iScooter IK3 Electric Scooter for Kids Instruction Manual

1. સલામતી માહિતી

Please read this manual carefully before operating the iScooter IK3 Electric Scooter. Failure to follow instructions may result in injury or damage to the product.

• Always wear a helmet and protective gear (knee pads, elbow pads) when riding.
• Ensure all screws and fasteners are tightened before each ride.
• Do not ride in wet conditions, on uneven surfaces, or at night without proper lighting.
• Supervise children during operation. Recommended age range: 6-12 years.
• મહત્તમ વજન ક્ષમતા: 154 કિ.
• Avoid sudden stops or sharp turns at high speeds.
• સ્કૂટરમાં ફેરફાર ન કરો.

2. પેકેજ સામગ્રી

ખાતરી કરો કે બધી વસ્તુઓ પેકેજમાં હાજર છે:

• iScooter IK3 Electric Scooter (1)
• ચાર્જર (1)
• Foot Support (1)
• સૂચના માર્ગદર્શિકા (1)
• Assembly Tools (Allen wrenches)

Figure 2.1: The iScooter IK3 Electric Scooter and included accessories.

3. સેટઅપ અને એસેમ્બલી

૨.૧ અનબોક્સિંગ અને પ્રારંભિક સેટઅપ

The iScooter IK3 comes mostly pre-assembled. Follow these steps to prepare it for use:

1. Carefully remove the scooter and all components from the packaging.
2. Cut any zip ties securing the handlebar to the main frame.
3. Locate the folding mechanism lever near the base of the handlebar stem. Push down on this lever to unfold the main frame until it locks into place.
4. Extend the kickstand to support the scooter.

3.2 હેન્ડલબાર ઇન્સ્ટોલેશન

Attach the handlebar to the stem using the provided tools:

1. Align the handlebar with the top of the stem, ensuring the cables are not pinched.
2. Insert the provided screws into the designated holes on the handlebar clamp.
3. Use the appropriate Allen wrench to securely tighten the screws. Do not overtighten.

૩.૪ હેન્ડલબારની ઊંચાઈ ગોઠવવી

The handlebar height can be adjusted to suit the rider's comfort:

1. Locate the quick-release lever on the handlebar stem. Open the lever to loosen the stem.
2. Press the small button on the side of the stem and slide the handlebar up or down to one of the three adjustable height settings.
3. Once the desired height is selected, ensure the button snaps into one of the adjustment holes.
4. Close the quick-release lever firmly to secure the handlebar in place.

Figure 3.1: Children riding the iScooter IK3, highlighting its suitability for ages 6-12 and adjustable features.

3.4 ફોલ્ડિંગ અને અનફોલ્ડિંગ

To fold the scooter for storage or transport:

1. Ensure the kickstand is retracted.
2. Locate the folding mechanism lever at the base of the handlebar stem. Push down on the lever.
3. Gently fold the handlebar stem downwards until it clicks into place, securing it to the rear fender.

To unfold, reverse the steps: push down the lever, raise the handlebar stem until it locks, and then extend the kickstand.

4. ઓપરેટિંગ સૂચનાઓ

4.1 પાવર ચાલુ/બંધ

To power on the scooter, press and hold the power button on the LED display for approximately 3 seconds until the display illuminates. To power off, press and hold the power button again for 3 seconds.

4.2 સ્પીડ મોડ્સ

The iScooter IK3 features 3 adjustable speed settings:

• Gear E (Beginner): 3 એમપીએચ સુધી
• Gear N (Normal): 6 એમપીએચ સુધી
• Gear S (Sport): 10 એમપીએચ સુધી

To switch between speed modes, short press the power button while the scooter is on. The LED display will indicate the current speed mode (E, N, or S). The display also shows battery life and current speed.

Figure 4.1: The LED Digital Display provides real-time information on speed, battery level, and speed mode.

4.3 Lights Control

The scooter is equipped with colorful ambient lights for enhanced visibility and fun. To turn the lights on or off, press and hold the light button located near the power button on the handlebar.

Figure 4.2: Colorful ambient lights enhance visibility and add to the riding experience.

4.4 બ્રેકિંગ સિસ્ટમ

The iScooter IK3 features a dual braking system for reliable stopping power:

• E-Brake: Located on the handlebar, this electronic brake provides responsive stopping.
• Footbrake: A traditional footbrake located on the rear fender allows for additional control and stopping force. Press down on the rear fender with your foot to engage. When the footbrake is applied, the LED lights on the deck turn red as a warning.

Figure 4.3: The e-brake on the handlebar provides quick and easy stopping.

5. ચાર્જિંગ ઓપરેશન

The iScooter IK3 features an innovative magnetic charging design for easy and secure connection.

1. Locate the magnetic charging port on the side of the scooter deck.
2. Connect the magnetic charger to the port. The magnetic connection ensures proper alignment.
3. Plug the charger into a standard wall outlet. The charging indicator on the charger will show the charging status.
4. A full charge from 0% to 100% typically takes approximately 3 hours.
5. Ensure the scooter is fully charged before its first use for optimal performance.

Figure 5.1: The magnetic charging port offers a quick, easy, and secure connection.

6. જાળવણી

નિયમિત જાળવણી તમારા સ્કૂટરના લાંબા સમય સુધી ટકી રહેવા અને સલામત સંચાલનની ખાતરી આપે છે.

• સફાઈ: જાહેરાતથી સ્કૂટર સાફ કરોamp કાપડ કઠોર રસાયણો અથવા વધુ પડતા પાણીનો ઉપયોગ કરવાનું ટાળો.
• ટાયર: The IK3 uses solid rubber wheels, eliminating the need for inflation. Regularly inspect for wear and tear.
• બ્રેક્સ: Periodically check the functionality of both the e-brake and footbrake. Ensure they respond effectively.
• ફાસ્ટનર્સ: Regularly check all screws and bolts to ensure they are tight. Tighten as necessary.
• સંગ્રહ: સ્કૂટરને સીધા સૂર્યપ્રકાશ અને અતિશય તાપમાનથી દૂર ઠંડી, સૂકી જગ્યાએ સંગ્રહિત કરો.

7. મુશ્કેલીનિવારણ

સામાન્ય સમસ્યાઓ અને તેમના ઉકેલો માટે નીચેના કોષ્ટકનો સંદર્ભ લો:

8. સ્પષ્ટીકરણો

9. વોરંટી અને સપોર્ટ

iScooter prioritizes quality and technical excellence. We offer a warranty on different parts of the scooter:

• A 360-day or 180-day warranty on different parts (refer to specific warranty card for details).

For fast and professional service, please contact our support team:

• કૉલ સેન્ટર: +1 (855) 916-2366
• Live Chat/Email: support@iscooterglobal.com

Figure 9.1: iScooter Company Logo.