1. પરિચય
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Kanto TE300 Advanced Extend and Tilting TV Wall Mount. The TE300 is designed to securely mount flat-panel televisions ranging from 43 to 90 inches and supporting up to 150 lbs. Its design allows for easy access to TV inputs and offers enhanced viewing flexibility through tilt and swivel adjustments.
2. ઉત્પાદન સુવિધાઓ
- Easy Input Access: Extends up to 6 inches from the wall, providing convenient access to cables and ports at the rear of your television.
- ઉન્નત દૃશ્યતા: Allows for panning your TV up to 8 degrees left or right, and tilting forward 12 degrees or backward 2 degrees for optimal viewing angles and glare reduction.
- સરળ સ્થાપન: Designed for straightforward setup with clear instructions and a comprehensive hardware kit.
- પરફેક્ટ પ્લેસમેન્ટ: Features oversized TV brackets for vertical adjustment and a wide, open-frame wall plate for horizontal adjustment and cable routing. Post-installation leveling is included.
- Superior Mounting Experience: Includes a highly organized hardware kit, drill template, and dust catcher for a hassle-free installation process.
3. પેકેજ સામગ્રી
Verify that all components are present before beginning installation. Refer to the included hardware kit for specific screw sizes and quantities.
Image: Kanto TE300 TV Wall Mount components laid out.
- વોલ પ્લેટ એસેમ્બલી
- ટીવી કૌંસ (2)
- Hardware Kit (various screws, washers, spacers, wall anchors)
- Drill Template with Dust Catcher
- Small Level Tool
- સૂચના માર્ગદર્શિકા
4. સલામતી માહિતી
WARNING: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, contact Kanto customer support or a qualified professional installer.
- વજન ક્ષમતા: Do not exceed the maximum weight capacity of 150 lbs (68 kg). This mount is intended for use only with the maximum weights indicated.
- ટીવીનું કદ: Ensure your TV size is between 43 and 90 inches.
- દિવાલનો પ્રકાર: આ માઉન્ટ લાકડાના સ્ટડ દિવાલો અથવા નક્કર કોંક્રિટ/ઈંટની દિવાલો પર ઇન્સ્ટોલેશન માટે રચાયેલ છે. ફક્ત ડ્રાયવૉલ પર ઇન્સ્ટોલ કરશો નહીં.
- સાધનો: Use appropriate tools for installation. A stud finder is highly recommended.
- સહાય: Due to the size and weight of the TV and mount, a minimum of two people are required for safe installation.
- કેબલ મેનેજમેન્ટ: Ensure all cables are routed safely and do not interfere with the mount's movement.
5. સ્થાપન માર્ગદર્શિકા
Follow these steps carefully for a secure installation. It is recommended to have a second person assist with lifting and positioning the TV.
પગલું 1: તમારા ટીવી સાથે ટીવી કૌંસ જોડો
- Carefully place your TV face down on a soft, clean surface to prevent damage.
- તમારા ટીવીની પાછળના ભાગમાં VESA માઉન્ટ કરવાના છિદ્રોને ઓળખો.
- Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern. Refer to your TV's manual for specific requirements.
- Attach the two TV brackets to the back of your TV using the selected hardware. Ensure the brackets are oriented correctly (hooks facing upwards) and are securely tightened.
Image: Diagram showing VESA mounting patterns and weight capacity (up to 150 lbs).
પગલું 2: વોલ પ્લેટ ઇન્સ્ટોલ કરો
- Determine the desired height and location for your TV. Use a stud finder to locate two adjacent wood studs or mark the drilling points on a solid concrete/brick wall.
- Use the provided drill template to mark the pilot hole locations on the wall. Ensure the template is level using the small level tool.
- Drill pilot holes at the marked locations. For wood studs, use a 1/8 inch (3 mm) drill bit. For concrete/brick, use a 3/8 inch (10 mm) masonry drill bit and insert the concrete anchors.
- Position the wall plate over the pilot holes and secure it to the wall using the lag bolts and washers. Tighten all bolts firmly, but do not overtighten.
Image: Illustration of the open wall plate design, allowing for mounting over electrical outlets and lateral shift for perfect TV placement.
પગલું 3: તમારું ટીવી અટકી દો
- With assistance, carefully lift the TV and hook the attached TV brackets onto the top edge of the wall plate.
- Gently lower the TV until the brackets fully engage with the wall plate. The TV should sit securely.
- Locate the safety screws or locking mechanisms on the bottom of the TV brackets. Tighten these to secure the TV to the wall plate and prevent accidental dislodging.
- Perform any post-installation leveling using the horizontal leveling screws on the TV brackets to ensure your screen is perfectly aligned.
Image: Diagram illustrating the 6-inch extension from the wall, horizontal leveling screws, and the slim 2.4-inch profile when pushed back.
6. ઓપરેટિંગ સૂચનાઓ
The Kanto TE300 mount offers flexible viewing વિકલ્પો:
એડજસ્ટિંગ ટિલ્ટ
- To adjust the vertical tilt (up to +12° forward or -2° backward), loosen the tilt adjustment knobs located on the TV brackets.
- ટીવીને તમારા ઇચ્છિત ખૂણા પર કાળજીપૂર્વક નમાવો.
- ટીવીને સ્થાને સુરક્ષિત કરવા માટે ટિલ્ટ એડજસ્ટમેન્ટ નોબ્સને કડક કરો.
Adjusting Swivel/Pan
- The mount allows for panning your TV up to 8 degrees left or right.
- Gently push or pull the side of the TV to achieve the desired horizontal viewકોણ કોણ.
Image: Visual representation of the tilt mechanism (+12°/-2° viewing angle) and up to 8° swivel in either direction for optimal viewing
દિવાલથી વિસ્તરણ
- The mount extends up to 6 inches from the wall, providing space to access cables.
- To push the TV closer to the wall, gently guide it back until it sits at its minimum distance of 2.4 inches.
7. જાળવણી
- Periodically check that all screws and connections are secure. Retighten if necessary.
- Clean the mount with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Ensure that the TV's weight has not shifted or that the wall structure has not been compromised over time.
8. મુશ્કેલીનિવારણ
- ટીવી લેવલ નથી: Use the horizontal leveling screws on the TV brackets to make fine adjustments. Ensure the wall plate was installed level initially.
- ઝુકાવને સમાયોજિત કરવામાં મુશ્કેલી: Loosen the tilt adjustment knobs slightly before attempting to tilt the TV. Retighten once the desired angle is achieved.
- માઉન્ટ અસ્થિર લાગે છે: Immediately remove the TV from the mount. Recheck all installation steps, especially ensuring the wall plate is securely fastened to studs or concrete with appropriate anchors. Verify the TV's weight does not exceed the mount's capacity.
- ખૂટતા ભાગો: Contact Kanto customer support for assistance.
9. સ્પષ્ટીકરણો
| લક્ષણ | સ્પષ્ટીકરણ |
|---|---|
| બ્રાન્ડ | કાન્તો |
| મોડલ નંબર | TE300 |
| ટીવી કદ સુસંગતતા | ૪૨" - ૩૦૦" |
| મહત્તમ વજન ક્ષમતા | 150 lbs (68 કિગ્રા) |
| ચળવળનો પ્રકાર | ટિલ્ટ, સ્વિવલ, એક્સટેન્ડ |
| મહત્તમ નમવું કોણ | +12° / -2° |
| Swivel/Pan Angle | Up to 8° Left or Right |
| દિવાલથી વિસ્તરણ | ૪.૫" (ઓછામાં ઓછા) થી ૨૦" (મહત્તમ) |
| સામગ્રી | ધાતુ |
| ઉત્પાદન પરિમાણો | 6 x 27 x 18.9 ઇંચ |
| વસ્તુનું વજન | 14 પાઉન્ડ |
10. વોરંટી અને સપોર્ટ
Kanto stands behind its products. For warranty information, technical support, or to report missing/damaged parts, please refer to the contact information provided in your product packaging or visit the official Kanto webસાઇટ. વોરંટી દાવાઓ માટે ખરીદીના પુરાવા તરીકે તમારી ખરીદી રસીદ રાખો.
