HANMATEK HM605T પ્રોગ્રામેબલ DC પાવર સપ્લાય યુઝર મેન્યુઅલ

1. સલામતી સૂચનાઓ

Please read all safety instructions carefully before operating the HANMATEK HM605T Programmable DC Power Supply. Failure to follow these instructions may result in electric shock, fire, or damage to the device.

• ગ્રાઉન્ડિંગ: Ensure the power supply is properly grounded to prevent electric shock.
• પાવર સ્ત્રોત: Connect the device only to the specified input voltage (110V).
• વેન્ટિલેશન: Do not block the ventilation openings. Ensure adequate airflow around the unit to prevent overheating. The automatic temperature control cooling fan activates when the operating temperature exceeds 45°C.
• પર્યાવરણ: Avoid operating the power supply in wet, damp, or dusty environments. Keep away from flammable materials.
• જોડાણો: Always ensure all connections are secure before turning on the output. Verify positive and negative poles.
• આંતરિક ઘટકો: સી ખોલશો નહીંasing or attempt to repair the unit yourself. Refer servicing to qualified personnel.
• સંરક્ષણ સુવિધાઓ: The device is equipped with Overvoltage Protection (OVP), Overcurrent Protection (OCP), Overpower Protection (OPP), Overheat Protection (OTP), and Short-Circuit Protection. Understand how these features operate.

2. ઉત્પાદન ઓવરview

The HANMATEK HM605T is a high-precision programmable DC power supply designed for various electronic applications. It features a 4-digit display for voltage, current, power, and time, along with advanced protection mechanisms and PC software control.

મુખ્ય લક્ષણો:

• પ્રોગ્રામેબલ આઉટપુટ: Supports Modbus programming instruction set and programmable sequence output via USB interface.
• High Accuracy Display: 4-digit display for output current, voltage, power, and time. Voltage resolution: 10mV; Current resolution: 1mA.
• વ્યાપક રક્ષણ: ઓવરવોલનો સમાવેશ થાય છેtage Protection (OVP), Overcurrent Protection (OCP), Overpower Protection (OPP), Overheat Protection (OTP), and Short-Circuit Protection.
• બહુવિધ કાર્યક્ષમતા: Features a front 5V 1.5A dual USB charging interface, one-key output ON/OFF switch, 6 groups of quick parameter storage (M1-M6), and automatic switching between voltage stabilization and current stabilization modes.
• વપરાશકર્તા મૈત્રીપૂર્ણ: One-key keyboard lock prevents accidental operation.

ઘટક ઓળખ:

Figure 2.1: Front and Rear Panel Layout. This image illustrates the various controls and ports on the front and back of the HM605T power supply, including the display, control buttons, output terminals, USB ports, cooling fan, and AC power input.

Figure 2.2: Multiple Protection Features. An internal view highlighting the robust circuitry designed for overvoltage, overcurrent, overpower, overtemperature, and short-circuit protection.

3. સેટઅપ

Follow these steps for initial setup of your HANMATEK HM605T power supply:

1. અનપેકીંગ: Carefully remove all components from the packaging. Verify that all items listed in the 'Packing' section (1 * Programmable DC power supply; 1 * CD; 1 * Power cord; 1 * Clip cord; 1 * USB cable; 1 * Manual) are present.
2. પાવર કનેક્શન: Connect the provided power cord to the AC power input on the rear panel of the power supply and then to a suitable 110V AC outlet.
3. પ્રારંભિક પાવર ચાલુ: Turn on the main power switch located on the rear panel. The display on the front panel should illuminate.
4. આઉટપુટ ટર્મિનલ્સ: Familiarize yourself with the output terminals (positive, negative, and ground) on the front panel. Ensure correct polarity when connecting your load.

4. ઓપરેટિંગ સૂચનાઓ

This section details the operation of the HM605T power supply, including setting parameters and using its various functions.

4.1 મૂળભૂત કામગીરી

1. Turning On/Off Output: દબાવો આઉટપુટ button on the front panel to enable or disable the power output.
2. સેટિંગ વોલ્યુમtage:
   • દબાવો V વોલ્યુમ પસંદ કરવા માટે બટનtage setting mode.
   • Rotate the large rotary knob to adjust the voltage value. The 4-digit display allows for precise adjustments.
3. Setting Current:
   • દબાવો I button to select the current setting mode.
   • Rotate the large rotary knob to adjust the current limit.
4. ડિસ્પ્લે મોડ્સ: દબાવો ડિસ્પ્લે button to switch between numerical and waveform display modes, allowing for real-time monitoring of output parameters.

4.2 અદ્યતન કાર્યો

1. Memory Function (M1-M6): The power supply allows for storing and recalling up to 6 sets of frequently used voltage and current parameters. Press the સ્મૃતિ button to access the memory presets. Use the rotary knob to navigate and select a preset, then press the knob to load it.
2. કીબોર્ડ લોક: સેટિંગ્સમાં આકસ્મિક ફેરફારો અટકાવવા માટે, દબાવો ESC/Lock button to lock the keyboard. Press it again to unlock.
3. પીસી સોફ્ટવેર નિયંત્રણ: The HM605T features a standard USB interface on the rear panel for connection to a computer. Install the provided PC software (from the included CD or manufacturer's website) to utilize Modbus programming instruction set and programmable sequence output. This allows for remote control and data logging.
4. Front USB Charging Ports: The dual 5V 1.5A USB ports on the front panel can be used for charging compatible devices or powering low-current electronics.

4.3 Instructional Video

5. જાળવણી

યોગ્ય જાળવણી તમારા પાવર સપ્લાયના લાંબા સમય સુધી અને વિશ્વસનીય સંચાલનની ખાતરી આપે છે.

• સફાઈ: યુનિટના બાહ્ય ભાગને નિયમિતપણે નરમ, સૂકા કપડાથી સાફ કરો. ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટનો ઉપયોગ કરશો નહીં.
• વેન્ટિલેશન: Keep the cooling fan and vents free from dust and obstructions. The fan operates automatically to maintain optimal temperature.
• સંગ્રહ: જ્યારે લાંબા સમય સુધી ઉપયોગમાં ન હોય, ત્યારે વીજ પુરવઠો ઠંડી, સૂકી જગ્યાએ, સીધા સૂર્યપ્રકાશ અને અતિશય તાપમાનથી દૂર રાખો.

6. મુશ્કેલીનિવારણ

This section addresses common issues you might encounter with the HM605T power supply.

• કોઈ શક્તિ નથી:
  • Check if the power cord is securely connected to both the unit and the AC outlet.
  • Ensure the main power switch on the rear panel is in the 'ON' position.
  • Verify the fuse in the AC input socket. Replace if blown (refer to specifications for correct fuse type).
• કોઈ આઉટપુટ નથી:
  • દબાવો આઉટપુટ button to ensure the output is enabled.
  • Check for active protection (OVP, OCP, OPP). If any protection is triggered, the output will be disabled. Address the cause of the protection event (e.g., reduce voltage/current settings, check load).
  • Ensure the load is correctly connected to the output terminals with proper polarity.
• ખોટા વાંચન:
  • Verify that the measurement leads are properly connected and not damaged.
  • Ensure the device is operating within its specified temperature range.
• PC Software Connection Issues:
  • Ensure the USB cable is securely connected to both the power supply and the computer.
  • Verify that the correct drivers and software are installed on your PC. Refer to the included CD or manufacturer's webનવીનતમ સંસ્કરણો માટેની સાઇટ.

7. સ્પષ્ટીકરણો

8. વોરંટી અને સપોર્ટ

For warranty information and technical support, please refer to the documentation included with your product or contact HANMATEK customer service. The product package includes a manual and a CD with software and drivers. Ensure you keep your purchase receipt for warranty claims.