PRAMAC S8000 થ્રી-ફેઝ DPP AVR જનરેટર વપરાશકર્તા માર્ગદર્શિકા

1. પરિચય

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your PRAMAC S8000 Three-Phase DPP AVR Generator. Please read this manual thoroughly before operating the generator to ensure proper use and to prevent injury or damage.

The PRAMAC S8000 is a versatile single-phase/three-phase generator, delivering up to 6.6 kW of power. It features a reliable Honda gasoline engine (GX.390) and an AVR (Automatic Voltage Regulator) system for stable power output, making it suitable for various outdoor applications, including small construction sites and artisanal work.

2. સલામતી માહિતી

જનરેટર ચલાવતી વખતે હંમેશા સલામતીને પ્રાથમિકતા આપો. સલામતી સૂચનાઓનું પાલન કરવામાં નિષ્ફળતા ગંભીર ઈજા અથવા મૃત્યુનું કારણ બની શકે છે.

• કાર્બન મોનોક્સાઇડ સંકટ: Never operate the generator indoors or in enclosed spaces. Generators produce carbon monoxide, a colorless, odorless, poisonous gas.
• વિદ્યુત આંચકો સંકટ: Do not operate the generator in wet conditions. Ensure all connections are secure and properly grounded.
• આગનું જોખમ: Fuel is highly flammable. Refuel in a well-ventilated area with the engine off and cool. Do not smoke near the generator.
• ગરમ સપાટીઓ: The engine and muffler become very hot during operation. Avoid contact to prevent burns.
• રક્ષણ: The generator is equipped with built-in safety features including thermal protections, differential protection, a waterproof switch cover, a 10A fuse (12V DC), and an Oil Guard (low oil level shutdown). Do not bypass these safety features.
• જનરેટર ચલાવતી વખતે બાળકો અને પાલતુ પ્રાણીઓને તેનાથી દૂર રાખો.
• યોગ્ય વ્યક્તિગત રક્ષણાત્મક ઉપકરણો (PPE) જેમ કે મોજા અને આંખનું રક્ષણ પહેરો.

3. ઘટકો અને નિયંત્રણો

આકૃતિ 3.1: ઓવરview of the PRAMAC S8000 Generator. This image shows the generator's robust frame, the yellow side panel with the PRAMAC logo, the black fuel tank on top, and the control panel on the left side with various sockets and switches. The red engine component is visible below the control panel, and a wheel is visible on the right side.

3.1 નિયંત્રણ પેનલ

The control panel provides access to all necessary operational controls and indicators.

• પ્રારંભ કી: Positions for OFF - ON - START.
• Air Control Button: Used for managing air intake during starting.
• કનેક્ટર: Provision for remote control accessories (AMF automatic frame, RSS radio remote control).
• સાધનો:
  • Voltmeter: Displays output voltage.
  • Frequency Meter: Displays output frequency (50 Hz).
  • Hour Meter: Tracks total operating hours.
  • Fuel Level Indicator: Shows the current fuel level.
• રક્ષણ:
  • થર્મલ પ્રોટેક્શન્સ
  • વિભેદક સંરક્ષણ
  • Waterproof Switch Cover
  • Fuse 10 A (12 V DC)
  • Oil Guard (low oil level shutdown)

3.2 Sockets and Outputs

• N.1 Schuko 230 V 16 A IP54
• N.1 2P+T CEE 230V 16A IP44
• N.1 3P+N+T CEE 400V 16A IP44
• 12 V DC Battery Charger Output

4. સેટઅપ

1. અનપેકીંગ: Carefully remove the generator from its packaging. Inspect for any shipping damage.
2. પ્લેસમેન્ટ: Place the generator on a firm, level surface in a well-ventilated outdoor area, away from windows, doors, and vents. Ensure at least 1 meter of clear space around the generator.
3. એન્જિન તેલ ઉમેરો: Before first use, fill the engine crankcase with the recommended type and amount of engine oil. Refer to the engine manual for specific oil requirements. The Oil Guard system will prevent the engine from starting if oil is too low.
4. બળતણ ઉમેરો: Fill the fuel tank with fresh, unleaded gasoline. Do not overfill. Ensure the fuel cap is securely tightened.
5. ગ્રાઉન્ડિંગ: Properly ground the generator according to local electrical codes.

5. ઓપરેટિંગ સૂચનાઓ

૫.૨ જનરેટર શરૂ કરવું

The PRAMAC S8000 supports both electric start and manual recoil start.

ઇલેક્ટ્રિક સ્ટાર્ટ:

1. Ensure all electrical loads are disconnected from the generator.
2. Turn the start key to the "ON" position.
3. If the engine is cold, engage the choke (if applicable, refer to engine manual).
4. Turn the start key to the "START" position and hold until the engine starts. Release the key once the engine runs.
5. Once the engine is running smoothly, disengage the choke.

Manual Recoil Start:

1. Ensure all electrical loads are disconnected from the generator.
2. Turn the start key to the "ON" position.
3. If the engine is cold, engage the choke.
4. Grasp the recoil starter handle firmly and pull it slowly until you feel resistance, then pull quickly and smoothly to start the engine.
5. Repeat if necessary. Once the engine is running smoothly, disengage the choke.

૪.૨ ઇલેક્ટ્રિકલ લોડ્સને જોડવા

Once the generator is running and stable, you can connect your electrical devices. Ensure the total load does not exceed the generator's continuous operating power (5.6 kW for three-phase, 2.96 kW for single-phase).

• Connect appliances one at a time, starting with the largest load.
• Monitor the voltmeter and frequency meter to ensure stable output.

૫.૩ જનરેટર બંધ કરવું

1. જનરેટરમાંથી તમામ વિદ્યુત લોડને ડિસ્કનેક્ટ કરો.
2. જનરેટરને ઠંડુ થવા માટે લોડ કર્યા વિના થોડી મિનિટો સુધી ચાલવા દો.
3. Turn the start key to the "OFF" position.
4. Turn off the fuel valve (if applicable, refer to engine manual).

6. જાળવણી

Regular maintenance is crucial for the longevity and reliable operation of your generator. Refer to the engine manufacturer's manual for detailed maintenance schedules.

• એન્જિન તેલ: Check oil level before each use. Change oil regularly as per engine manual recommendations.
• એર ફિલ્ટર: એર ફિલ્ટર નિયમિતપણે તપાસો અને સાફ કરો. જો નુકસાન થયું હોય તો તેને બદલો.
• સ્પાર્ક પ્લગ: Inspect and clean the spark plug periodically. Replace if worn.
• ઇંધણ સિસ્ટમ: Use fresh fuel. For long-term storage, drain the fuel tank and carburetor, or use a fuel stabilizer.
• સફાઈ: Keep the generator clean and free of debris. Do not use water to clean the electrical components.
• સંગ્રહ: Store the generator in a clean, dry place.

7. મુશ્કેલીનિવારણ

For problems not listed or if solutions do not resolve the issue, contact a qualified service technician.

8. સ્પષ્ટીકરણો

9. વોરંટી અને સપોર્ટ

Specific warranty information for the PRAMAC S8000 generator is not provided in this manual. For details regarding warranty coverage, terms, and conditions, please refer to the documentation included with your purchase or contact the manufacturer, PRAMAC, or your authorized dealer.

For technical support, spare parts, or service inquiries, please contact the seller or an authorized PRAMAC service center. Always provide your model number (S8000 / PD652TH2Z05) and serial number when seeking support.