Olympia D-820T Overflow and Waste Drain Trim Kit User Manual

પરિચય

This manual provides instructions for the installation, operation, and maintenance of the Olympia D-820T Overflow and Waste Drain Trim Kit. This kit is designed to enhance the functionality and appearance of your bathtub drain system. Please read these instructions thoroughly before beginning installation or use.

ઉત્પાદન ઓવરview

The Olympia D-820T Trim Kit includes the following components:

• Overflow Snap-In Cap (Chrome finish)
• Push & Pull Strainer Group (Chrome finish)

This trim kit is specifically designed for use with Olympia D-820R-PVC and D-820RS-PVC drain bodies. The overflow cap design doubles the overflow drain capacity compared to traditional screw-face plates.

Image: The Olympia D-820T Overflow and Waste Drain Trim Kit, showing the chrome overflow snap-in cap (top) and the chrome push & pull strainer (bottom).

સેટઅપ અને ઇન્સ્ટોલેશન

This trim kit is intended to be installed over an existing compatible Olympia D-820R-PVC or D-820RS-PVC drain body. Ensure you have the correct drain body before proceeding.

1. Prepare the Bathtub: Ensure the bathtub is clean and free of debris around the overflow and drain openings.
2. Install Overflow Snap-In Cap: Align the overflow snap-in cap with the overflow opening on the bathtub. Press firmly until the cap snaps securely into place over the existing overflow drain body. Ensure a tight fit to prevent leaks.
3. Install Push & Pull Strainer: Insert the push & pull strainer into the main drain opening. The strainer is designed to fit into the existing drain body. Ensure the rubber gasket on the strainer creates a seal with the drain opening. Some minor adjustments or a rubber mallet may be needed for a snug fit. Do not overtighten or force components excessively.
4. લીક માટે પરીક્ષણ: Fill the bathtub with water and check both the overflow and main drain for any signs of leakage. Operate the push & pull strainer several times to ensure proper sealing and drainage.

જો તમને ઇન્સ્ટોલેશન પ્રક્રિયાના કોઈપણ પગલા વિશે ખાતરી ન હોય, તો લાયક પ્લમ્બરનો સંપર્ક કરવાની ભલામણ કરવામાં આવે છે.

ઓપરેશન

The D-820T Trim Kit features a push & pull strainer for controlling water drainage.

• ડ્રેઇન બંધ કરવા માટે: Press down firmly on the top of the strainer. This will seal the drain, allowing the bathtub to fill with water.
• ડ્રેઇન ખોલવા માટે: Pull up on the top of the strainer. This will unseal the drain, allowing water to flow out.

The overflow snap-in cap functions automatically to prevent the bathtub from overflowing by directing excess water into the drain system.

જાળવણી

Regular cleaning will help maintain the appearance and functionality of your Olympia D-820T Trim Kit.

• સફાઈ: Use a soft cloth and mild, non-abrasive cleaner specifically designed for chrome finishes. Avoid harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the finish.
• નિયમિત તપાસ: Periodically check the strainer and overflow cap for any buildup of hair or debris that might impede drainage. Clean as necessary.
• ગાસ્કેટ તપાસ: Ensure the rubber gasket on the push & pull strainer remains intact and provides a good seal. Replace if worn or damaged.

મુશ્કેલીનિવારણ

વિશિષ્ટતાઓ

• મોડલ: ડી-820T
• બ્રાન્ડ: ઓલિમ્પિયા
• સામગ્રી: ધાતુ
• રંગ: ક્રોમ
• વસ્તુનું વજન: 6.7 ઔંસ
• પેકેજ પરિમાણો: 4.53 x 4.21 x 3.23 ઇંચ
• સુસંગતતા: Designed for Olympia D-820R-PVC & D-820RS-PVC drain bodies.

વોરંટી અને આધાર

For warranty information or technical support regarding your Olympia D-820T Overflow and Waste Drain Trim Kit, please refer to the official Olympia webસાઇટ પર જાઓ અથવા તેમના ગ્રાહક સેવા વિભાગનો સંપર્ક કરો. વોરંટી દાવાઓ માટે તમારી ખરીદી રસીદ રાખો.

Olympia Customer Service: કૃપા કરીને મુલાકાત લો the Olympia Store on Amazon or the official Olympia webસંપર્ક વિગતો માટે સાઇટ.