પરિચય
This instruction manual provides essential information for the proper installation, operation, and maintenance of your Atomic Pool Filter Cartridge. Designed as a high-quality replacement, this filter ensures clear and clean pool water by effectively capturing debris and impurities. Adhering to these guidelines will help maximize the lifespan and performance of your filter cartridge.
Please read this manual thoroughly before proceeding with installation or maintenance.
ઉત્પાદન સ્પષ્ટીકરણો
- મોડલ નંબર: WP.HAY1228
- ફિલ્ટર વિસ્તાર: 40 ચોરસ ફૂટ
- લંબાઈ: 14 3/16 ઇંચ
- બાહ્ય વ્યાસ: 7 ઇંચ
- ટોચનું ઉદઘાટન: 3 inch open hole
- Bottom Opening: 3 inch open hole
- મીડિયા સામગ્રી: 100% thermally bonded Pool-duty polyester fabric
- બાંધકામ: Point-bond construction, injection-molded cores, fade-resistant urethane banding
Figure 1: Detailed dimensions of the Atomic Pool Filter Cartridge, showing a length of 14 3/16 inches and an outer diameter of 7 inches, with 3-inch open holes at the top and bottom.
સુસંગતતા
This Atomic Pool Filter Cartridge is designed as a compatible replacement for the following filter models:
- Hayward Easy Clear C400
- Hayward CX410-RE
- Filbur FC-1228
- Pleatco PA40
- Unicel C-7442
Note: All trademarks remain the property of their respective holders and are used for compatibility information only. Atomic is an independent brand.
ઇન્સ્ટોલેશન સૂચનાઓ
Follow these steps to safely replace your pool filter cartridge. Always consult your pool filter system's manufacturer manual for specific instructions related to your filter housing.
- પાવર બંધ કરો: Ensure all power to the pool pump and filter system is completely shut off at the circuit breaker to prevent accidental startup.
- દબાણ દૂર કરો: Open the air relief valve on top of your filter tank to release any trapped air and pressure.
- Drain Filter Tank: Open the drain plug at the bottom of the filter tank to allow water to drain out.
- ફિલ્ટર હાઉસિંગ ખોલો: cl દૂર કરોamp or lid from the filter tank according to your system's instructions. Carefully lift out the old filter cartridge.
- Clean Filter Housing: Inspect the inside of the filter tank for any debris and clean it thoroughly. Check the O-ring for cracks or wear; replace if necessary and lubricate with a silicone-based lubricant.
- નવું કારતૂસ દાખલ કરો: Carefully place the new Atomic Pool Filter Cartridge into the filter tank. Ensure it is seated correctly and securely.
- Close Filter Housing: Replace the filter tank lid and secure the clamp. Close the drain plug.
- પંપને પ્રાઇમ કરો: Close the air relief valve. Turn on the pool pump. Once water begins to flow, open the air relief valve again to allow any remaining air to escape, then close it once a steady stream of water emerges.
- લીક્સ માટે તપાસો: Monitor the filter system for any leaks around the tank lid or connections.
આકૃતિ 2: ટોચ view of the Atomic Pool Filter Cartridge, showing the open hole design for easy installation.
સંચાલન માર્ગદર્શિકા
For optimal performance and water clarity, ensure your pool pump operates for an adequate duration each day. The recommended run time typically allows for the entire volume of pool water to be filtered at least once per day. Consult a pool professional or your pool system's manual for specific recommendations based on your pool size and usage.
Figure 3: Illustration highlighting the filtration benefits, including improved water clarity, capture of dirt, leaves, and hair, and reduced pool maintenance.
જાળવણી અને સફાઈ
Regular cleaning of your filter cartridge is crucial for maintaining efficient filtration and extending the life of the cartridge. The frequency of cleaning depends on pool usage, environmental factors, and the size of your filter system.
સફાઈ પ્રક્રિયા:
- પાવર બંધ કરો: As with installation, always turn off all power to the pool pump and filter system.
- Relieve Pressure and Drain: Open the air relief valve and drain plug to release pressure and water from the filter tank.
- Remove Cartridge: Open the filter housing and carefully remove the cartridge.
- પાણીથી કોગળા કરો: Use a garden hose with a spray nozzle to thoroughly rinse the pleats of the cartridge. Start from the top and work your way down, ensuring all debris is dislodged. Pay attention to the folds of the pleats.
- Chemical Cleaning (Optional): For stubborn dirt, oils, or calcium deposits, use a specialized filter cleaning solution. Follow the manufacturer's instructions for soaking and rinsing.
- Inspect and Reinstall: Inspect the cartridge for any damage (tears, broken bands). If damaged, replace it. Otherwise, reinstall the clean cartridge following the installation steps.
ભલામણ કરેલ સફાઈ આવર્તન:
- પ્રકાશ ઉપયોગ: દર 4-6 અઠવાડિયા
- મધ્યમ ઉપયોગ: દર 2-4 અઠવાડિયા
- Heavy Use/High Debris: Weekly or bi-weekly
Figure 4: Diagram illustrating the robust construction of the Atomic Pool Filter, featuring durable media, injection-molded cores, and fade-resistant urethane banding for extended life and efficient cleaning.
મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| Reduced Water Flow / Low Pressure | Clogged filter cartridge, air in system, pump issues. | Clean or replace filter cartridge. Bleed air from system. Check pump basket and impeller. |
| વાદળછાયું પૂલ પાણી | ગંદા ફિલ્ટર, અયોગ્ય રાસાયણિક સંતુલન, અપૂરતો ગાળણ સમય. | Clean or replace filter. Test and adjust pool chemistry. Increase pump run time. |
| Filter Leaking | Damaged O-ring, loose clamp, cracked housing. | Inspect and replace O-ring. Tighten clamp. Inspect filter housing for damage. |
વોરંટી અને આધાર
Atomic Filters stands behind the quality of its products. For specific warranty information regarding your Atomic Pool Filter Cartridge, please refer to the product packaging or visit the official Atomic Filters website. If you encounter any issues or require further assistance, please contact Atomic Filters customer support.
તમે વધુ માહિતી અને સંપર્ક વિગતો પર મેળવી શકો છો Atomic Filters Brand Store.
