તુયા 2-ચેનલ વાયરલેસ રિલે મોડ્યુલ (મોડેલ JGTY02H) વપરાશકર્તા માર્ગદર્શિકા

1. પરિચય

This manual provides detailed instructions for the installation, configuration, and operation of the Tuya 2-Channel Wireless Relay Module (Model JGTY02H). This smart switch module enables remote control of two independent electrical devices or appliances via Wi-Fi, Bluetooth, and 433MHz RF. It supports integration with the Smart Life/Tuya app, as well as voice control through Amazon Alexa and Google Home.

2. પેકેજ સામગ્રી

ખાતરી કરો કે બધી વસ્તુઓ તમારા પેકેજમાં હાજર છે:

• 1 x Tuya 2-Channel Wireless Smart Home Switch Module
• 1 x સૂચના માર્ગદર્શિકા

Image: The Tuya 2-Channel Wireless Relay Module shown alongside its retail packaging and included instruction manual.

3. ઉત્પાદન સ્પષ્ટીકરણો

4. ઉત્પાદન ઓવરview

Familiarize yourself with the components and indicators of the relay module.

છબી: ટોચ view of the relay module, highlighting input and output terminals, reset button, manual operation buttons for R1 and R2, and status indicators.

છબી: વિગતવાર view of the internal circuit board, showing the reset button, manual switches, relays, network indicator, and input terminals for DC 7-32V and USB 5V.

• ઇનપુટ ટર્મિનલ્સ: For power supply (DC 7-32V or USB 5V).
• રીસેટ બટન: Used for pairing and resetting the device.
• Manual Switches (R1, R2): Allow manual control of each relay channel.
• રિલે: Two independent relays for controlling connected devices.
• નેટવર્ક સૂચક: LED light indicating network status.
• Output Terminals (NC, COM, NO): Normally Closed, Common, and Normally Open contacts for each relay.

5. સેટઅપ અને ઇન્સ્ટોલેશન

5.1 વાયરિંગ સૂચનાઓ

Ensure power is disconnected before performing any wiring. Refer to the diagrams below for common wiring configurations.

5.1.1 General Wiring Diagram (DC/AC 7-32V Input)

Image: This diagram illustrates connecting the relay module to a DC/AC 7-32V power source and controlling a linear actuator. The module supports both Smart Life/Tuya app control, 2.4G Wi-Fi, 433MHz RF, and voice control via Alexa and Google Assistant.

5.1.2 Automating a DC Motor

To automate a DC motor, connect the motor to the relay outputs as shown. The module's interlock mode can be used for directional control.

Image: Wiring diagram demonstrating how to connect a DC motor to the relay module. The input power for the module is 7-32V. Interlock mode can be configured by pressing the mode switch button.

5.1.3 Wiring for a 3-Wire AC Motor (e.g., Shutter/Curtain)

For controlling 3-wire AC motors, such as those found in electric shutters or curtains, follow this wiring configuration. Ensure the interlock mode is set in the Tuya Smart app.

Image: Wiring diagram for connecting a 3-wire AC motor (like a shutter motor) to the relay module. The input power is DC/AC 7-32V. The neutral wire, shutter open, and shutter close wires are indicated. Interlock mode should be selected and set in the Tuya Smart app.

5.2 App Pairing (Smart Life/Tuya App)

1. એપ ડાઉનલોડ કરો: Download and install the "Smart Life" or "Tuya Smart" app from your mobile device's app store (available for iOS and Android).
2. નોંધણી/લોગ ઇન કરો: એક એકાઉન્ટ બનાવો અથવા તમારા હાલના એકાઉન્ટમાં લોગ ઇન કરો.
3. પાવર ચાલુ: Connect the relay module to its power supply (DC 7-32V).
4. જોડી મોડ દાખલ કરો: Press and hold the "Reset" button on the module until the network indicator LED starts blinking rapidly. This indicates it's in pairing mode.
5. ઉપકરણ ઉમેરો: Open the Smart Life/Tuya app. The app should automatically discover the device via Bluetooth. If not, tap the "+" icon in the top right corner, then select "Add Device" and choose "Auto Scan" or manually select "Switch (Wi-Fi)".
6. Wi-Fi થી કનેક્ટ કરો: Follow the in-app instructions to connect the module to your 2.4GHz Wi-Fi network. Enter your Wi-Fi password when prompted.
7. ઉપકરણનું નામ બદલવું: Once successfully added, you can rename the device and each individual channel within the app for easier identification.

નોંધ: Even if the relay module loses Wi-Fi connection after initial setup, you can still control it via Bluetooth using your phone within range.

6. ઓપરેટિંગ મોડ્સ

The Tuya 2-Channel Wireless Relay Module supports various operating modes configurable through the Smart Life/Tuya app:

• Momentary (Inching) Function:

  When activated, the relay will turn on for a set duration (default 1 second) and then automatically turn off. This is ideal for applications like garage door openers. The inching time can be adjusted from 1 second to 1 hour within the app.

  

  Image: This diagram illustrates how to modify a remote control for use with the relay module in inching mode, often used for momentary actions like opening a garage door.

• Latching (Self-Locking) Mode:

  In this mode, each relay acts as a standard on/off switch. Pressing the button (physical or in-app) toggles the relay's state (on or off). This allows independent control of two connected devices.

• ઇન્ટરલોક મોડ:

  This mode ensures that only one relay can be active at a time. When one relay is turned on, the other is automatically turned off. This is suitable for applications requiring directional control, such as motor control for shutters or gates, preventing simultaneous activation in opposing directions.

૬.૪ સમયપત્રક અને ટાઈમર્સ

The app allows you to set up to 8 time schedules for automatic control. You can create single, repeat, or countdown timers to turn devices on or off at specified times. This feature is useful for automating daily routines or security lighting.

Image: A smartphone screen displaying the scheduling interface within the Smart Life/Tuya app, demonstrating how to set up automated control for devices like garage doors. The image also shows a house with two garage doors, implying individual control.

7. Smart Home Integration (Voice Control)

The Tuya 2-Channel Wireless Relay Module is compatible with Amazon Alexa and Google Home for convenient voice control.

૪.૨ એમેઝોન એલેક્સા સાથે કનેક્ટ થવું

1. Amazon Alexa એપ ખોલો.
2. Go to "Skills & Games" and search for "Smart Life" or "Tuya Smart".
3. Enable the skill and link your Smart Life/Tuya account using your app credentials.
4. Discover devices: Alexa will automatically discover your connected relay module. If not, say "Alexa, discover my devices" or manually initiate discovery in the Alexa app.
5. You can now control your devices using voice commands, e.g., "Alexa, turn on the light" or "Alexa, turn on Garage door."

7.2 Connecting to Google Home

1. Google Home ઍપ ખોલો.
2. Tap the "+" icon, then "Set up device" > "Works with Google".
3. માટે શોધો "Smart Life" or "Tuya Smart".
4. Link your Smart Life/Tuya account using your app credentials.
5. Your devices will be synchronized. You can now control them with voice commands, e.g., "Hey Google, turn off the bedroom light."

8. જાળવણી

• Keep the module in a dry environment, away from moisture and extreme temperatures.
• Do not expose the module to direct sunlight or corrosive substances.
• નરમ, સૂકા કપડાથી બાહ્ય ભાગ સાફ કરો. કઠોર રસાયણો અથવા ઘર્ષક ક્લીનર્સનો ઉપયોગ કરશો નહીં.
• Regularly check wiring connections to ensure they are secure.
• Ensure the firmware is updated through the Smart Life/Tuya app for optimal performance and security.

9. મુશ્કેલીનિવારણ

10. વોરંટી અને સપોર્ટ

This product is manufactured by QIANYI. For warranty information and technical support, please refer to the documentation provided with your purchase or contact your retailer. Typically, electronic products come with a standard manufacturer's warranty against defects in materials and workmanship for a period of one year from the date of purchase.

For further assistance, please consult the Smart Life/Tuya app's help section or visit the official Tuya Smart webવારંવાર પૂછાતા પ્રશ્નો અને સહાયક સંસાધનો માટેની સાઇટ.