BWT કોસ્મી ધ બોટ 250 રોબોટિક પૂલ ક્લીનર સૂચના માર્ગદર્શિકા

1. પરિચય

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your BWT Cosmy The Bot 250 Robotic Pool Cleaner. Please read this manual thoroughly before using the product and retain it for future reference.

The BWT Cosmy The Bot 250 is designed for effective pool cleaning, featuring powerful suction and efficient navigation. Its design facilitates easy handling, and the adjustable suction power allows for adaptation to various debris types.

Image 1.1: The BWT Cosmy The Bot 250 Robotic Pool Cleaner, shown with a smartphone displaying its remote control application.

2. સલામતી માહિતી

ઈજા અથવા નુકસાનનું જોખમ ઘટાડવા માટે હંમેશા નીચેની સલામતી સાવચેતીઓનું પાલન કરો:

• Ensure the power supply is disconnected before performing any maintenance or cleaning on the unit.
• Do not operate the cleaner if the power cable is damaged. Contact qualified service personnel for repair.
• Keep children and pets away from the pool area when the cleaner is in operation.
• Only use the cleaner in water temperatures between 10°C (50°F) and 35°C (95°F).
• Do not use the cleaner if there are people in the pool.
• Ensure the cleaner is fully submerged before starting operation.
• Avoid lifting the cleaner by its cable. Always use the handle provided.

3. ઉત્પાદન ઘટકો

The BWT Cosmy The Bot 250 Robotic Pool Cleaner consists of the following main components:

• મુખ્ય એકમ: The robotic cleaner body, housing the motor and filtration system.
• ફિલ્ટર બાસ્કેટ: Removable basket for collecting debris.
• Brushes/Rollers: Located on the underside for scrubbing pool surfaces.
• Floating Cable: Connects the cleaner to the power supply unit.
• પાવર સપ્લાય યુનિટ: Converts AC power to safe DC power for the cleaner.

છબી 3.1: આગળ view of the cleaner, highlighting the cleaning brushes and intake area.

છબી 3.2: અંડરસાઇડ view of the cleaner, illustrating the tracks and brush system for pool surface navigation and cleaning.

છબી 3.3: આંતરિક view of the cleaner, showing the gear and motor components responsible for its movement and cleaning action.

4. સેટઅપ

1. ક્લીનર ખોલો: Carefully remove the cleaner and all accessories from the packaging.
2. Connect the Floating Cable: Connect the floating cable to the power supply unit. Ensure the connection is secure.
3. Place in Pool: Gently lower the cleaner into the pool. Allow it to sink to the bottom. Ensure there are no air bubbles trapped inside the unit.
4. પાવર સપ્લાયની સ્થિતિ: Place the power supply unit at least 3.5 meters (11.5 feet) from the edge of the pool, ensuring it is not exposed to direct sunlight or excessive moisture.
5. પ્લગ ઇન: પાવર સપ્લાય યુનિટને ગ્રાઉન્ડેડ ઇલેક્ટ્રિકલ આઉટલેટમાં પ્લગ કરો.

5. ઓપરેટિંગ સૂચનાઓ

1. સફાઈ ચક્ર શરૂ કરો: Press the power button on the power supply unit or use the remote control application (if applicable) to start the cleaning cycle. The cleaner will begin its programmed cleaning routine.
2. સક્શન પાવર એડજસ્ટ કરો: The Cosmy The Bot 250 features adjustable intake valves. To increase or decrease suction power, manually adjust the height of the intake valves located on the underside of the unit. This allows for optimized debris collection.
3. મોનિટર સફાઈ: The cleaner will navigate the pool floor and walls (depending on model features) to collect debris. Cleaning cycles are designed to be efficient and consume less energy.
4. End Cleaning Cycle: Once the cleaning cycle is complete, or if you wish to stop it manually, press the power button again.
5. પૂલમાંથી દૂર કરો: Carefully pull the cleaner out of the water using its handle. Do not pull by the floating cable. Allow excess water to drain before placing it on a flat surface.

6. જાળવણી

Regular maintenance ensures optimal performance and extends the lifespan of your robotic pool cleaner.

૬.૧. ફિલ્ટર બાસ્કેટ સાફ કરવી

An indicator light will illuminate when the filter basket is full and requires cleaning.

1. પાવર ડિસ્કનેક્ટ કરો: Always unplug the power supply unit from the electrical outlet before cleaning.
2. ફિલ્ટર કમ્પાર્ટમેન્ટ ખોલો: Locate the filter access button/latch on the top of the cleaner and open the lid.
3. ફિલ્ટર બાસ્કેટ દૂર કરો: Grasp the handle of the filter basket and lift it out of the cleaner.
4. ફિલ્ટરને ધોઈ નાખો: Use a garden hose to thoroughly rinse the filter basket, removing all trapped debris. Ensure all mesh surfaces are clear.
5. Reinsert Filter: Place the clean filter basket back into the cleaner, ensuring it is properly seated.
6. ઢાંકણ બંધ કરો: Close the filter compartment lid securely.

છબી ૧.૧: ટોચ view of the cleaner with the filter compartment open, showing the filter basket inside.

Image 6.2: The filter basket removed from the cleaner, ready for rinsing.

૩. સામાન્ય સફાઈ અને સંગ્રહ

• After each use, rinse the cleaner with fresh water to remove any pool chemicals or debris.
• Inspect the brushes and tracks for any tangled debris (hair, leaves, etc.) and remove them.
• Store the cleaner in a cool, dry place, away from direct sunlight and extreme temperatures.
• Coil the floating cable loosely to prevent kinks or damage.

7. મુશ્કેલીનિવારણ

If you encounter issues with your BWT Cosmy The Bot 250, refer to the following common problems and solutions:

જો આ ઉકેલો અજમાવવા પછી પણ સમસ્યા ચાલુ રહે, તો કૃપા કરીને ગ્રાહક સપોર્ટનો સંપર્ક કરો.

8. સ્પષ્ટીકરણો

9. વોરંટી અને સપોર્ટ

For warranty information and customer support, please refer to the documentation included with your purchase or contact the manufacturer directly:

ઉત્પાદક: STEWARD GROUP, LLC

Please have your model number (Cosmy The Bot 250, RURN-NOYO-S2M70) and purchase date available when contacting support.