Laserliner MultiScanner Plus 080.967A Instruction Manual

1. પરિચય

Thank you for choosing the Laserliner MultiScanner Plus 080.967A. This advanced wall scanner is designed to accurately detect various materials hidden behind walls, ceilings, and floors, including wood studs, metal objects (ferrous and non-ferrous), and live AC electrical wires. Please read this manual thoroughly before operation to ensure safe and effective use of the device.

2. ઉત્પાદન ઓવરview

The MultiScanner Plus 080.967A features a clear display, intuitive controls, and multiple scanning modes for comprehensive detection. Its ergonomic design ensures comfortable handling during use.

આકૃતિ 2.1: ફ્રન્ટ view of the Laserliner MultiScanner Plus 080.967A.

Figure 2.2: MultiScanner Plus 080.967A with its packaging and included USB-C charging cable, highlighting the built-in Li-Ion battery.

મુખ્ય લક્ષણો:

• Detects wood studs, metal (ferrous and non-ferrous), and live AC wires.
• Maximum detection depth of 120 mm (4.7 inches).
• Integrated Li-Ion battery, rechargeable via USB-C.
• Clear display with visual and audible indicators.
• Automatic calibration for accurate results.

3. સલામતી સૂચનાઓ

ઉપકરણને ઇજા કે નુકસાન ન થાય તે માટે હંમેશા નીચેની સલામતી સાવચેતીઓનું પાલન કરો:

• ઉપકરણ ખોલશો નહીં casing. Repairs should only be performed by authorized personnel.
• ઉપકરણને અતિશય તાપમાન, સીધો સૂર્યપ્રકાશ અથવા ઉચ્ચ ભેજ માટે ખુલ્લા કરવાનું ટાળો.
• ઉપકરણને પાણી અથવા અન્ય પ્રવાહીમાં બોળશો નહીં.
• Always assume that live electrical wires are present behind walls. Exercise extreme caution when drilling or cutting into walls.
• Before drilling, always verify the absence of live wires, pipes, or other hazards.
• The device is intended for detection purposes only and does not guarantee the complete absence of all hidden objects.
• ઉપકરણને બાળકોની પહોંચથી દૂર રાખો.

4. સેટઅપ

4.1 બેટરી ચાર્જ કરી રહી છે

The MultiScanner Plus is equipped with a built-in rechargeable Li-Ion battery. Before first use, fully charge the device.

1. Connect the included USB-C cable to the charging port on the device.
2. USB-C કેબલના બીજા છેડાને પ્રમાણભૂત USB પાવર એડેપ્ટર (શામેલ નથી) અથવા કમ્પ્યુટર USB પોર્ટ સાથે કનેક્ટ કરો.
3. The charging indicator on the device will show the charging status. Once fully charged, disconnect the cable.

આકૃતિ 4.1: ક્લોઝ-અપ view of the USB-C charging port and the "RE-CHARGE" indicator.

4.2 પ્રારંભિક માપાંકન

For accurate results, the device requires calibration before each scan or when changing scanning modes. Perform calibration on a clear section of the wall, free from any known objects.

1. દબાવો શક્તિ ઉપકરણ ચાલુ કરવા માટે બટન.
2. Place the device flat against the wall where you intend to scan.
3. દબાવો અને પકડી રાખો CAL button until the calibration process is complete (indicated on the display).
4. Move the device slowly across the surface during calibration as instructed on the screen.

Figure 4.2: The device display showing calibration instructions: "MOVE", "PRESS CAL", "CAL OK".

5. ઓપરેટિંગ સૂચનાઓ

૪.૧ મોડ પસંદ કરવો

દબાવો મોડ button to cycle through the available scanning modes: Stud Scan, Metal Scan, and AC Scan.

૪.૨ સ્કેનિંગ પ્રક્રિયા

Once a mode is selected and the device is calibrated, slowly move the scanner across the surface. The display will provide visual feedback, and an audible signal may indicate detection.

Figure 5.1: The device display indicating a detected object, with visual bars showing signal strength and location.

5.3 Detection Modes and Depths

• Stud Scan: Detects wood and metal studs behind drywall. Typical depth: up to 2 cm (0.8 inches).
• AC Scan: Detects live unshielded AC electrical wires. Typical depth: up to 5 cm (2 inches).
• Metal Scan: Detects ferrous and non-ferrous metals, such as pipes, rebar, and conduit. Typical depth: up to 10 cm (4 inches) for copper, up to 12 cm (4.7 inches) for rebar.

Figure 5.2: Illustration of typical detection depths for Stud Scan, AC Scan, and Metal Scan modes.

5.4 Live Wire Warning

The device will display a specific warning icon and/or emit an audible alert when live AC wires are detected, regardless of the selected mode. Always exercise extreme caution when this warning appears.

Figure 5.3: The device display showing the live AC wire warning symbol (AC 230V) and detection bars.

5.5 Practical Application Exampલેસ

આકૃતિ 5.4: ઉદાample of using the MultiScanner Plus to detect rebar or pipes within a concrete wall before drilling.

આકૃતિ 5.5: ઉદાample of using the MultiScanner Plus to locate a wooden stud behind drywall for secure mounting.

Figure 5.6: The device display showing a strong signal indicating a detected object, with the "STUD" and "CENTER" indicators.

6. જાળવણી

6.1 સફાઈ

ઉપકરણને સોફ્ટ સાથે સાફ કરો, ડીamp કાપડ. ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટનો ઉપયોગ કરશો નહીં. સંગ્રહ કરતા પહેલા ખાતરી કરો કે ઉપકરણ શુષ્ક છે.

6.2 સંગ્રહ

Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, ensure the battery is partially charged (around 50%) to prolong its lifespan.

7. મુશ્કેલીનિવારણ

8. સ્પષ્ટીકરણો

9. વોરંટી અને સપોર્ટ

For information regarding warranty terms, technical support, or service, please refer to the official Laserliner webસાઇટ પર જાઓ અથવા તમારા સ્થાનિક વિતરકનો સંપર્ક કરો. કોઈપણ વોરંટી દાવા માટે ખરીદીનો પુરાવો રાખો.