1. પરિચય
This manual provides detailed instructions for the proper use, setup, and maintenance of the Hantek 6254BE Digital Automotive PC Oscilloscope. This device is designed for automotive diagnostics and general electronic measurements, offering high performance and versatility when connected to a personal computer.
2. સલામતી માહિતી
Please read and understand all safety instructions before operating the device to prevent injury or damage. Keep this manual for future reference.
- Always connect the oscilloscope to a computer via the provided USB cable.
- Ensure all connections are secure before applying power or making measurements.
- ઉપકરણને ભેજ, અતિશય તાપમાન અથવા સીધા સૂર્યપ્રકાશના સંપર્કમાં ન લાવો.
- મજબૂત ઇલેક્ટ્રોમેગ્નેટિક હસ્તક્ષેપવાળા વાતાવરણમાં ઉપકરણનો ઉપયોગ કરવાનું ટાળો.
- Only use accessories and probes supplied or approved by Hantek.
- લાયકાત ધરાવતા કર્મચારીઓને જ સેવાનો સંદર્ભ લો.
3. પેકેજ સામગ્રી
Verify that all items listed below are present in your package. If any items are missing or damaged, contact your vendor immediately.
આકૃતિ 3.1: Hantek 6254BE Digital Oscilloscope and included accessories. This image displays the main oscilloscope unit, various test leads, probes, USB cable, and a software CD.
- Hantek 6254BE Digital Oscilloscope Unit
- યુએસબી કેબલ
- Test Probes (Quantity and type may vary by package)
- Alligator Clip Leads
- Software CD (or download link)
- વપરાશકર્તા માર્ગદર્શિકા (આ દસ્તાવેજ)
4. ઉત્પાદન ઓવરview
The Hantek 6254BE is a 4-channel PC-based digital oscilloscope designed for a wide range of applications, particularly in automotive diagnostics. It features a 250MHz bandwidth, 1GSa/s real-time sampling rate, and high input sensitivity.
4.1. મુખ્ય લક્ષણો
- ચેનલો: 4
- બેન્ડવિડ્થ: 250MHz
- રીઅલ-ટાઇમ એસampલિંગ દર: 1GSa/s
- ઇનપુટ સંવેદનશીલતા: 2mV-10V/DIV
- સ્વચાલિત માપન: Over 20 types, including PASS/FAIL check.
- કનેક્ટિવિટી: USB 2.0 (Plug and Play)
- સિસ્ટમ સુસંગતતા: Supports Windows 7, 8, 10, 11.
4.2. ઉપકરણ લેઆઉટ
આકૃતિ 4.1: આગળ અને પાછળની પેનલ views of the Hantek 6254BE. The front panel shows the four BNC input channels (CH1, CH2, CH3, CH4). The rear panel includes the USB connection port and a 5V power input, though the USB XITM interface is noted as non-functional.
- CH1-CH4 BNC Inputs: Connect test probes and leads here.
- યુએસબી પોર્ટ: ડેટા ટ્રાન્સફર અને પાવર માટે તમારા પીસી સાથે જોડાય છે.
- 5V Power Input: Optional external power supply connection (if required by specific applications or PC USB power limitations).
- વેન્ટ્સ: Located on the sides and bottom for heat dissipation, ensuring stable performance.
આકૃતિ 4.2: Dimensions of the Hantek 6254BE (175mm x 105mm x 25mm) and an illustration of its ventilation system. The vents are crucial for maintaining optimal operating temperature and device longevity.
5. સેટઅપ સૂચનાઓ
Follow these steps to set up your Hantek 6254BE oscilloscope.
5.1. સિસ્ટમ જરૂરીયાતો
- Operating System: Windows 7, Windows 8, Windows 10, or Windows 11.
- USB 2.0 પોર્ટ અથવા ઉચ્ચ.
- Sufficient free disk space for software installation.
5.2. સૉફ્ટવેર ઇન્સ્ટોલેશન
- Insert the provided software CD into your computer's CD-ROM drive. If no CD drive is available, download the latest software and drivers from the official Hantek webસાઇટ
- Run the installer executable (e.g., "setup.exe") and follow the on-screen prompts.
- During installation, ensure that all necessary drivers for the Hantek 6254BE are selected and installed.
- Restart your computer if prompted after installation is complete.
5.3. Connecting the Oscilloscope
- Connect one end of the USB cable to the USB port on the rear panel of the Hantek 6254BE.
- USB કેબલના બીજા છેડાને તમારા કમ્પ્યુટર પર ઉપલબ્ધ USB 2.0 પોર્ટ સાથે કનેક્ટ કરો.
- The operating system should automatically detect the device and install any remaining drivers.
- Launch the Hantek oscilloscope software from your desktop or Start Menu.
આકૃતિ 5.1: The Hantek 6254BE connected to a tablet PC, demonstrating its compatibility with various Windows-based devices. Multiple units can be connected to a single computer for expanded channel capabilities.
આકૃતિ 5.2: The Hantek 6254BE connected to a laptop, displaying the oscilloscope software interface. This setup illustrates the typical operating environment for the device.
6. ઓપરેટિંગ સૂચનાઓ
This section outlines the basic operation of the Hantek 6254BE using the PC software.
6.1. Software Interface Overview
Upon launching the software, you will see the main waveform display area, control panels for each channel, trigger settings, time base controls, and measurement functions. Familiarize yourself with the layout.
6.2. Connecting Probes and Making Measurements
- Select the appropriate probe for your measurement. For general purpose, use the provided passive probes. For automotive applications, specialized probes (e.g., ignition probes, current clamps) may be required.
- Connect the probe to one of the BNC input channels (CH1-CH4) on the oscilloscope.
- Attach the probe tip to the test point and the ground clip to a suitable ground reference in the circuit under test.
- In the software, enable the corresponding channel and adjust the vertical scale (Volts/Div) and horizontal scale (Time/Div) to view the waveform clearly.
- Adjust trigger settings (Type, Source, Level) to stabilize the waveform.
6.3. Automotive Measurement Functions
The Hantek 6254BE is equipped with extensive automotive diagnostic capabilities, including over 80 types of pre-configured measurements.
આકૃતિ 6.1: The Hantek 6254BE in use for automotive diagnostics, connected to an engine. The software displays various waveforms, indicating its capability for ignition analysis, sensor testing, and bus diagnosis.
- Ignition Action: Analyze ignition patterns.
- Sensor Diagnosis: Test various automotive sensors (e.g., O2, MAP, Crankshaft Position).
- Bus Diagnosis: Monitor CAN bus, LIN bus, etc.
- Charging Circuits: Evaluate battery and alternator performance.
- Starter Circuits: Diagnose starter motor issues.
Access these functions through the dedicated automotive menu within the software. Each function typically provides guided setup and analysis tools.
6.4. Automatic Measurement and Analysis
The software offers more than 20 types of automatic measurements (e.g., Vpp, Vmax, Vmin, Freq, Period, Rise Time, Fall Time). These can be displayed directly on the screen for quick analysis.
- PASS/FAIL Check: Configure limits for specific waveform parameters. The system will automatically indicate if a waveform passes or fails these criteria.
- Dynamic Cursor Tracking: Use cursors to precisely measure voltage and time differences on the waveform.
- Waveform Record and Replay: Capture and save long waveform sequences for later review અને વિશ્લેષણ.
7. જાળવણી
Proper maintenance ensures the longevity and accuracy of your Hantek 6254BE oscilloscope.
- સફાઈ: ઉપકરણને સાફ કરવા માટે નરમ, સૂકા કપડાનો ઉપયોગ કરો. ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટનો ઉપયોગ કરશો નહીં.
- સંગ્રહ: Store the oscilloscope in a cool, dry place, away from direct sunlight and extreme temperatures.
- તપાસ સંભાળ: Handle probes carefully. Avoid bending or stressing the cables. Calibrate probes regularly if the software provides this option.
- સૉફ્ટવેર અપડેટ્સ: Periodically check the Hantek website for software and driver updates to ensure optimal performance and access to new features.
8. મુશ્કેલીનિવારણ
This section addresses common issues you might encounter with your Hantek 6254BE.
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| Device not recognized by PC. |
|
|
| કોઈ વેવફોર્મ પ્રદર્શિત નથી. |
|
|
| Unstable or noisy waveform. |
|
|
9. સ્પષ્ટીકરણો
Detailed technical specifications for the Hantek 6254BE Digital Automotive PC Oscilloscope.
| પરિમાણ | મૂલ્ય |
|---|---|
| મોડલ | 6254BE |
| ચેનલો | 4 |
| બેન્ડવિડ્થ | 250 MHz |
| રીઅલ-ટાઇમ એસampલિંગ દર | ૨.૫ જીએસએ/સેકન્ડ |
| ઇનપુટ સંવેદનશીલતા | 2mV/DIV - 10V/DIV |
| Verભી ઠરાવ | 8 બીટ |
| ઇનપુટ જોડાણ | ડીસી, એસી, જીએનડી |
| ઇનપુટ અવબાધ | 1MΩ 25pF |
| મહત્તમ ઇનપુટ વોલ્યુમtage | 40V (Probe X1) |
| સમય આધાર શ્રેણી | 2ns/div - 1000s/div |
| ટ્રિગર મોડ્સ | Edge, Pulse, Video, Slope, Overtime, Window, Pattern, Interval, Under time, UART, LIN, CAN, SPI, IIC |
| Automatic Measurements | Over 20 types (Vpp, Vmax, Vmin, Vtop, Vbase, Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle, Delay A→B↑, Delay A→B↓, Phase A→B↑, Phase A→B↓) |
| ઈન્ટરફેસ | યુએસબી 2.0 |
| ઓપરેટિંગ સિસ્ટમ સપોર્ટ | વિન્ડોઝ 7, વિન્ડોઝ 8, વિન્ડોઝ 10, વિન્ડોઝ 11 |
| પરિમાણો (L x W x H) | ૯૭ મીમી x ૯૮ મીમી x ૧૮.૫ મીમી (આશરે ૩.૮૨" x ૨.૭૬" x ૦.૭૩") |
| વજન | આશરે. 1.35 કિગ્રા (2.98 પાઉન્ડ) |
10. વોરંટી અને સપોર્ટ
Hantek provides a limited warranty for this product against defects in materials and workmanship. The warranty period typically starts from the date of purchase. Please refer to the warranty card included with your product or visit the official Hantek webવિગતવાર વોરંટી નિયમો અને શરતો માટે સાઇટ.
For technical support, software updates, or service inquiries, please contact Hantek customer service through their official website or the contact information provided in your product documentation. When contacting support, please have your product model (6254BE) and serial number ready.
ઉત્પાદક: હાંટેક
Webસાઇટ: www.hantek.com
