ACEZUK M01 5000A Portable Car Jump Starter User Manual

1. પરિચય

Thank you for choosing the ACEZUK M01 Portable Car Jump Starter. This device is designed to provide emergency jump-starting for 12V vehicles (up to 7.0L gasoline or 5.5L diesel engines) and also functions as a portable power bank and LED flashlight. Please read this manual thoroughly before use to ensure safe and proper operation.

2. સલામતી માહિતી

WARNING: Improper use may result in damage to the device, vehicle, or personal injury. Always follow these safety guidelines.

• Do not attempt to jump start vehicles with engines larger than specified (7.0L gas, 5.5L diesel).
• વાહન શરૂ કરતા પહેલા ખાતરી કરો કે જમ્પ સ્ટાર્ટર ઓછામાં ઓછું 50% ચાર્જ થયેલ છે.
• cl જોડોamps correctly: Red clamp to positive (+) terminal, Black clamp to negative (-) terminal. Reverse polarity can cause damage.
• Remove the jump starter clamps from the vehicle battery within 30 seconds after the engine starts.
• લાલ અને કાળા cl ને જોડશો નહીંampસાથે છે.
• Do not expose the device to extreme temperatures (below -20℃ or above 60℃), direct sunlight, or water.
• બાળકોની પહોંચથી દૂર રાખો.
• If the device becomes excessively hot during use, discontinue operation immediately.

3. પેકેજ સામગ્રી

ખાતરી કરો કે બધી વસ્તુઓ તમારા પેકેજમાં હાજર છે:

• 1 x ACEZUK M01 Jump Starter
• 1 x Smart Jumper Cable with Clamps
• 1 x યુએસબી-સી ચાર્જિંગ કેબલ
• 1 x વપરાશકર્તા માર્ગદર્શિકા
• 1 x સ્ટોરેજ બેગ

Image: Package contents of the ACEZUK M01 Jump Starter.

4. ઉત્પાદન ઓવરview

The ACEZUK M01 is a versatile device featuring multiple functionalities:

• 5000A પીક કરંટ: Capable of jump-starting 12V vehicles with up to 7.0L gas or 5.5L diesel engines.
• 2.5-ઇંચ એલસીડી ડિસ્પ્લે: Shows real-time power level, charging status, and temperature protection indicator.
• Multifunction LED Light: Features three modes: illumination, strobe, and SOS for various emergency situations.
• 12800mAh Power Bank: Equipped with 1 USB output (5V/2.4A) and 1 Type-C input/output (5V/2A, 9V/2A) for charging mobile devices.
• સ્માર્ટ જમ્પર Clamps: Incorporate 8 advanced protection technologies for safe operation.

Image: ACEZUK M01 Jump Starter and accessories.

Image: Labeled diagram of the ACEZUK M01 Jump Starter's components.

5. સેટઅપ અને ચાર્જિંગ

5.1 પ્રારંભિક ચાર્જિંગ

Before first use, fully charge the jump starter. It is recommended to charge the device every 3-6 months to maintain battery health, even if not in use.

• Connect the provided USB-C charging cable to the Type-C input port on the jump starter.
• Connect the other end of the USB-C cable to a 5V/2.4A (or higher) USB wall adapter (not included).
• The LCD display will show the charging progress. The device is fully charged when the display shows 100%.

Image: Charging the ACEZUK M01 Jump Starter.

6. ઓપરેટિંગ સૂચનાઓ

6.1 વાહન શરૂ કરીને જમ્પ કરો

Ensure the jump starter has at least 50% charge before attempting to jump start.

1. Insert Jumper Cable: Plug the smart jumper cable into the EC5 output port on the jump starter. Ensure a secure connection.
2. Cl ને જોડોamps: લાલ (+) cl જોડોamp to the positive terminal of the vehicle's battery. Attach the black (-) clamp to the negative terminal of the vehicle's battery. The smart cable indicator light should turn green, indicating a safe connection.
3. એન્જિન શરૂ કરો: Return to your vehicle and start the engine.
4. Cl દૂર કરોamps: Once the engine starts, immediately remove the clamps from the vehicle battery within 30 seconds. First, remove the black (-) clamp, then the red (+) clamp. Disconnect the smart cable from the jump starter.

Image: Step-by-step guide for jump starting a vehicle.

૫.૨ પાવર બેંક તરીકે ઉપયોગ

The ACEZUK M01 can charge various USB-powered devices.

• Connect your device's charging cable to the USB output port (5V/2.4A) or the Type-C port (5V/2A, 9V/2A) on the jump starter.
• The LCD display will indicate that charging is active.

Image: Using the jump starter to charge mobile devices.

૫.૩ LED ફ્લેશલાઇટનો ઉપયોગ

The integrated LED light has three modes for different situations.

• Press and hold the power button for 3 seconds to turn on the LED light (illumination mode).
• Press the power button once to switch to strobe mode.
• Press the power button again to switch to SOS mode.
• Press and hold the power button for 3 seconds to turn off the LED light.

Image: LED flashlight modes.

7. જાળવણી અને સંગ્રહ

• Clean the device with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
• Store the jump starter in its protective bag in a cool, dry place, away from direct sunlight and moisture.
• Recharge the device every 3-6 months to prevent deep discharge and prolong battery life.
• cl રાખોampસ્વચ્છ અને કાટમુક્ત છે.

8. મુશ્કેલીનિવારણ

9. સ્પષ્ટીકરણો

10. વોરંટી અને સપોર્ટ

ACEZUK provides a 2-year warranty for this product. For any missing parts, technical support, or other issues, please contact ACEZUK customer service via Amazon. Our customer service team is available 24/7 to assist you.