Roxel RAC-10 Bedside Alarm Clock with Wireless Charging User Manual

1. પરિચય

This manual provides detailed instructions for the operation and maintenance of your Roxel RAC-10 Bedside Alarm Clock. The RAC-10 combines a digital alarm clock with wireless fast charging capabilities, a dimmable LED display, RGB mood lighting, and a USB output port. Please read this manual thoroughly before use to ensure proper functionality and to maximize your product experience.

છબી 1.1: આગળ view of the Roxel RAC-10 Bedside Alarm Clock, showing the digital display and control buttons.

2. ઉત્પાદન સુવિધાઓ

• વાયરલેસ ફાસ્ટ ચાર્જિંગ: Supports 5W, 10W, and 15W wireless charging for compatible devices.
• Dimmable LED Display: Adjustable brightness for the time and information display.
• ડ્યુઅલ એલાર્મ ઘડિયાળ: Set two independent alarms for different schedules.
• Temperature and Calendar Display: Shows current room temperature and perpetual calendar information.
• RGB Mood Lighting: Customizable ambient light with a wide range of colors.
• યુએસબી આઉટપુટ પોર્ટ: Allows charging of an additional device via USB cable.
• કોમ્પેક્ટ અને સ્ટાઇલિશ ડિઝાઇન: Modern aesthetic suitable for any bedroom decor.

3. સેટઅપ સૂચનાઓ

3.1 પાવર કનેક્શન

1. Unpack the Roxel RAC-10 and all accessories.
2. Connect the provided power adapter to the DC input port on the back of the alarm clock.
3. Plug the power adapter into a standard wall outlet. The display will illuminate, and the clock will be ready for initial setup.

૨.૧ પ્રારંભિક સમય અને તારીખ સેટિંગ

Refer to the 'Operating Instructions' section for detailed steps on setting the time, date, and other preferences.

4. ઓપરેટિંગ સૂચનાઓ

4.1 Wireless Fast Charging

The RAC-10 features a wireless charging pad on its top surface. It supports 5W, 10W, and 15W charging speeds.

1. Ensure the alarm clock is powered on.
2. Place your Qi-compatible smartphone or other device directly onto the center of the charging pad.
3. A charging indicator (e.g., an icon on the display or an LED) will typically appear, confirming that charging has begun.
4. For optimal charging, ensure the device is centered on the pad and remove any thick cases that might interfere with charging.

Image 4.1: A smartphone placed on the top surface of the Roxel RAC-10, indicating wireless charging in progress.

4.2 USB Output Charging

An additional USB output port is located on the back of the unit, allowing you to charge another device simultaneously using a USB cable.

1. Connect a USB charging cable to the USB output port on the RAC-10.
2. Connect the other end of the cable to your device (e.g., a smartwatch or a second smartphone).
3. ચાર્જિંગ આપમેળે શરૂ થશે.

Image 4.2: The Roxel RAC-10 with a smartphone wirelessly charging on top and a smartwatch charging via the USB output port.

4.3 સમય અને તારીખ સેટ કરવી

Specific button functions for time and date setting are typically indicated by symbols or labels on the device. Common buttons include 'SET', 'MODE', '+', and '-'.

1. Press the 'MODE' or 'SET' button to enter time setting mode. The hour digits will usually flash.
2. કલાક ગોઠવવા માટે '+' અને '-' બટનોનો ઉપયોગ કરો.
3. Press 'MODE' or 'SET' again to move to minute setting, then adjust with '+' and '-'.
4. Continue pressing 'MODE' or 'SET' to cycle through year, month, and day settings, adjusting each with '+' and '-'.
5. Press 'MODE' or 'SET' one last time, or wait a few seconds, to exit setting mode.

4.4 Dual Alarm Setup

The RAC-10 allows for two independent alarms (Alarm 1 and Alarm 2).

1. Press the 'ALARM' button (often labeled with a bell icon) to select Alarm 1 or Alarm 2. The alarm icon and hour digits will flash.
2. Use the '+' and '-' buttons to set the desired alarm hour.
3. Press 'ALARM' again to move to minute setting, then adjust with '+' and '-'.
4. Press 'ALARM' again to confirm and activate the alarm. The alarm icon will remain lit on the display.
5. To deactivate an alarm, press the 'ALARM' button until the corresponding alarm icon disappears from the display.

Image 4.3: The Roxel RAC-10 displaying two different alarm times, illustrating the dual alarm functionality.

4.5 ડિસ્પ્લે બ્રાઇટનેસ એડજસ્ટમેન્ટ

The LED display brightness can be adjusted to suit your preference, including turning it off completely.

1. Locate the 'DIMMER' or 'BRIGHTNESS' button (often indicated by a sun icon).
2. Press this button repeatedly to cycle through different brightness levels.
3. Continue pressing until you reach your desired brightness or turn the display off.

Image 4.4: A series of Roxel RAC-10 units demonstrating five different adjustable brightness levels for the display.

4.6 RGB Mood Lighting

The RAC-10 features customizable RGB mood lighting to create a personalized ambiance.

1. Locate the 'LIGHT' or 'RGB' button (often indicated by a light bulb icon).
2. Press this button to turn the mood light on/off.
3. Press repeatedly to cycle through various color options and lighting modes.
4. Hold the button to potentially adjust brightness or activate a color-changing sequence, depending on the model's specific features.

Image 4.5: Multiple Roxel RAC-10 units displaying various RGB mood lighting colors, illuminating the surrounding area.

5. જાળવણી

5.1 સફાઈ

To maintain the appearance and functionality of your Roxel RAC-10:

• સફાઈ કરતા પહેલા ઉપકરણ અનપ્લગ થયેલ છે તેની ખાતરી કરો.
• નરમ, શુષ્ક અથવા સહેજ ડીનો ઉપયોગ કરોamp સપાટીઓ સાફ કરવા માટે કાપડ.
• Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish or internal components.

5.2 સંગ્રહ

If storing the device for an extended period, unplug it and store it in a cool, dry place away from direct sunlight and extreme temperatures.

6. મુશ્કેલીનિવારણ

7. સ્પષ્ટીકરણો

8. વોરંટી અને સપોર્ટ

The Roxel RAC-10 comes with a 1-year availability for spare parts. For any product inquiries, technical support, or warranty claims, please refer to the contact information provided with your purchase or visit the official Roxel webસાઇટ