FLEXISPOT M17A-40

FLEXISPOT સ્ટેન્ડિંગ ડેસ્ક કન્વર્ટર M17A-40 સૂચના માર્ગદર્શિકા

Model: M17A-40

પરિચય

Thank you for choosing the FLEXISPOT Standing Desk Converter M17A-40. This manual provides essential information for the safe and efficient use of your new workstation. This 40-inch sit-to-stand desk riser is designed to transform any desk into an ergonomic workspace, allowing for seamless transitions between sitting and standing positions. Its spacious two-tier design accommodates monitors, laptops, keyboards, and mice, promoting comfort and productivity.

સલામતી માહિતી

એસેમ્બલી અને ઉપયોગ કરતા પહેલા કૃપા કરીને બધી સલામતી સૂચનાઓ વાંચો અને સમજો. આ સૂચનાઓનું પાલન કરવામાં નિષ્ફળતા ઉત્પાદનને ઈજા અથવા નુકસાન પહોંચાડી શકે છે.

  • The minimum height of the desktop is 4.7 inches.
  • The maximum weight recommendation for the desktop is 44 pounds.
  • The maximum weight recommendation for the keyboard tray is 4.4 pounds.
  • Always ensure the desk converter is stable and not overloaded.
  • Keep hands and fingers clear of moving parts during height adjustment to prevent pinching or injury.
  • Do not place hot liquids directly on the surface without a coaster.
  • Ensure all cables are properly managed to avoid snagging or damage during height adjustments.

સેટઅપ

The FLEXISPOT Standing Desk Converter M17A-40 arrives almost fully assembled, requiring minimal setup to get started.

  1. અનબૉક્સિંગ: Carefully remove the desk converter from its packaging. Place it on a stable, flat surface where it will be used.
  2. Attach Optional Keyboard Tray: The keyboard tray is designed for easy attachment. Align the tray with the designated slots on the underside of the main desktop. Slide it into place until it clicks securely. Ensure both sides are firmly latched.
FLEXISPOT Standing Desk Converter M17A-40 with two monitors and a laptop
The FLEXISPOT Standing Desk Converter M17A-40, ready for use with multiple devices.

Once the keyboard tray is attached, your desk converter is ready to be customized for your workspace.

ઓપરેટિંગ સૂચનાઓ

The FLEXISPOT Standing Desk Converter features a powerful gas spring system for smooth and effortless height adjustments.

  1. Heંચાઇ સમાયોજિત: To raise or lower the desktop, locate the single lever on the right side of the unit. Squeeze the lever to release the locking mechanism.
  2. Raising the Desktop: While holding the lever, gently lift the desktop to your desired standing height. Release the lever to lock it into position. The gas spring system will assist in the upward movement.
  3. Lowering the Desktop: While holding the lever, gently press down on the desktop to lower it to your desired sitting height. Release the lever to lock it into position.
Illustration showing the height adjustment range of the FLEXISPOT Standing Desk Converter from 4.7 to 19.7 inches
Visual representation of the desk converter's height adjustment capabilities.

The 2-tier design provides ample space for your setup:

  • top tier (40'' width) can comfortably hold a monitor up to 27'' or multiple smaller monitors.
  • base tier (12.1'' depth) is designed for a standard keyboard and mouse, or a 13'' laptop, allowing for ergonomic typing and mouse use.
ટોપ-ડાઉન view of the FLEXISPOT Standing Desk Converter M17A-40 showing its 40-inch width and 23.2-inch depth, with a laptop and two monitors
Detailed dimensions of the spacious 2-tier desktop.

જાળવણી

Regular maintenance ensures the longevity and smooth operation of your FLEXISPOT Standing Desk Converter.

  • સફાઈ: સોફ્ટ સાથે સપાટીઓ સાફ કરો, ડીamp કાપડ. ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટ્સ ટાળો જે ફિનિશને નુકસાન પહોંચાડી શકે છે.
  • લુબ્રિકેશન: Periodically check the moving parts of the gas spring system. If movement becomes stiff, apply a small amount of silicone-based lubricant to the pivot points.
  • ફાસ્ટનર્સ: સમયાંતરે બધા સ્ક્રૂ અને ફાસ્ટનર્સ કડક છે કે નહીં તેની ખાતરી કરવા માટે તપાસો. જો જરૂરી હોય તો ફરીથી કડક કરો.

મુશ્કેલીનિવારણ

If you encounter any issues with your desk converter, refer to the following common troubleshooting tips:

  • ઊંચાઈ ગોઠવવામાં મુશ્કેલી: Ensure the lever is fully squeezed when attempting to adjust the height. Check for any obstructions preventing smooth movement. Verify that the weight on the desktop does not exceed the maximum capacity.
  • ધ્રુજારી: Ensure the desk converter is placed on a flat, stable surface. Check that all components are securely assembled and tightened.
  • Keyboard Tray Loose: Verify that the keyboard tray is correctly inserted into its slots and the locking mechanisms are engaged.

જો સમસ્યાઓ ચાલુ રહે, તો કૃપા કરીને ગ્રાહક સપોર્ટનો સંપર્ક કરો.

વિશિષ્ટતાઓ

લક્ષણવિગત
બ્રાન્ડફ્લેક્સીસ્પોટ
મોડલ નંબરM17A-40
ઉત્પાદન પરિમાણો23"D x 55"W x 19.7"H
રંગકાળો
શૈલીઆધુનિક
ટોચની સામગ્રીનો પ્રકારલાકડું
વસ્તુનું વજન36 પાઉન્ડ
મહત્તમ ઊંચાઈ19.7 ઇંચ
ન્યૂનતમ ઊંચાઈ4.7 ઇંચ
Maximum Weight Recommendation (Desktop)44 પાઉન્ડ
Maximum Weight Recommendation (Keyboard Tray)4.4 પાઉન્ડ
છાજલીઓની સંખ્યા2
આવશ્યક એસેમ્બલીહા (ઓછામાં ઓછા)

વોરંટી અને આધાર

The FLEXISPOT Standing Desk Converter M17A-40 comes with a Limited Warranty. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official FLEXISPOT webસાઇટ

For customer support, including assistance with assembly, operation, or troubleshooting, please contact FLEXISPOT customer service. Contact information can typically be found on the product packaging or the official FLEXISPOT webસાઇટ

સંબંધિત દસ્તાવેજો - M17A-40

પ્રિview FlexiSpot M1B/M1W સિટ-સ્ટેન્ડ ડેસ્ક કન્વર્ટર ઇન્સ્ટોલેશન માર્ગદર્શિકા
FlexiSpot M1B/M1W સિટ-સ્ટેન્ડ ડેસ્ક કન્વર્ટર માટે સ્ટેપ-બાય-સ્ટેપ ઇન્સ્ટોલેશન માર્ગદર્શિકા, જેમાં સ્પષ્ટીકરણો, ભાગોની સૂચિ, સલામતી ચેતવણીઓ અને એસેમ્બલી સૂચનાઓનો સમાવેશ થાય છે.
પ્રિview FlexiSpot M7L-US કમ્પ્યુટર રાઇઝર ઇન્સ્ટોલેશન માર્ગદર્શિકા અને વોરંટી
FlexiSpot M7L-US Sit-Stand ડેસ્કટોપ વર્કસ્ટેશન માટે સત્તાવાર ઇન્સ્ટોલેશન માર્ગદર્શિકા અને મર્યાદિત વોરંટી માહિતી. તમારા FlexiSpot કમ્પ્યુટર રાઇઝર માટે વોરંટી શરતો કેવી રીતે એસેમ્બલ કરવી, ઉપયોગ કરવો અને સમજવી તે જાણો.
પ્રિview FlexiSpot EM7L મોટરાઇઝ્ડ કમ્પ્યુટર રાઇઝર ઇન્સ્ટોલેશન માર્ગદર્શિકા
FlexiSpot EM7L મોટરાઇઝ્ડ કમ્પ્યુટર રાઇઝર માટે વ્યાપક ઇન્સ્ટોલેશન માર્ગદર્શિકા. સુવિધાઓમાં સ્પષ્ટીકરણો, ભાગોની સૂચિ, પગલું-દર-પગલાં એસેમ્બલી સૂચનાઓ, મુશ્કેલીનિવારણ ટિપ્સ અને મર્યાદિત વોરંટી માહિતી શામેલ છે.
પ્રિview FlexiSpot M3B/M3W Computer Riser Installation Guide and Warranty Information
Comprehensive installation guide and warranty details for the FlexiSpot M3B/M3W Computer Riser and Sit-Stand Desktop Workstation. Learn how to assemble, use, and understand the product's coverage.
પ્રિview FlexiSpot ML2B/ML2W Computer Riser Installation Guide
Step-by-step installation guide for the FlexiSpot ML2B/ML2W Computer Riser. Learn about specifications, parts, tools, and how to set up your sit-stand desktop workstation safely and effectively.
પ્રિview FlexiSpot ML2B/ML2W Computer Riser Installation Guide and Warranty
Comprehensive installation guide and limited warranty details for the FlexiSpot ML2B/ML2W Computer Riser. This sit-stand desktop workstation guide covers specifications, parts, assembly steps, usage instructions, and warranty coverage from FlexiSpot.