફિકેશન website. For technical support, product registration, or to download the latest Architect software and drivers, please visit www.blackstaramps.com.