1. પરિચય
This manual provides detailed instructions for the setup, operation, and maintenance of your XUANZIT LLR104 Digital Alarm Clock. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Figure 1: XUANZIT LLR104 Digital Alarm Clock. This image displays the front of the clock with its green LED display showing the time 10:24 PM, and the control buttons below the display.
ઉત્પાદન લક્ષણો:
- Dimmable LED Display: Ultra-clear display with 6 levels of brightness.
- Loud Alarm: 5-level adjustable buzzer volume (65 to 85 dB).
- Plug-in Electric: Powered via USB-C connector.
- Memory Function: 2xAAA battery backup preserves time and settings during power outages
- Simple Operation: All primary buttons located on the front for ease of use.
- Time Format: Switchable 12/24-hour display.
- Snooze Function: Adjustable snooze time from 1 to 15 minutes.
2. સેટઅપ
2.1 પાવર કનેક્શન
- Connect the provided USB-C cable to the USB-C port on the back of the alarm clock.
- Plug the other end of the USB-C cable into a compatible USB power adapter (not always included) and then into a wall outlet. The clock display will illuminate.
- For memory backup, open the battery compartment on the back of the clock and insert 2 AAA batteries (not included). These batteries will preserve time and alarm settings in case of a power interruption, but will not power the display.

Figure 2: Power and Battery Backup. This image shows the rear of the clock, highlighting the Universal USB-C Connector for power input and the 2 x AAA Battery Compartment for memory function.
૨.૩ પ્રારંભિક સમય સેટિંગ
- Press and hold the "Time-Set" button (labeled "12/24hr Time-Set") located on the front of the clock. The hour digits will begin to flash.
- Use the "+"અથવા"-" buttons to adjust the hour. Pay attention to the PM indicator if using 12-hour format.
- " દબાવોTime-Set" button again to switch to minute adjustment. The minute digits will flash.
- Use the "+"અથવા"-" buttons to adjust the minutes.
- " દબાવોTime-Set" button a third time to confirm the time setting and exit time setting mode.
3. ઓપરેટિંગ સૂચનાઓ

Figure 3: Front Panel Controls. This image highlights the five control buttons on the front of the clock: 12/24hr Time-Set, ON/OFF AL-Set, SNOOZE, -, and +.
૪.૨ ૧૨/૨૪ કલાક ફોર્મેટ સેટ કરવું
To switch between 12-hour and 24-hour time display, briefly press the "Time-Set" button (labeled "12/24hr Time-Set") when not in time setting mode. The PM indicator will appear for 12-hour format (PM only, AM is implied by absence of PM).

Figure 4: 12Hr and 24Hr Time Formats. This image illustrates the clock displaying time in both 12-hour format (10:24 PM) and 24-hour format (22:24).
3.2 એલાર્મ સેટ કરવું
- Press and hold the "AL-Set" button (labeled "ON/OFF AL-Set"). The alarm hour digits will begin to flash, and an alarm icon (bell symbol) will appear on the display.
- Use the "+"અથવા"-" buttons to adjust the alarm hour.
- " દબાવોAL-Set" button again to switch to alarm minute adjustment. The alarm minute digits will flash.
- Use the "+"અથવા"-" buttons to adjust the alarm minutes.
- " દબાવોAL-Set" button a third time to confirm the alarm setting. The alarm icon will remain on, indicating the alarm is active.
૫.૪ એલાર્મ ચાલુ/બંધ કરવું
Briefly press the "AL-Set" button (labeled "ON/OFF AL-Set") when not in alarm setting mode to toggle the alarm on or off. The alarm icon will appear when the alarm is active and disappear when it is off.
૫.૬ એલાર્મ વોલ્યુમ ગોઠવવું
When the alarm is sounding, press the "+"અથવા"-" buttons to cycle through the 5 available buzzer volume levels (65dB to 85dB). The selected volume will be saved for future alarms.

Figure 5: Adjustable Alarm Volume. This image shows the clock with an overlay indicating 5 levels of buzzer volume, ranging from Quiet (65dB) to Extra Loud (85dB).
૫.૨ ડિસ્પ્લે બ્રાઇટનેસ એડજસ્ટ કરવી
Briefly press the "સ્નૂઝ" button when the alarm is not sounding to cycle through the 6 levels of LED display brightness. Select the brightness level that suits your preference.

Figure 6: Dimmable LED Display. This image demonstrates the clock's display at various brightness levels, from very dim to very bright.
3.6 સ્નૂઝ ફંક્શન
When the alarm sounds, press the "સ્નૂઝ" button to temporarily silence the alarm. The alarm will sound again after the preset snooze duration. The default snooze duration is 9 minutes. To adjust the snooze duration (1-15 minutes):
- While the alarm is sounding, press and hold the "સ્નૂઝ" button. The snooze duration will flash.
- Use the "+"અથવા"-" buttons to set your desired snooze duration (1-15 minutes).
- Briefly press the "સ્નૂઝ" button again to confirm the setting and activate snooze.
To turn off the alarm completely when it is sounding, press any button other than "સ્નૂઝ" (e.g., "ON/OFF AL-Set", "Time-Set", "+", or "-").
4. જાળવણી
4.1 સફાઈ
- Ensure the clock is unplugged from the power source before cleaning.
- Wipe the clock's surface with a soft, dry, or slightly damp કાપડ
- Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the finish or internal components.
4.2 Battery Replacement (Backup)
- If the clock frequently loses time or settings during brief power interruptions, the AAA backup batteries may need replacement.
- Unplug the clock from the main power source.
- ઘડિયાળના પાછળના ભાગમાં બેટરીનો ડબ્બો ખોલો.
- Remove the old AAA batteries and insert two new AAA batteries, ensuring correct polarity (+/-).
- Close the battery compartment and reconnect the clock to its power source.
5. મુશ્કેલીનિવારણ
| સમસ્યા | સંભવિત કારણ | ઉકેલ |
|---|---|---|
| ઘડિયાળનું પ્રદર્શન બંધ છે. | વીજ પુરવઠો નથી. | Ensure the USB-C cable is securely connected to the clock and a working power adapter/outlet. |
| Clock loses time/settings after power outage. | બેકઅપ બેટરીઓ મરી ગઈ છે અથવા ઇન્સ્ટોલ કરેલી નથી. | Install 2 new AAA batteries or replace existing ones in the battery compartment. |
| એલાર્મ વાગતો નથી. | એલાર્મ સક્રિય થયેલ નથી અથવા અવાજ ખૂબ ઓછો છે. | Ensure the alarm icon is visible on the display. Adjust alarm volume using the '+' or '-' buttons when the alarm is sounding. |
| ડિસ્પ્લે ખૂબ તેજસ્વી/મંદ છે. | તેજ સ્તરને સમાયોજિત કરવાની જરૂર છે. | Briefly press the "SNOOZE" button to cycle through brightness levels. |
| Cannot set time/alarm. | Not in setting mode or buttons not responding. | Press and hold "Time-Set" or "AL-Set" until digits flash. If unresponsive, unplug and replug the clock to reset. |
6. સ્પષ્ટીકરણો
- મોડલ: LLR104 (XZT104G)
- બ્રાન્ડ: XUANZIT
- ડિસ્પ્લે પ્રકાર: એલઇડી
- પાવર સ્ત્રોત: USB-C (Input: DC 5V)
- બેકઅપ બેટરી: 2 x AAA (not included, for memory function only)
- એલાર્મ વોલ્યુમ: 5 levels, 65-85 dB
- ડિસ્પ્લે બ્રાઇટનેસ: 6 સ્તરો
- સ્નૂઝ સમયગાળો: 1-15 મિનિટ એડજસ્ટેબલ
- સમય ફોર્મેટ: 12/24 hour switchable
- સામગ્રી: પ્લાસ્ટિક
- ઉત્પાદન પરિમાણો: આશરે 3.56 x 3.81 x 7.62 સેમી (1.4 x 1.5 x 3 ઇંચ)
- વસ્તુનું વજન: આશરે 99.79 ગ્રામ (3.52 ઔંસ)
7. ગ્રાહક આધાર
For any questions, concerns, or technical assistance regarding your XUANZIT LLR104 Digital Alarm Clock, please refer to the retailer's customer service channels or visit the official XUANZIT webસપોર્ટ માહિતી માટે સાઇટ.
ભાવિ સંદર્ભ માટે કૃપા કરીને આ માર્ગદર્શિકા જાળવી રાખો.