BN-LINK 7-Day Outdoor Digital Programmable Timer

1. પરિચય

This manual provides instructions for the safe and efficient operation of your BN-LINK 7-Day Outdoor Digital Programmable Timer. This device is designed to automate the control of electrical appliances, offering convenience and energy savings for both indoor and outdoor applications. Please read this manual thoroughly before use and retain it for future reference.

2. સલામતી માહિતી

• ઇલેક્ટ્રિકલ સલામતી: Always ensure the timer is properly grounded. Do not immerse the timer in water.
• લોડ ક્ષમતા: Do not exceed the maximum load rating of 125V, 60 Hz, 15A/1875W Resistive, 10A/1250W Tungsten. Overloading can cause overheating and fire.
• આઉટડોર ઉપયોગ: When used outdoors, ensure the timer is mounted vertically at least 2 feet above the ground to prevent water accumulation and ensure proper drainage. Use with outdoor-rated appliances only.
• નિરીક્ષણ: Regularly inspect the timer and its cord for any signs of damage. Do not use if damaged.
• બાળકો: બાળકોની પહોંચથી દૂર રાખો.

3. ઉત્પાદન ઓવરview

The BN-LINK Digital Programmable Timer features a robust design suitable for various applications. It includes a digital display for easy programming and two grounded outlets for connecting devices.

3.1 ઘટકો

• એલસીડી ડિસ્પ્લે: Shows current time, day, and program status.
• નિયંત્રણ બટનો: WEEK, HOUR, MIN, R (Random), CLOCK, PROG (Program), MANUAL, RESET.
• Dual Grounded Outlets: Two outlets for connecting electrical devices.
• પાવર કોર્ડ: 18-inch heavy-duty cord with a 3-prong plug.
• આંતરિક બેટરી: Rechargeable battery for program retention during power outages

3.2 મુખ્ય લક્ષણો

• Up to 8 ON/OFF programs.
• 7-day programmable cycles (daily, specific days, weekdays, weekends, etc.).
• ડેલાઇટ સેવિંગ ટાઇમ (DST) ગોઠવણ.
• Random (Vacation) mode for enhanced security.
• Weatherproof and heavy-duty construction for outdoor use.

Figure 1: BN-LINK 7-Day Outdoor Digital Programmable Timer, showing the digital display, control buttons, and power cord.

Figure 2: Diagram illustrating the timer's multifunctional features, including 8 ON/OFF programs, 7-day programmability, and dual 3-prong outlets.

4. પ્રારંભિક સેટઅપ

Before first use, or after a prolonged period of storage, the internal battery may need charging. Plug the timer into a standard 125VAC outlet for at least 30 minutes to charge the battery. The display should become active.

4.1 Resetting the Timer

To clear all previous settings and reset the timer, use a small pointed object (like a pen tip) to press the રીસેટ કરો button located on the front panel. The display will show '12:00 AM' and 'MO' (Monday).

૫.૧ વર્તમાન સમય અને દિવસ સેટ કરવો

1. દબાવો ઘડિયાળ button once. The current day will flash.
2. દબાવો સપ્તાહ to select the current day (MO, TU, WE, TH, FR, SA, SU).
3. દબાવો કલાક to set the current hour (AM/PM).
4. દબાવો MIN વર્તમાન મિનિટ સેટ કરવા માટે.
5. દબાવો ઘડિયાળ ફરીથી પુષ્ટિ કરવા અને સમય સેટિંગ મોડમાંથી બહાર નીકળવા માટે.

5. ઓપરેટિંગ સૂચનાઓ

5.1 Programming ON/OFF Cycles

The timer allows for up to 8 distinct ON/OFF programs. Each program consists of an ON time and an OFF time, which can be set for specific days or groups of days.

1. દબાવો પ્રોગ button. The display will show '1 ON' and the time will flash.
2. દબાવો સપ્તાહ to select the desired day(s) for this program. Options include individual days, weekdays, weekends, or all 7 days.
3. દબાવો કલાક અને MIN to set the desired ON time.
4. દબાવો પ્રોગ again. The display will show '1 OFF' and the time will flash.
5. દબાવો સપ્તાહ, કલાક, અને MIN to set the desired OFF time for program 1.
6. Repeat steps 1-5 for programs 2 through 8 as needed.
7. બધા ઇચ્છિત પ્રોગ્રામ્સ સેટ કર્યા પછી, દબાવો ઘડિયાળ વર્તમાન સમય પ્રદર્શન પર પાછા ફરવા માટે બટન.

આકૃતિ 3: ઉદાamples of setting ON/OFF programs for automated control of outdoor lighting and devices.

5.2 મેન્યુઅલ ઓવરરાઇડ

દબાવો મેન્યુઅલ button to cycle through different operating modes: UTટો ચાલુ, UTટો બંધ, અને ON, બંધ. માં ઓટો ચાલુ/બંધ mode, the timer will follow the programmed settings. In ON mode, the outlets are continuously on. In બંધ mode, the outlets are continuously off.

૬.૭ ડેલાઇટ સેવિંગ ટાઇમ (DST)

To activate or deactivate Daylight Saving Time, press and hold the કલાક બટન દબાવો અને પછી દબાવો MIN button simultaneously. The display will show '+1h' when DST is active, adjusting the time forward by one hour.

5.4 Random (Vacation) Mode

To activate the Random (Vacation) mode, press the R button. The display will show 'RND'. In this mode, the timer will randomly turn connected lights ON and OFF within a set period, simulating occupancy to deter potential intruders. Press R ફરીથી નિષ્ક્રિય કરવા માટે.

Figure 4: The timer's Random (Vacation) Mode, designed to enhance home security by randomly activating lights.

6. સ્થાપન

The BN-LINK timer is designed for both indoor and outdoor use. Its weatherproof construction ensures durability in various conditions.

• આઉટડોર માઉન્ટિંગ: For optimal waterproofing and longevity, mount the timer vertically with the outlets facing downwards. Ensure it is positioned at least 2 feet above the ground.
• પ્લેસમેન્ટ: Choose a location that is easily accessible for programming but protected from direct heavy rainfall or standing water.

Figure 5: Illustration demonstrating the recommended vertical mounting of the weatherproof timer at least 2 feet above ground.

Figure 6: The BN-LINK timer installed outdoors, controlling string lights, showcasing its weatherproof design.

7. અરજીઓ

This versatile timer is suitable for a wide range of electrical devices and lighting, both indoors and outdoors.

• Outdoor lighting (e.g., Christmas lights, garden lights, string lights)
• Pond pumps and fountains
• રજા સજાવટ
• ઇન્ડોર એલamps and appliances

Figure 7: A visual representation of various applications for the BN-LINK timer, including holiday decorations, pool pumps, and garden features.

8. જાળવણી

To ensure the longevity and proper functioning of your timer:

• Keep the timer clean and free from dirt and debris.
• કઠોર રસાયણો અથવા ઘર્ષક ક્લીનર્સનો ઉપયોગ કરવાનું ટાળો.
• લાંબા સમય સુધી ઉપયોગમાં ન હોય ત્યારે સૂકી જગ્યાએ સ્ટોર કરો.

9. મુશ્કેલીનિવારણ

• પ્રોગ્રામ મુજબ ટાઈમર ચાલુ/બંધ થતું નથી:
  Ensure the timer is in ઓટો ચાલુ/બંધ mode. Verify that the ON/OFF times and days are correctly set in the program. Check the power connection.
• ડિસ્પ્લે ખાલી અથવા ઝાંખું છે:
  The internal battery may be depleted. Plug the timer into an outlet for at least 30 minutes to charge. If the issue persists, perform a રીસેટ કરો.
• Outlets not receiving power:
  Check the power source. Ensure the timer is plugged in securely. Verify the operating mode is set to ON or UTટો ચાલુ during the programmed ON period.

10. સ્પષ્ટીકરણો

11. વોરંટી અને સપોર્ટ

For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official BN-LINK webસાઇટ. ખરીદીના પુરાવા તરીકે તમારી ખરીદી રસીદ રાખો.