ELECTROPRIME EDA0031087

ELECTROPRIME WiFi Water Sensor & Flood Sensor Instruction Manual

Model: EDA0031087

1. પરિચય

The ELECTROPRIME WiFi Water Sensor & Flood Sensor is a smart device designed to provide early detection of water leaks and floods in your home or office. Upon detecting water, the sensor will emit an audible alarm and send instant notifications to your smartphone via the connected mobile application, helping to prevent potential water damage and protect your property.

ELECTROPRIME WiFi Water Sensor with attached probe

Figure 1: ELECTROPRIME WiFi Water Sensor with its wired water detection probe.

2. ઉત્પાદન સુવિધાઓ

Smart Home Series Water Sensor with 2.4GHz WiFi logo

Figure 2: The water sensor highlighting its 2.4GHz WiFi capability for smart home integration.

3. સ્પષ્ટીકરણો

પરિમાણમૂલ્ય
મોડલEDA0031087
પાવર સપ્લાય2 x AA LR6 1.5V Batteries (not included)
વર્તમાન કામ37mA
જોડી વર્તમાન36mA
સ્ટેન્ડબાય વર્તમાન23.5uA
એલાર્મ અવધિ10 મિનિટ
કાર્યકારી તાપમાન૫°C - ૪૦°C (૪૧°F - ૧૦૪°F)
કાર્યકારી ભેજ૧% - ૯૯% આરએચ
વાયરલેસ પ્રકાર2.4GHz વાઇફાઇ
પ્રોટોકોલIEEE 802.11b/g/n
વાઇફાઇ અંતરખુલ્લા વિસ્તારમાં ૧૦૦ મીટર (૩૨૮ ફૂટ) સુધી
સુસંગત એપ્લિકેશનTuyaSmart or Smart Life
Product Dimensions (D*W*H)82mm x 42mm x 16mm (3.23in x 1.65in x 0.63in)

4. સેટઅપ અને ઇન્સ્ટોલેશન

  1. બેટરી દાખલ કરો: Open the battery compartment on the back of the sensor and insert two AA LR6 1.5V batteries, ensuring correct polarity. Close the compartment securely.
  2. એપ્લિકેશન ડાઉનલોડ કરો: Download and install either the "TuyaSmart" or "Smart Life" application from your smartphone's app store (Google Play Store for Android or Apple App Store for iOS).
  3. નોંધણી/લોગિન: એપ ખોલો અને નવું એકાઉન્ટ રજીસ્ટર કરો અથવા હાલના એકાઉન્ટથી લોગ ઇન કરો.
  4. ઉપકરણ ઉમેરો:
    • નવું ઉપકરણ ઉમેરવા માટે એપ્લિકેશનના ઉપરના જમણા ખૂણામાં "+" ચિહ્નને ટેપ કરો.
    • Select "Security & Sensor" or "Water Sensor" from the device list.
    • Follow the on-screen instructions to put the sensor into pairing mode. This usually involves pressing and holding a button on the sensor until an indicator light flashes rapidly.
    • ખાતરી કરો કે તમારો સ્માર્ટફોન 2.4GHz WiFi નેટવર્ક સાથે જોડાયેલ છે. સેન્સર 5GHz WiFi ને સપોર્ટ કરતું નથી.
    • Enter your WiFi network password in the app.
    • Wait for the sensor to connect to the network. Once connected, the indicator light will stop flashing and remain solid, or turn off.
  5. પ્લેસમેન્ટ:
    • Place the main sensor unit in a dry location near the area you wish to monitor.
    • Position the wired water detection probe on the floor or surface where water leaks are most likely to occur (e.g., near water heaters, washing machines, sinks, toilets, basements). Ensure the metal contacts on the probe are facing downwards.
    • Secure the main unit using adhesive pads or screws if desired.
2.4GHz WiFi One-Key Connect Easy Setup illustration

Figure 3: Illustration emphasizing the easy setup process with 2.4GHz WiFi connectivity.

5. ઓપરેટિંગ સૂચનાઓ

Once successfully set up and connected to your WiFi network, the ELECTROPRIME Water Sensor operates automatically:

6. જાળવણી

7. મુશ્કેલીનિવારણ

સમસ્યાસંભવિત કારણઉકેલ
Sensor not connecting to WiFi.Incorrect WiFi password; Sensor too far from router; Router is 5GHz only; Sensor not in pairing mode.Verify WiFi password; Move sensor closer to router; Ensure your router supports 2.4GHz and connect your phone to it during setup; Re-enter pairing mode.
No alerts received on phone.App notifications disabled; Phone not connected to internet; Sensor not connected to WiFi; Sensor batteries low.Enable notifications for the app in phone settings; Ensure phone has internet access; Check sensor's WiFi connection status in app; Replace batteries.
Sensor not beeping when water is detected.Batteries are dead or low; Probe contacts are dirty or not fully submerged.Replace batteries; Clean probe contacts and ensure they are fully in contact with water.
ટૂંકી બેટરી જીવન.Frequent alarms; Poor WiFi signal requiring more power; Low quality batteries.Address source of frequent alarms; Improve WiFi signal strength; Use high-quality alkaline batteries.

8. વોરંટી અને સપોર્ટ

For information regarding warranty coverage, returns, or technical support for your ELECTROPRIME WiFi Water Sensor & Flood Sensor (Model: EDA0031087), please refer to the warranty policy provided by your retailer or contact ELECTROGADGETSSTORE, the manufacturer, directly. Contact details can typically be found on the product packaging or the manufacturer's official webસાઇટ

કોઈપણ વોરંટી દાવા માટે કૃપા કરીને તમારી ખરીદીનો પુરાવો રાખો.

Documents - ELECTROPRIME – EDA0031087

કોઈ સંબંધિત દસ્તાવેજો નથી