પરિચય
ડબલ્યુampler Catacombs is a programmable, all-in-one delay and reverb pedal designed to provide a wide range of time-based effects for musicians. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Catacombs pedal.
ઉત્પાદન ઓવરview
The Catacombs pedal integrates 11 popular delay and reverb sounds into a single, intuitive unit. It features studio-quality 48 kHz sampling rate with 24-bit audio conversion, 8 onboard preset locations, and MIDI compatibility for up to 128 total presets.
આકૃતિ 1: આગળ view ડબલ્યુampler Catacombs pedal, showing controls for delay and reverb effects, input/output jacks, and footswitches.
આકૃતિ 2: કોણીય view ડબલ્યુampler Catacombs pedal, highlighting its compact design and various control knobs.
સેટઅપ
પાવર જરૂરીયાતો
ડબલ્યુampler Catacombs pedal requires a standard 9V DC power supply (not included) with a center-negative barrel connector. Ensure the power supply provides sufficient current for optimal performance.
તમારા પેડલને કનેક્ટ કરી રહ્યા છીએ
- તમારા વાદ્ય (દા.ત., ગિટાર) ને મોનો ઇન or સ્ટીરિયો ઇન પ્રમાણભૂત 1/4-ઇંચ ઇન્સ્ટ્રુમેન્ટ કેબલનો ઉપયોગ કરીને પેડલની જમણી બાજુએ જેક.
- કનેક્ટ કરો મોનો આઉટ or સ્ટીરિયો આઉટ પેડલની ડાબી બાજુએ જેક તમારા amplifier or next effect pedal.
- Connect the 9V DC power supply to the 9V ડીસી ઇનપુટ જેક.
- For MIDI control, connect a MIDI cable to the MIDI ઇનપુટ
ઓપરેટિંગ સૂચનાઓ
ઉપર નિયંત્રણોview
- Delay Type Knob: Selects between various delay types including Tape, SPC, FTE, BBD, ANLG, and DIGI.
- Reverb Type Knob: Selects between reverb types such as SHMR (Shimmer), PLT (Plate), SPR (Spring), ROOM, and HALL.
- Time/Shimmer Knob: Adjusts the delay time or shimmer intensity depending on the selected effect.
- Feedback/Decay Knob: Controls the number of delay repeats or the reverb decay time.
- Mod Rate Knob: Adjusts the modulation rate for effects with modulation.
- Delay Tone Knob: Shapes the tone of the delay repeats.
- Reverb Tone Knob: Shapes the tone of the reverb effect.
- Bypass/ALT Footswitch: Toggles the effect on/off. Hold to access alternate functions (ALT mode).
- Preset/Save Footswitch: Cycles through presets. Hold to save current settings to a preset location.
- Tap Tempo Footswitch: Taps in the desired delay tempo.
Saving and Recalling Presets
The Catacombs pedal allows for 8 onboard preset locations. To save a preset, adjust the knobs to your desired sound, then press and hold the Preset/Save footswitch until the indicator lights confirm the save. To recall a preset, short press the Preset/Save footswitch to cycle through the saved locations.
Alternate Functions (ALT Mode)
Some knobs have alternate functions accessible by holding the Bypass/ALT footswitch. When in ALT mode, the indicator light will change (e.g., from blue to red as noted in some user feedback), allowing you to adjust secondary parameters. Release the footswitch to return to normal operation.
જાળવણી
To ensure the longevity and optimal performance of your Wampler Catacombs pedal, follow these maintenance guidelines:
- Keep the pedal clean by wiping it with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- પેડલને સીધા સૂર્યપ્રકાશ અને અતિશય તાપમાનથી દૂર ઠંડી, સૂકી જગ્યાએ સંગ્રહિત કરો.
- લાંબા સમય સુધી ઉપયોગમાં ન હોય ત્યારે પાવર ડિસ્કનેક્ટ કરો.
- Regularly check all cable connections for secure fit.
મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| પેડલ લગાવવામાં આવે ત્યારે અવાજ આવતો નથી. | Incorrect power supply, faulty cables, incorrect input/output connections. | Verify power supply is 9V DC center-negative. Check all instrument cables. Ensure input is connected to IN and output to OUT. |
| Effect is too subtle or too extreme. | Knobs are set incorrectly, or in ALT mode unintentionally. | Adjust the relevant control knobs (Time, Feedback, Tone). Check if the pedal is in ALT mode and adjust accordingly. |
| Cannot save or recall presets. | Incorrect footswitch operation. | ખાતરી કરો કે તમે પકડી રાખ્યું છે Preset/Save footswitch long enough to save. For recalling, use short presses. |
| Noise or hum. | Ground loop, faulty power supply, interference. | Use an isolated power supply. Try different cables. Ensure proper grounding of all equipment. |
વિશિષ્ટતાઓ
- મોડલ: CATACOMBS
- પરિમાણો: 7.25 x 5.7 x 3.75 ઇંચ
- વસ્તુનું વજન: 1.39 પાઉન્ડ
- પાવર સ્ત્રોત: Corded Electric (9V DC, center-negative, power supply not included)
- સિગ્નલ ફોર્મેટ: એનાલોગ
- Audio Output Effects: વિલંબ, રિવર્બ
- Sampલિંગ દર: 48 kHz
- Audio Bit Depth: 24-બીટ
- પ્રીસેટ્સનો: 8 onboard, 128 via MIDI
- Manufacture Location: Designed and Built in the USA
વોરંટી અને આધાર
Wampler Pedals products are designed and built to high standards. For warranty information and technical support, please refer to the official Wampલેર પેડલ્સ webસાઇટ પર જાઓ અથવા તેમની ગ્રાહક સેવાનો સીધો સંપર્ક કરો. વોરંટી દાવાઓ માટે ખરીદીનો પુરાવો રાખો.
વધુ સહાયતા માટે, મુલાકાત લો Wampler Store on Amazon.
