ESKY 150 EC

ESKY 150 EC Micro RC Helicopter Instruction Manual

Model: 150 EC

પરિચય

This manual provides essential instructions for the safe and effective operation of your ESKY 150 EC Micro RC Helicopter. The 150 EC is a third-generation micro remote-controlled helicopter designed for ease of operation. It features a 6-axis gyroscope for stable flight, atmospheric pressure and altitude hold capabilities, hovering, and a controllable flight path. It also includes a one-button shutdown function for emergency situations.

બૉક્સમાં શું છે

Carefully unpack all components and ensure all items listed below are present. If any items are missing or damaged, please contact customer support.

Contents of the ESKY 150 EC Micro RC Helicopter package, including the helicopter, remote control, spare blades, battery, USB charger, and tools.

Image: All components included in the ESKY 150 EC package.

ઉત્પાદન ઓવરview

Helicopter Components

બાજુ view of the ESKY 150 EC Micro RC Helicopter, yellow with blue and white accents.

છબી: બાજુ view of the ESKY 150 EC helicopter.

The ESKY 150 EC helicopter features a durable frame, main rotor blades, a tail rotor, landing skids, and a removable canopy. The main rotor provides lift and control, while the tail rotor controls yaw (left/right rotation).

રીમોટ કંટ્રોલ (ટ્રાન્સમીટર)

The MINI 6X 6-Channel 2.4GHz transmitter is used to control the helicopter. Familiarize yourself with its various controls:

Labeled diagram of the MINI 6X 6-Channel 2.4GHz Remote Control, showing Mode Switch, Power LED, Throttle Cut Switch, Rudder, Throttle, Aileron, Elevator, Trim controls, and Power Switch.

Image: Labeled diagram of the MINI 6X Remote Control.

સેટઅપ

1. Charging the Helicopter Battery

The helicopter uses a 1S 3.7V 150mAh Li-Po battery. Always use the provided USB charger.

  1. Connect the USB charger to a USB power source (e.g., computer USB port, USB wall adapter).
  2. Connect the helicopter battery to the USB charger. Ensure the polarity is correct.
  3. The indicator light on the charger will show the charging status (refer to charger instructions for specific light patterns).
  4. Once charging is complete, disconnect the battery from the charger. Do not overcharge.
Two USB chargers with Li-Po batteries connected, illustrating the charging process.

Image: Connecting the Li-Po battery to the USB charger.

2. Installing the Helicopter Battery

Ensure the helicopter is powered off before installing the battery.

  1. Gently remove the helicopter's canopy to access the battery compartment.
  2. Insert the charged Li-Po battery into the compartment.
  3. Connect the battery plug to the helicopter's power port.
  4. Carefully reattach the canopy.
Helicopter with its canopy removed, showing the internal battery compartment.

Image: Helicopter with canopy removed, revealing the battery compartment.

Helicopter with the Li-Po battery correctly inserted into its compartment.

Image: Battery inserted into the helicopter.

3. Powering On and Binding

The helicopter and remote control must be bound (paired) before flight.

  1. Place the helicopter on a flat, level surface.
  2. Ensure the remote control's throttle stick is in the lowest position.
  3. Turn on the helicopter's power switch. The helicopter's indicator light will flash.
  4. Press and hold the Power Switch on the remote control until it turns on. The remote control's indicator light will flash.
  5. Wait for a few seconds. The indicator lights on both the helicopter and remote control should become solid, indicating a successful binding.
  6. If binding fails, turn off both devices and repeat the process.

ઓપરેટિંગ સૂચનાઓ

Always operate the helicopter in an open, safe area, away from people, animals, and obstacles. Ensure you have sufficient space for flight.

મૂળભૂત ફ્લાઇટ નિયંત્રણો

ટેક-ઓફ અને લેન્ડિંગ

  1. ટેકઓફ: Slowly push the throttle stick up. The helicopter will gain altitude. Maintain a steady throttle to achieve a stable hover.
  2. ઉતરાણ: Slowly pull the throttle stick down. The helicopter will descend. Reduce throttle completely upon landing.

Altitude Hold and Hover

The 150 EC is equipped with a 6-axis gyroscope and atmospheric pressure sensor for stable flight and altitude hold. Once the helicopter reaches a desired altitude, release the throttle stick to its center position. The helicopter will attempt to maintain its current height.

Flight Modes (Hi/Lo)

The remote control features a Mode Switch. It is recommended to use the "Hi" mode for more stable and responsive flight. The "Lo" mode may exhibit a slight delay in controller response.

One-Button Shutdown

In an emergency or if the helicopter is out of control, use the Throttle Cut Switch to immediately stop the motors. This function can also be used for a quick, controlled shutdown after landing.

જાળવણી

સફાઈ

Wipe the helicopter and remote control with a soft, dry cloth after each use. Avoid using water or chemical cleaners, as they can damage electronic components.

બ્લેડ રિપ્લેસમેન્ટ

If main or tail blades become damaged, replace them with the provided spares using the included screwdriver. Ensure blades are securely fastened but not overtightened.

Four circular close-up images showing details of the helicopter: battery compartment, main rotor attachment, tail rotor, and canopy removal.

છબી: વિગતવાર views of helicopter components, including rotor attachment points.

બેટરી કેર

મુશ્કેલીનિવારણ

સમસ્યાસંભવિત કારણઉકેલ
Helicopter does not respond to remote control.Not bound, low battery (helicopter or remote), power off.Ensure both devices are powered on. Re-bind the helicopter and remote control. Charge helicopter battery. Replace remote control batteries.
Helicopter drifts during hover.Uneven trim settings, slight wind, unbalanced blades.Adjust trim controls on the remote control. Operate in a calm environment. Check blades for damage and replace if necessary.
Helicopter does not take off.Low helicopter battery, damaged blades, throttle not advanced enough.Charge helicopter battery. Check and replace damaged blades. Slowly increase throttle.
ટૂંકી ફ્લાઇટ સમય.બેટરી સંપૂર્ણપણે ચાર્જ થઈ નથી, બેટરી જૂની થઈ ગઈ છે.Ensure battery is fully charged. Consider replacing the battery if it's old or damaged.

વિશિષ્ટતાઓ

Diagram showing the dimensions of the ESKY 150 EC helicopter: 186mm length, 44mm width, 59mm height.

Image: ESKY 150 EC Helicopter dimensions.

સલામતી માર્ગદર્શિકા

Please read and adhere to these safety guidelines to prevent injury or damage.

વોરંટી અને આધાર

Information regarding product warranty and customer support contact details is not available in the provided product data. Please refer to the product packaging or the seller's webચોક્કસ વોરંટી શરતો અને સપોર્ટ વિકલ્પો માટે સાઇટ.

સત્તાવાર ઉત્પાદન વિડિઓઝ

No official product videos from the seller were provided in the product data.

સંબંધિત દસ્તાવેજો - 150 ઇસી

પ્રિview ESKY EYAS II મીની આરસી એરક્રાફ્ટ યુઝર મેન્યુઅલ
ESKY EYAS II મીની RC એરક્રાફ્ટ માટે વ્યાપક વપરાશકર્તા માર્ગદર્શિકા, જેમાં સ્પષ્ટીકરણો, એસેમ્બલી, પ્રી-ફ્લાઇટ તપાસ, ઉડાન, મુશ્કેલીનિવારણ અને ટ્રાન્સમીટર વિગતો આવરી લેવામાં આવી છે.
પ્રિview એસ્કી HN-28 સોલર હેન્ડ ક્રેન્ક રેડિયો યુઝર મેન્યુઅલ - ફ્લેશલાઇટ સાથે ઇમરજન્સી વેધર રેડિયો
એસ્કી HN-28 સોલર હેન્ડ ક્રેન્ક રેડિયો માટે વ્યાપક વપરાશકર્તા માર્ગદર્શિકા. ફ્લેશલાઇટ અને પાવર બેંક ક્ષમતાઓ સાથે આ બહુમુખી કટોકટી હવામાન રેડિયો માટે તેની સુવિધાઓ, સંચાલન, ચાર્જિંગ પદ્ધતિઓ (USB, સોલર, હેન્ડ ક્રેન્ક) અને જાળવણી વિશે જાણો.
પ્રિview Esky KF06A કી ફાઇન્ડર વપરાશકર્તા માર્ગદર્શિકા અને સૂચનાઓ
વાયરલેસ આઇટમ લોકેટર સિસ્ટમ, Esky KF06A કી ફાઇન્ડર માટે વપરાશકર્તા માર્ગદર્શિકા. આ માર્ગદર્શિકામાં ડિવાઇસને કેવી રીતે સેટ કરવું અને ઓપરેટ કરવું તેની વિગતો આપવામાં આવી છે, જેમાં ટ્રાન્સમીટર અને રીસીવર માટે બેટરી ઇન્સ્ટોલેશન, સ્પષ્ટીકરણો અને FCC પાલન માહિતીનો સમાવેશ થાય છે. આ ઉપયોગમાં સરળ RF લોકેટર વડે ખોવાયેલી ચાવીઓ, રિમોટ અને અન્ય વસ્તુઓ શોધો.
પ્રિview એસ્કી રિમોટ કી ફાઇન્ડર ES-KF02 સૂચનાઓ
એસ્કી રિમોટ કી ફાઇન્ડર (મોડેલ: ES-KF02) માટે વપરાશકર્તા માર્ગદર્શિકા, તેનો પરિચય, ઉત્પાદન આકૃતિઓ, ટ્રાન્સમીટર અને રીસીવર બંને માટે બેટરી ઇન્સ્ટોલેશન, ઓપરેશન સૂચનાઓ, સ્પષ્ટીકરણો અને FCC સ્ટેટમેન્ટની વિગતો આપે છે.
પ્રિview બેટલ સ્ટોરેજ બોક્સ યુઝર મેન્યુઅલ અને ગાયરો એસેમ્બલી ગાઇડ
બેટલ ટોપ સ્ટોરેજ બોક્સ માટે યુઝર મેન્યુઅલ અને એસેમ્બલી સૂચનાઓ, જેમાં મોડેલ નંબરો અને વર્ણનો સાથે વિવિધ ગાયરો એસેસરીઝના એસેમ્બલી અને ઉપયોગની વિગતો આપવામાં આવી છે.
પ્રિview AXIS Q1809-LE બુલેટ કેમેરા 150 mm ઇન્સ્ટોલેશન માર્ગદર્શિકા
AXIS Q1809-LE બુલેટ કેમેરા 150 mm માટે વિગતવાર ઇન્સ્ટોલેશન માર્ગદર્શિકા. સલામતી માહિતી, કાનૂની વિચારણાઓ, નિયમનકારી પાલન અને આકૃતિઓના ટેક્સ્ટ્યુઅલ વર્ણન સાથે પગલું-દર-પગલાં ઇન્સ્ટોલેશન સૂચનાઓ આવરી લે છે.