RAB Lighting SR8 8 ft. LED Strip Fixture Instruction Manual

1. ઉત્પાદન ઓવરview

The RAB SR8 is an 8-foot LED strip fixture designed for commercial lighting applications. This fixture features field-adjustable power settings (40W, 50W, 60W) and color temperatures (3500K, 4000K, 5000K), providing flexibility to suit various lighting needs. It is 0-10V dimmable and compatible with 120-277V electrical systems, offering efficient and versatile illumination.

આકૃતિ 1.1: ઉપરview of the RAB SR8 8 ft. LED Strip Fixture. This image displays the full length of the white LED strip fixture, highlighting its sleek and linear design suitable for surface mounting in commercial environments.

2. સલામતી માહિતી

• ચેતવણી: ઇલેક્ટ્રિક શોકનું જોખમ. ઇન્સ્ટોલેશન અથવા સર્વિસિંગ પહેલાં ફ્યુઝ અથવા સર્કિટ બ્રેકર પર પાવર ડિસ્કનેક્ટ કરો.
• Installation must be performed by a qualified electrician in accordance with all national and local electrical codes.
• સપ્લાય વોલ્યુમની ખાતરી કરોtage is correct for the fixture (120-277V).
• Do not handle energized fixture with wet hands.
• જ્વલનશીલ સામગ્રીની નજીક સ્થાપિત કરશો નહીં.
• આ ફિક્સ્ચર ફક્ત ઘરની અંદરના ઉપયોગ માટે બનાવાયેલ છે.

3. સેટઅપ અને ઇન્સ્ટોલેશન

3.1. પ્રી-ઇન્સ્ટોલેશન

• Unpack the fixture and inspect for any damage.
• Ensure all necessary components are present (LED Fixture).
• Turn off power at the circuit breaker before beginning installation.

3.2. ફિક્સ્ચર માઉન્ટ કરવું

The SR8 fixture is designed for surface mounting. Refer to the dimensional drawing for precise measurements and mounting hole locations.

આકૃતિ 3.1: Dimensional drawing of the RAB SR8 fixture. This diagram illustrates the length (94.49 inches), width (2.36 inches), and height (2.79 inches) of the fixture, along with potential mounting points.

1. Mark the desired mounting locations on the ceiling or wall, ensuring they align with the fixture's mounting points.
2. Drill appropriate holes for mounting screws (not included).
3. Secure the fixture to the mounting surface using suitable hardware.

3.3. ઇલેક્ટ્રિકલ વાયરિંગ

Connect the fixture to the electrical supply according to the wiring diagram below. Ensure all connections are secure and comply with local electrical codes.

આકૃતિ 3.2: Wiring diagram for the RAB SR8 LED Strip Fixture. This diagram shows the connections for Line (Black), Common (White), (+) DIMV (Purple), (-) DIMV (Pink), Vaux 12V (Red), and Ground (Ground) to the light fixture.

• Connect the black wire from the fixture to the LINE (hot) wire from the supply.
• Connect the white wire from the fixture to the COMMON (neutral) wire from the supply.
• Connect the green or bare copper wire from the fixture to the GROUND wire from the supply.
• For 0-10V dimming, connect the purple wire to (+) DIMV and the pink wire to (-) DIMV from the dimming control. If dimming is not used, cap these wires individually.
• Ensure all wire nuts or connectors are tightened securely.

4. ઓપરેટિંગ સૂચનાઓ

The RAB SR8 fixture allows for field adjustment of both power output and color temperature to customize lighting performance.

આકૃતિ 4.1: ક્લોઝ-અપ view of the power (W) and color temperature (CCT) adjustment switches on the RAB SR8 fixture. This image shows the physical switches used to select desired wattage and Kelvin temperature settings.

4.1. Power Adjustment (Wattage)

The fixture includes a switch to select the desired wattage output. This allows for optimization of brightness and energy consumption.

• Locate the "Power (W)" switch on the fixture.
• નીચેની સેટિંગ્સમાંથી એક પસંદ કરો: 40W, 50W, અથવા 60W.
• Ensure power is disconnected before adjusting this switch.

4.2. Color Temperature Adjustment (CCT)

The fixture also features a switch to select the desired color temperature, allowing you to choose between different light appearances.

• Locate the "Color Temperature (CCT)" switch on the fixture.
• નીચેની સેટિંગ્સમાંથી એક પસંદ કરો: 3500K (Neutral White), 4000K (Cool White), or 5000K (Daylight).
• Ensure power is disconnected before adjusting this switch.

4.3. Dimmable Functionality

The SR8 fixture supports 0-10V dimming. When connected to a compatible 0-10V dimmer, the light intensity can be adjusted from 100% down to 10% (or lower, depending on dimmer specifications).

• Ensure the fixture is correctly wired for 0-10V dimming as per Section 3.3.
• Use a compatible 0-10V dimmer switch (sold separately) to control the light output.

5. જાળવણી

The RAB SR8 LED Strip Fixture requires minimal maintenance. Regular cleaning can help maintain optimal performance and appearance.

• સફાઈ: સફાઈ કરતા પહેલા પાવર ડિસ્કનેક્ટ કરો. નરમ, સૂકા અથવા સહેજ ડીનો ઉપયોગ કરોamp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners or solvents.
• એલઇડી The integrated LED light source is designed for long life and does not require replacement.

6. મુશ્કેલીનિવારણ

If the fixture is not operating as expected, refer to the following common issues and solutions:

If troubleshooting steps do not resolve the issue, contact RAB Lighting customer support.

7. સ્પષ્ટીકરણો

8. વોરંટી માહિતી

The RAB SR8 LED Strip Fixture comes with a Limited Warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official RAB Lighting webસાઇટ પર જાઓ અથવા તેમની ગ્રાહક સેવાનો સીધો સંપર્ક કરો. વોરંટી દાવાઓ માટે ખરીદીનો પુરાવો રાખો.

9. ગ્રાહક આધાર

For technical assistance, replacement parts, or any questions not covered in this manual, please contact RAB Lighting customer support:

• Webસાઇટ: www.rablighting.com
• નો સંદર્ભ લો website for current contact information, including phone numbers and email support.