Pulsar 2,400W Portable Gas-Powered Quiet Inverter Generator

પરિચય

This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your Pulsar GD240N portable inverter generator. Please read this manual thoroughly before operating the generator to ensure proper usage and longevity of the product.

મુખ્ય લક્ષણો:

• 2400W starting watts, 1800W running watts
• Type A & Type C USB ports
• સુપર શાંત કામગીરી
• Three-in-one switch for simplified control
• Parallel capability to combine with another unit for increased power output
• Enhanced fuel efficiency

સલામતી માહિતી

ખતરો: કાર્બન મોનોક્સાઇડ સંકટ

Using a generator indoors WILL KILL YOU IN MINUTES. Generator exhaust contains poisonous carbon monoxide gas that can cause unconsciousness or DEATH. Operate in well-ventilated, outdoor areas away from open windows or doors. Point exhaust away from occupied areas. Do not run generator in enclosed areas (e.g., not in house or garage). Move to fresh air and get medical help if sick, dizzy, or weak.

Always ensure the generator is placed on a level surface and away from any flammable materials. Keep children and pets away from the operating unit.

પેકેજ સામગ્રી

Your Pulsar GD240N generator package includes the following items:

• Pulsar GD240N Portable Inverter Generator
• માલિકની માર્ગદર્શિકા
• ઓઇલ ફનલ
• Basic Tool Kit (screwdriver)

સેટઅપ

એન્જિન તેલ ઉમેરી રહ્યા છે

Before starting the generator for the first time, you must add engine oil. The generator is shipped without oil.

1. Locate the oil fill cap on the side of the generator.
2. Remove the side panel by unscrewing the two screws.
3. ઓઈલ ફિલ કેપ/ડીપસ્ટિક દૂર કરો.
4. Using the provided funnel, carefully add 5W-30 engine oil until it reaches the upper mark on the dipstick. The oil capacity is approximately 0.33 - 0.35 US Quarts (11.2 oz).
5. Replace the oil fill cap and secure the side panel.

Image: Locating the oil fill cap and adding 5W-30 engine oil to the Pulsar GD240N inverter generator.

બળતણ ઉમેરવાનું

Use only fresh, unleaded gasoline with an octane rating of 87 or higher. Do not use E85 fuel.

1. ખાતરી કરો કે જનરેટર સમતલ સપાટી પર છે અને એન્જિન બંધ અને ઠંડુ છે.
2. ફ્યુઅલ કેપને સ્ક્રૂ કાો.
3. Carefully fill the fuel tank (capacity 1.18 Gallons) with gasoline, leaving a small air gap at the top to allow for fuel expansion.
4. ઇંધણ કેપ સુરક્ષિત રીતે બદલો.

ઉપર નિયંત્રણોview

Familiarize yourself with the control panel located on the front of the generator:

• એન્જિન સ્વિચ: A three-in-one switch for OFF, RUN, and CHOKE positions.
• Eco Mode Switch: Activates or deactivates Eco mode for improved fuel efficiency and quieter operation under light loads.
• AC 120V 20A Outlets: Two standard household outlets.
• AC 120V 30A Outlet: For higher power demands (e.g., RVs).
• યુએસબી પોર્ટ્સ: Includes Type A and Type C ports for charging electronic devices.
• DC 12V Outlet: For 12-volt DC appliances.
• Circuit Breaker/Reset Button: Resets the circuit in case of an overload.
• Parallel Connection Ports: Allows connection of two compatible generators for increased power.
• સૂચક લાઇટ્સ: Displays status for Low Oil, Overload, and Output.

છબી: વિગતવાર view of the Pulsar GD240N control panel, showing AC outlets, USB ports, DC 12V outlet, and various switches and indicator lights.

ઓપરેટિંગ સૂચનાઓ

જનરેટર શરૂ કરી રહ્યા છીએ

1. Ensure the generator has sufficient oil and fuel.
2. ઇંધણ વાલ્વને 'ચાલુ' સ્થિતિમાં ફેરવો.
3. Move the engine switch to the 'CHOKE' position (if the engine is cold).
4. એન્જિન શરૂ ન થાય ત્યાં સુધી રીકોઇલ સ્ટાર્ટર હેન્ડલને મજબૂતીથી ખેંચો.
5. Once the engine starts, gradually move the engine switch to the 'RUN' position.
6. Allow the generator to warm up for a few minutes before connecting electrical loads.

Image: The side of the Pulsar GD240N generator showing the engine switch in the 'RUN' position.

ઇકો મોડ

The Eco Mode switch allows the generator to adjust engine speed based on the load, optimizing fuel consumption and reducing noise levels. For light loads, switch to 'ON' for quieter and more efficient operation. For heavy loads or when starting high-demand appliances, switch to 'OFF' to ensure full power is available.

કનેક્ટિંગ ઉપકરણો

Connect your electrical devices to the appropriate outlets on the control panel. Ensure that the total wattagકનેક્ટેડ ડિવાઇસનો e જનરેટરના ચાલી રહેલા વોટ કરતાં વધુ નથીtage (1800W) to prevent overloading.

સમાંતર કામગીરી

The Pulsar GD240N is equipped with parallel connection ports, allowing you to link two compatible Pulsar inverter generators together to double your power output. Refer to the parallel kit's instruction manual for detailed connection procedures.

જાળવણી

Regular maintenance is crucial for the optimal performance and longevity of your generator. Always ensure the engine is off and cool before performing any maintenance.

એન્જિન તેલ ફેરફાર

Change the engine oil after the first 20 hours of use or the first month, whichever comes first. Subsequent oil changes should be performed every 100 hours or every 6 months.

1. Place a suitable container under the oil drain plug.
2. Remove the oil drain plug and the oil fill cap to allow the oil to drain completely.
3. Once drained, replace the oil drain plug.
4. Refill with fresh 5W-30 engine oil as described in the 'Adding Engine Oil' section.

Spark Plug Access

The spark plug is accessible for inspection and replacement. Remove the spark plug cover to access the spark plug. Inspect the spark plug for wear and proper gap. Replace if necessary.

સ્પાર્ક એરેસ્ટર

The generator is equipped with a spark arrestor, making it US Forestry approved. Regularly inspect and clean the spark arrestor to prevent carbon buildup, which can restrict exhaust flow and affect performance. Refer to the owner's manual for detailed cleaning instructions.

છબી: પાછળનો ભાગ view of the Pulsar GD240N generator, highlighting the exhaust port and spark arrestor.

મુશ્કેલીનિવારણ

If your generator experiences issues, consult the following common troubleshooting tips:

સૂચક લાઇટ્સ

• ઓછી ઓઈલ લાઈટ: If illuminated, check and add engine oil. The generator may shut down automatically to prevent engine damage.
• ઓવરલોડ લાઇટ: If illuminated, the generator is overloaded. Disconnect some devices and press the reset button.
• આઉટપુટ લાઇટ: A green light indicates normal power output.

સામાન્ય મુદ્દાઓ

• એન્જિન શરૂ થશે નહીં: ઇંધણ સ્તર, તેલ સ્તર, સ્પાર્ક પ્લગ તપાસો અને ખાતરી કરો કે એન્જિન સ્વીચ યોગ્ય સ્થિતિમાં છે.
• કોઈ પાવર આઉટપુટ નથી: Check for tripped circuit breakers, ensure the generator is not overloaded, and verify all connections.

વિશિષ્ટતાઓ

વોરંટી અને આધાર

વોરંટી માહિતી

This Pulsar GD240N inverter generator comes with a 2-Year Manufacturer's Warranty. Please retain your proof of purchase for warranty claims.

ગ્રાહક આધાર

For technical assistance, warranty inquiries, or to order replacement parts, please contact Pulsar Products customer support. Refer to the official Pulsar webસંપર્ક વિગતો માટે સાઇટ અથવા તમારા ખરીદી દસ્તાવેજો.