1. પરિચય
The FLYINGVOICE FTA5102E2 is a high-performance Analog Telephone Adapter (ATA) designed to facilitate the transition from traditional analog telephony to Voice over IP (VoIP) for small to medium businesses (SMBs). This device offers robust features for reliable and cost-effective communication.

Figure 1: FLYINGVOICE FTA5102E2 Analog Telephone Adapter. This image shows the top-front view of the black adapter with green indicator lights for FXS1, FXS2, WAN, LAN1, LAN2, and PWR.
મુખ્ય લાક્ષણિકતાઓમાં શામેલ છે:
- Cost-Effective VoIP Solution: Supports dual SIP lines, T.38, T.30, and G.711 fax standards, reducing communication expenses.
- ઉન્નત પ્રદર્શન: Features a 38% faster processing CPU and double the flash memory for improved stability and advanced VoIP functionalities.
- Simple Deployment: Operates as a stand-alone device, requiring no PC for internal calls, ensuring straightforward setup and integration.
- વ્યાપક સુસંગતતા: Supports SIP V2 protocol, ensuring compatibility with most VoIP service providers.
- લવચીક કનેક્ટિવિટી: Equipped with 2 FXS ports for analog phones/fax machines and 2 LAN ports for network devices.
Video 1: Introduction to the FLYINGVOICE FTA5102E2 High-performance 2 FXS VoIP Adapter. This video provides an overview of the adapter's features and capabilities.
2. પેકેજ સામગ્રી
ખાતરી કરો કે બધી વસ્તુઓ તમારા પેકેજમાં હાજર છે:
- 1x FLYINGVOICE FTA5102E2 Analog Telephone Adapter
- 2x RJ11 Cables
- 1x ઝડપી સ્થાપન માર્ગદર્શિકા
- 1x પાવર એડેપ્ટર
- 1x આરજે 45 ઇથરનેટ કેબલ

Figure 2: Contents of the FTA5102E2 package. This image displays the FTA5102E2 adapter along with two RJ11 cables, a quick installation guide, a power adapter, and an RJ45 Ethernet cable.
3. સેટઅપ અને ઇન્સ્ટોલેશન
Follow these steps to set up your FTA5102E2 adapter:
- નેટવર્કથી કનેક્ટ કરો:
Connect one end of the provided RJ45 Ethernet cable to the WAN port (blue) on the back of the FTA5102E2 and the other end to your router or modem's LAN port.

આકૃતિ 3: પાછળ view of the FTA5102E2 showing the FXS, WAN, LAN, RST, and DC ports. The WAN port is highlighted in blue.
- Connect Analog Devices:
Connect your analog phone(s) or fax machine(s) to the FXS1 and/or FXS2 ports (black) on the back of the FTA5102E2 using the RJ11 cables.

આકૃતિ 4: પાછળ view of the FTA5102E2 showing the FXS ports. These ports are used to connect analog phones, fax machines, or POS machines.
- LAN ઉપકરણોને કનેક્ટ કરો (વૈકલ્પિક):
If needed, connect additional network devices like computers or printers to the LAN1 and LAN2 ports (yellow) using Ethernet cables.

આકૃતિ 5: પાછળ view of the FTA5102E2 highlighting the LAN ports. These ports can be used to connect devices such as computers, printers, or IPTVs.
- પાવર ચાલુ:
Connect the power adapter to the DC 12V/1A port on the back of the FTA5102E2 and then plug it into a power outlet. The PWR indicator light on the front panel will illuminate.
મહત્વપૂર્ણ નોંધ:
The FTA5102E2 is compatible with most VoIP service providers. However, it is NOT compatible with AT&T, Verizon, Magic Jack, Ooma, or Google Voice. Please verify compatibility with your service provider if they are not listed.
4. ઓપરેટિંગ સૂચનાઓ
4.1 કૉલ્સ કરવા અને પ્રાપ્ત કરવા
Once the adapter is successfully configured with your VoIP service provider, you can use your connected analog phone as usual:
- કૉલ કરવા માટે: Pick up the handset, wait for the dial tone, and dial the desired phone number.
- કૉલ પ્રાપ્ત કરવા માટે: The phone will ring. Pick up the handset to answer.
4.2 Three-Way Conference
The FTA5102E2 supports 3-way conference calls. Consult your VoIP service provider's specific instructions for initiating a three-way conference, as the exact dialing sequence may vary.

Figure 6: Illustration of a three-way audio conference call, demonstrating the adapter's capability to support multiple participants.
4.3 Fax Over IP (FoIP)
The FTA5102E2 supports T.38, T.30, and G.711 fax standards, allowing you to send and receive faxes over your VoIP connection using a connected fax machine.

Figure 7: Visual representation of the adapter supporting T.38 and T.30 fax protocols, indicating its compatibility with fax machines for reliable fax over IP.
5. જાળવણી
To ensure optimal performance and longevity of your FTA5102E2 adapter:
- Keep the device in a cool, dry place, away from direct sunlight and excessive heat.
- Avoid exposing the device to water or high humidity.
- નરમ, સૂકા કપડાથી બાહ્ય ભાગ સાફ કરો. પ્રવાહી ક્લીનર્સ અથવા એરોસોલ્સનો ઉપયોગ કરશો નહીં.
- Ensure proper ventilation by not blocking the vents on the device.
- Periodically check for firmware updates from the FLYINGVOICE webનવીનતમ સુવિધાઓ અને સુરક્ષા પેચો સુનિશ્ચિત કરવા માટે સાઇટ.
5.1 રીમોટ મેનેજમેન્ટ
The FTA5102E2 supports advanced management protocols such as TR-069 and SNMP, allowing for unified deployment and centralized management by network administrators.

Figure 8: Depiction of easy management capabilities, showing a desktop and laptop with "TR-069" and "SNMP" displayed, indicating support for these remote management protocols.
6. મુશ્કેલીનિવારણ
If you encounter issues with your FTA5102E2, refer to the following common problems and solutions:
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| No dial tone on analog phone. |
|
|
| કૉલ કરી કે પ્રાપ્ત કરી શકતા નથી. |
|
|
| Poor call quality (choppy audio, echo). |
|
|
If the issue persists, please refer to the official FLYINGVOICE support resources or contact your VoIP service provider.
7. સ્પષ્ટીકરણો
| લક્ષણ | વિગત |
|---|---|
| મોડલ નંબર | FTA5102E2 |
| FXS પોર્ટ્સ | 2 |
| SIP Lines | 2 |
| ઇથરનેટ પોર્ટ્સ | 1x WAN, 2x LAN (10/100 Mbps) |
| ફેક્સ આધાર | T.38, T.30, G.711 |
| કોન્ફરન્સ કૉલ | 3-માર્ગ |
| Management Protocols | TR-069, SNMP |
| પરિમાણો (L x W x H) | 4.72 x 3.15 x 1.26 ઇંચ |
| વજન | 14.4 ઔંસ |
| રંગ | કાળો |
| પાવર ઇનપુટ | DC 12V/1A |
8. વોરંટી અને સપોર્ટ
For warranty information and technical support, please refer to the official FLYINGVOICE webસાઇટ પર જાઓ અથવા તેમની ગ્રાહક સેવાનો સંપર્ક કરો. વોરંટી દાવાઓ માટે તમારી ખરીદી રસીદ રાખો.
You can also find additional resources and a PDF user guide at the following link:





