પરિચય
Thank you for choosing the ErGear Dual Monitor Desk Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new monitor mount. Please read this manual thoroughly before installation and keep it for future reference.
મહત્વપૂર્ણ સલામતી માહિતી
Please ensure all instructions are read and understood before assembly and use. If you have any questions, please contact customer service. Failure to follow these instructions may result in property damage, serious injury, or death.
- Verify that your monitor's weight and VESA pattern are within the specified limits.
- Do not exceed the maximum load capacity of 26.5 lbs per arm.
- Ensure the mounting surface (desk) is strong enough to support the combined weight of the mount and monitors.
- Use only the provided hardware.
- નાના ભાગોને બાળકોથી દૂર રાખો.
વિશિષ્ટતાઓ
- મોડલ: EGCM13B
- સ્ક્રીન માપ સુસંગતતા: 13 થી 34 ઇંચ
- Weight Capacity (per arm): 26.5 lbs સુધી
- VESA સુસંગતતા: 75x75 mm, 100x100 mm
- Arm Span: 33 ઇંચ
- ધ્રુવ ઊંચાઈ: 16.3 ઇંચ
- ચળવળનો પ્રકાર: Tilt, Swivel, Rotation, Articulating
- મહત્તમ નમવું કોણ: 90 ડિગ્રી
- સામગ્રી: એલોય સ્ટીલ
- રંગ: કાળો
- માઉન્ટ કરવાનો પ્રકાર: ટેબલટોપ માઉન્ટ (C-Cl)amp અથવા ગ્રોમેટ)
- C-Clamp ડેસ્કની જાડાઈ: ૪૨" - ૩૦૦"
- Grommet Mount Desk Thickness: ૪૨" - ૩૦૦"
- ગ્રોમેટ હોલ વ્યાસ: ૪૨" - ૩૦૦"
પેકેજ સામગ્રી
Please check that all parts are included and undamaged. If any parts are missing or damaged, please contact customer service.
- ડેસ્ક Cl સાથે મુખ્ય ધ્રુવamp/ગ્રોમેટ બેઝ
- ડ્યુઅલ મોનિટર આર્મ્સ
- VESA Plates (2x)
- Mounting Hardware (screws, washers, tools)
- કેબલ મેનેજમેન્ટ ક્લિપ્સ
- સૂચના માર્ગદર્શિકા
સેટઅપ અને ઇન્સ્ટોલેશન
1. Desk Compatibility Check
Before installation, ensure your desk meets the following criteria:
- સામગ્રી: Recommended for wooden tables.
- અન્ડરસાઇડ: Preferably free of beams or panels that may interfere with installation.
- C-Clamp જાડાઈ: ૪૨" - ૩૦૦"
- Grommet Mount Thickness: 0.39" - 2.17" (Hole Diameter: 0.47" - 0.79")
2. Monitor Compatibility Check
Each monitor must meet these conditions:
- સ્ક્રીનનું કદ: 13 થી 34 ઇંચ
- વજન: 26.5 lbs સુધી
- VESA માઉન્ટિંગ હોલ્સ: 75x75 mm or 100x100 mm apart on the back of the monitor.
3. Assemble the Pole with Clamp આધાર
Choose either C-Clamp or Grommet installation based on your desk type.
Follow the detailed steps in the provided video and diagrams to securely attach the main pole to your desk using either the C-Clamp or Grommet method. Ensure all screws are tightened appropriately for stability.
4. Assemble the Arm and Pole Wire Clips
Attach the monitor arms to the main pole. Loosen the screw on the pipe clamp before installing the arm, then tighten it securely. Ensure the VESA plate side of the arm faces upwards. Install the cable management clips along the arms and pole.
5. Assemble VESA Plate and Monitor
Attach the VESA plate to the back of your monitor using the appropriate screws and washers. Ensure it is securely fastened.
6. Install the Monitor to the Swivel Arm
Carefully slide the monitor (with the attached VESA plate) onto the swivel arm. Secure it by tightening the locking screw. Adjust the screw with the Allen key to adjust the height of the VESA panel as needed (clockwise to lower, counter-clockwise to raise).
સંચાલન અને ગોઠવણો
The ErGear Dual Monitor Desk Mount offers versatile adjustments for optimal viewઆરામ:
- ઊંચાઈ ગોઠવણ: cl ઢીલું કરોamp on the main pole to slide the arms up or down to your desired height. Re-tighten the clamp સુરક્ષિત રીતે.
- નમવું: Adjust the monitor's vertical angle by tilting it +/-45 degrees to reduce glare and eye strain.
- સ્વીવેલ: Rotate the monitor horizontally +/-90 degrees for easy screen sharing or viewવિવિધ ખૂણાઓથી
- પરિભ્રમણ: લેન્ડસ્કેપ અને પોટ્રેટ ઓરિએન્ટેશન વચ્ચે સ્વિચ કરવા માટે મોનિટરને 360 ડિગ્રી ફેરવો.
- હાથનું વિસ્તરણ/પાછું ખેંચવું: The articulating arms allow you to extend or retract your monitors closer or further from you. Adjust the tension screws on the arm joints as needed to hold the desired position.
જાળવણી
- સમયાંતરે બધા સ્ક્રૂ અને કનેક્શન્સ કડક અને સુરક્ષિત રહે તેની ખાતરી કરવા માટે તપાસો.
- માઉન્ટને સોફ્ટ, ડી વડે સાફ કરોamp કાપડ ઘર્ષક ક્લીનર્સ ટાળો.
- Do not disassemble the mount unless instructed to do so.
મુશ્કેલીનિવારણ
- મોનિટર લેવલ નથી: Ensure the VESA plates are correctly aligned and tightened. Adjust the small bolts on the tilt head to fine-tune alignment.
- Monitors sag or do not hold position: Tighten the tension screws on the arm joints. Refer to the assembly instructions for specific locations.
- માઉન્ટ અસ્થિર લાગે છે: Double-check that the C-Clamp or Grommet mount is securely fastened to the desk and all screws are fully tightened. Ensure your desk meets the thickness requirements.
વોરંટી અને આધાર
For warranty information or technical support, please refer to the product packaging or contact ErGear customer service directly. Keep your purchase receipt as proof of purchase.
