ABUS AZAA10000 Terxon SX એલાર્મ કંટ્રોલ પેનલ વપરાશકર્તા માર્ગદર્શિકા

1. પરિચય

This manual provides essential information for the installation, operation, and maintenance of your ABUS AZAA10000 Terxon SX Alarm Control Panel. Please read these instructions carefully before attempting to install or operate the system to ensure proper functionality and safety.

The ABUS AZAA10000 Terxon SX is a wired alarm control panel designed to provide reliable security for your premises. It integrates various security components to detect intrusions and alert users.

2. સલામતી માહિતી

• ઇલેક્ટ્રિકલ સલામતી: Installation and wiring should only be performed by qualified personnel. Disconnect power before servicing the unit.
• બેટરી હેન્ડલિંગ: The system uses a lead-acid battery. Handle with care. Do not short-circuit, puncture, or expose to extreme temperatures. Dispose of batteries according to local regulations.
• પર્યાવરણીય પરિસ્થિતિઓ: Install the control panel in a dry, protected area, away from direct sunlight, extreme temperatures, and high humidity.
• અધિકૃત ઉપયોગ: Use the system only for its intended purpose as an alarm control panel.

3. પેકેજ સામગ્રી

ખાતરી કરો કે બધા ઘટકો પેકેજમાં હાજર છે:

• ABUS AZAA10000 Terxon SX એલાર્મ કંટ્રોલ પેનલ
• Keypad (LCD control panel)
• Installation hardware (screws, anchors)
• વપરાશકર્તા માર્ગદર્શિકા (આ દસ્તાવેજ)
• પાવર કેબલ/એડેપ્ટર
• Lead-acid battery (may be pre-installed or separate)

4. ઉત્પાદન ઓવરview

The ABUS AZAA10000 Terxon SX system consists of a main control panel unit and a separate LCD keypad for user interaction.

આકૃતિ 1: ABUS AZAA10000 Terxon SX Alarm Control Panel (right) and LCD Keypad (left). The control panel houses the main electronics and battery, while the keypad provides the interface for arming, disarming, and system configuration.

આકૃતિ 2: અન્ય view of the ABUS AZAA10000 Terxon SX Alarm Control Panel and LCD Keypad, highlighting the compact design of the keypad for discreet placement.

4.1 નિયંત્રણ પેનલ

The main control panel unit is the central processing unit of the alarm system. It manages all connected sensors, communicates with the keypad, and triggers alarms. It typically includes terminals for wired connections, a power input, and a compartment for the backup battery.

4.2 એલસીડી કીપેડ

The LCD keypad serves as the primary user interface. It features a display for status messages, a numeric keypad for entering codes, and function buttons for arming, disarming, and accessing system menus. Compatible devices include the LCD control panel, relay board, and optional plug-in relay module.

5. સેટઅપ અને ઇન્સ્ટોલેશન

Proper setup and installation are crucial for the reliable operation of your alarm system. It is recommended that installation be performed by a certified security technician.

5.1 નિયંત્રણ પેનલ માઉન્ટ કરવાનું

1. સ્થાન પસંદ કરો: Choose a secure, discreet, and centrally located area, preferably indoors, away from extreme temperatures and moisture. Ensure it is accessible for maintenance but not easily tampસાથે ered.
2. સુરક્ષિત માઉન્ટિંગ: Use appropriate screws and anchors (type: screw-in) to firmly attach the control panel to a wall. Ensure the mounting surface can support the unit's weight (2.8 kg).

૪.૨ કીપેડ માઉન્ટ કરવું

1. સ્થાન પસંદ કરો: Install the keypad near the main entry/exit point of the protected area, at a convenient height for all users.
2. સુરક્ષિત માઉન્ટિંગ: Mount the keypad securely to the wall using the provided hardware.

5.3 વાયરિંગ કનેક્શન્સ

The ABUS AZAA10000 Terxon SX is a wired system. All connections (sensors, sirens, power, keypad) must be made using appropriate wiring. Refer to the detailed wiring diagrams provided in the separate installation guide for specific terminal connections.

• પાવર કનેક્શન: Connect the control panel to a 230 Volt AC power source.
• બેટરી કનેક્શન: Connect the lead-acid backup battery to the designated terminals inside the control panel.
• કીપેડ કનેક્શન: Connect the keypad to the control panel using the specified wired connection.
• સેન્સર કનેક્શન્સ: Connect all wired sensors (e.g., motion detectors, door/window contacts) to the appropriate zone inputs on the control panel.
• Siren/Strobe Connections: Connect external sirens and strobe lights to the alarm outputs.

૩.૩ પ્રારંભિક પાવર-અપ અને ગોઠવણી

1. પાવર લાગુ કરો: Once all wiring is complete and checked, connect the main power supply.
2. સિસ્ટમ પ્રારંભ: The system will perform a self-test. Follow the on-screen prompts on the keypad.
3. Program Master Code: Set a unique master user code. This code is essential for system programming and advanced functions.
4. Zone Programming: Configure each connected sensor zone according to its type (e.g., entry/exit, interior, 24-hour).
5. વપરાશકર્તા કોડ્સ: Create additional user codes for family members or authorized personnel.

6. ઓપરેટિંગ સૂચનાઓ

This section covers the basic daily operation of your ABUS AZAA10000 Terxon SX Alarm Control Panel.

6.1 સિસ્ટમ સશસ્ત્ર

• Full Arming (Away Mode): Ensures all zones are active. Enter your user code and press the "Arm" button (or equivalent). The system will provide an exit delay.
• Partial Arming (Stay Mode): Activates perimeter zones while allowing movement within interior zones. Enter your user code and press the "Stay" or "Partial Arm" button.

6.2 સિસ્ટમ નિarશસ્ત્રીકરણ

To disarm the system, enter your user code when prompted (e.g., upon entry during the entry delay) or press the "Disarm" button (or equivalent) and then enter your code.

6.3 Alarm Events

When an alarm is triggered, the system will activate sirens (audio) and potentially strobe lights (visual). The keypad display will indicate the triggered zone. To silence the alarm, disarm the system using your user code.

6.4 સિસ્ટમ સ્થિતિ

The LCD keypad displays the current system status, including armed/disarmed state, open zones, and any system faults (e.g., low battery, communication errors).

7. જાળવણી

Regular maintenance ensures the longevity and reliability of your alarm system.

• બેટરી તપાસ: The lead-acid backup battery should be checked periodically (e.g., annually) and replaced every 3-5 years, or when the system indicates a low battery fault.
• સફાઈ: Gently wipe the keypad and control panel housing with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• સેન્સર પરીક્ષણ: Periodically test all connected sensors (e.g., motion detectors, door/window contacts) to ensure they are functioning correctly.
• સૉફ્ટવેર અપડેટ્સ: While specific software update information is not available, it is good practice to consult with your installer or ABUS support for any recommended firmware updates.

8. મુશ્કેલીનિવારણ

This section addresses common issues you might encounter with your ABUS AZAA10000 Terxon SX Alarm Control Panel.

For issues not listed here or if troubleshooting steps do not resolve the problem, please contact ABUS technical support or your certified installer.

9. સ્પષ્ટીકરણો

10. વોરંટી અને સપોર્ટ

ABUS provides a warranty period of at least 2 વર્ષ after purchase for this product, ensuring proper functionality and protection against defects.

Spare parts availability is guaranteed for 1 વર્ષ.

For technical assistance, warranty claims, or further information, please contact your authorized ABUS dealer or visit the official ABUS webઆધાર સંસાધનો માટે સાઇટ.