KETTLER Happy Navigator 4-in-1 Tricycle Instruction Manual

1. પરિચય

The KETTLER Happy Navigator 4-in-1 Tricycle is designed to adapt and grow with your child from 10 to 72 months of age. This manual provides essential information for the safe assembly, operation, and maintenance of your tricycle. Please read all instructions carefully before assembly and use to ensure the safety of your child and the longevity of the product.

2. સલામતી માહિતી

ચેતવણી: આ સૂચનાઓનું પાલન કરવામાં નિષ્ફળતા ગંભીર ઈજામાં પરિણમી શકે છે.

• Always supervise children when using the tricycle.
• Ensure all locking mechanisms are engaged before each use.
• The 5-point safety harness must always be used in stages where the child is secured.
• Do not use near stairs, hills, roadways, or swimming pools.
• એક સમયે માત્ર એક સવાર.
• Wear appropriate safety gear, including a helmet, when the child is independently riding.
• Regularly inspect the tricycle for loose parts, damage, or wear. Discontinue use if any damage is found.
• Maximum weight capacity: Consult product labeling for specific limits.

3. ભાગો યાદી

Before assembly, verify that all components listed below are present:

• Tricycle Frame (main body)
• ફ્રન્ટ વ્હીલ એસેમ્બલી
• Rear Wheel Assemblies (2)
• Seat with 5-point Safety Harness
• Parent Push-bar
• સૂર્ય કેનોપી
• Detachable Safety Surround (Guardrail)
• Foldable Middle Footrest
• Nonslip Pedals (2)
• Front Bottle Holder Basket
• Rear Storage Basket
• Assembly Hardware (screws, bolts, tools if included)

4. સેટઅપ અને એસેમ્બલી

Follow these steps to assemble your KETTLER Happy Navigator 4-in-1 Tricycle. Refer to the diagrams for visual guidance.

4.1. Initial Frame Assembly

1. બધા ઘટકો ખોલો અને તેમને સ્વચ્છ, સપાટ સપાટી પર મૂકો.
2. Attach the front wheel assembly to the main frame, ensuring it clicks securely into place.
3. Install the rear wheel assemblies onto the rear axle until they lock.

4.2. Seat and Safety Features Installation

1. Slide the seat into the designated slot on the frame until it is firmly seated.
2. Attach the detachable safety surround to the seat, ensuring both sides are securely fastened.
3. Connect the 5-point safety harness straps to the seat.

4.3. Handlebar, Parent Push-bar, and Canopy

1. Insert the handlebar into the front fork and tighten any securing bolts.
2. Attach the parent push-bar to the rear of the tricycle frame. Adjust its height as needed.
3. Mount the sun canopy onto the designated attachment points above the seat.

4.4. એસેસરીઝ

1. Attach the front bottle holder basket to the handlebar area.
2. Secure the rear storage basket to the back of the tricycle.

Figure 1: Fully assembled KETTLER Happy Navigator 4-in-1 Tricycle with canopy, parent handle, and safety features.

Figure 2: Key features including the extendable UV-protection canopy, 5-point safety harness, detachable safety surround, front bottle holder, rear basket, EVA suspension tires, and foldable middle footrest.

5. Operating Instructions: 4 Stagવૃદ્ધિના es

The KETTLER Happy Navigator is designed to evolve with your child's development. Adjust the tricycle according to the child's age and skill level.

Figure 3: Visual representation of the tricycle transforming through its four stages

5.1. એસtage 1: Parent-Controlled Mode (Approx. 10+ Months)

આ સમયે એસtage, the tricycle functions as a stroller-like ride-on, fully controlled by the parent.

• રૂપરેખાંકન: All safety features are in place: 5-point safety harness, padded high-back seat, detachable safety surround, extendable UV-protection canopy, and foldable middle footrest. The parent push-bar is attached and adjusted to a comfortable height.
• ઓપરેશન: The child's feet rest on the foldable middle footrest. The parent steers and pushes the tricycle using the adjustable parent handle. Engage the front freewheel system so pedals do not rotate with the wheel, preventing interference with the child's feet.

Figure 4: A child seated in the tricycle, demonstrating the parent-controlled mode with safety features engaged.

5.2. એસtage 2: Assisted Riding (Approx. 18+ Months)

The child begins to develop balance and motor skills while the parent maintains control.

• રૂપરેખાંકન: The 5-point safety harness and safety surround remain in place. The canopy can be removed if desired. The foldable middle footrest may still be used, or the child can attempt to place feet on the pedals (with freewheel engaged). The parent push-bar is still attached.
• ઓપરેશન: The parent continues to push and steer. The child can practice holding the handlebars and placing their feet on the pedals without propulsion.

Figure 5: Tricycle configured for assisted riding, with parent handle and safety surround, but without the canopy.

5.3. એસtage 3: Training Tricycle (Approx. 24+ Months)

The child learns to pedal with parental assistance.

• રૂપરેખાંકન: Remove the detachable safety surround. The 5-point safety harness can be removed or used as needed. Engage the pedals to the front wheel by disengaging the freewheel system. The parent push-bar remains attached for steering assistance and control.
• ઓપરેશન: The child practices pedaling while the parent guides the tricycle. The parent can assist with steering and provide stability.

Figure 6: Tricycle configured for training, with parent handle, but without canopy and safety surround.

5.4. એસtage 4: Independent Tricycle (Approx. 36+ Months)

The child is ready to pedal and steer independently.

• રૂપરેખાંકન: Remove the parent push-bar. The child uses the pedals and handlebars for full control.
• ઓપરેશન: The child rides the tricycle independently. Ensure the child wears a helmet and is supervised in a safe environment.

Figure 7: Tricycle configured for independent riding, without parent handle, canopy, or safety surround.

5.5. Freewheel System

The front freewheel system allows the pedals to be disengaged from the front wheel. This is crucial for parent-controlled stages to prevent the child's feet from being caught by rotating pedals. To engage/disengage, locate the mechanism on the front wheel hub and follow the arrows or instructions printed on it.

Figure 8: Illustration highlighting the telescoping push rod, limited turn feature, and the on/off freewheel system.

6. જાળવણી

6.1. સફાઈ

• Wipe down the frame and plastic parts with a damp કાપડ અને હળવો સાબુ.
• ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટનો ઉપયોગ કરશો નહીં.
• The seat cushion can be spot cleaned or hand washed with mild detergent.

6.2. સંગ્રહ

• Store the tricycle in a dry, cool place away from direct sunlight and extreme temperatures.
• Protect from rain and moisture to prevent rust on metal components.

6.3. નિરીક્ષણ

• Periodically check all bolts, nuts, and fasteners to ensure they are tight.
• Inspect wheels and tires for wear or damage.
• Ensure the safety harness and buckles are functioning correctly.

7. મુશ્કેલીનિવારણ

8. સ્પષ્ટીકરણો

• મોડલ: 8811
• ઉત્પાદનના પરિમાણો (L x W x H): 30 x 20.5 x 40 ઇંચ
• વસ્તુનું વજન: 18 પાઉન્ડ
• ભલામણ કરેલ ઉંમર: 10 મહિના અને તેથી વધુ
• ફ્રેમ સામગ્રી: High quality steel
• વ્હીલ પ્રકાર: Shock absorbing EVA wheels
• સલામતી સુવિધાઓ: 5-point safety harness, detachable safety surround, foot brake

Figure 9: Labeled dimensions of the KETTLER Happy Navigator 4-in-1 Tricycle.

9. વોરંટી અને સપોર્ટ

For warranty information, product support, or to order replacement parts, please contact KETTLER customer service. Refer to your purchase documentation or the official KETTLER webસંપર્ક વિગતો માટે સાઇટ.

ઉત્પાદક: LITTLE TIGER