એમિકો 2x4 LED ટ્રોફર પેનલ લાઇટ સૂચના માર્ગદર્શિકા

1. ઉત્પાદન ઓવરview

This manual provides instructions for the Amico 2x4 LED Troffer Panel Light. This fixture is designed for drop ceilings and features adjustable color temperature (CCT) and wattage settings, along with 0-10V dimming capabilities. It is suitable for various indoor commercial and institutional applications.

Image 1.1: Four Amico 2x4 LED Troffer Panel Lights, illustrating the product's appearance.

2. સલામતી માહિતી

ઇન્સ્ટોલેશન અને ઉપયોગ કરતા પહેલા કૃપા કરીને બધી સૂચનાઓ કાળજીપૂર્વક વાંચો. ભવિષ્યના સંદર્ભ માટે આ માર્ગદર્શિકા જાળવી રાખો.

• ઇલેક્ટ્રિકલ સલામતી: Installation should be performed by a qualified electrician in accordance with national and local electrical codes. Ensure power is disconnected at the circuit breaker before installation or maintenance.
• ગ્રાઉન્ડિંગ: The fixture must be properly grounded to prevent potential electrical shock.
• ભાગtage: ચકાસો કે સપ્લાય વોલ્યુમtage is compatible with the fixture's operating voltage (10 Volts DC for control, consult product label for main power).
• ફક્ત આંતરિક ઉપયોગ: This product is designed for indoor use in dry locations. Do not expose to moisture or extreme temperatures.
• હેન્ડલિંગ: Handle the fixture with care to avoid damage to components.

3. પેકેજ સામગ્રી

ઇન્સ્ટોલેશન શરૂ કરતા પહેલા ખાતરી કરો કે બધા ઘટકો હાજર છે:

• Amico 2x4 LED Troffer Panel Light(s)
• માઉન્ટ કરવાનું હાર્ડવેર

4. ઇન્સ્ટોલેશન સૂચનાઓ

The Amico 2x4 LED Troffer Panel Light is designed for easy installation in standard drop ceilings using its built-in clips and included mounting hardware.

4.1 પૂર્વ-ઇન્સ્ટોલેશન પગલાં

1. પાવર ડિસ્કનેક્શન: કોઈપણ વિદ્યુત કાર્ય શરૂ કરતા પહેલા સર્કિટ બ્રેકર પર પાવર બંધ કરો.
2. ફિક્સ્ચર નિરીક્ષણ: Unpack the fixture and inspect it for any damage. Do not install if damaged.
3. Prepare Ceiling Opening: Ensure the ceiling grid opening is appropriate for a 2x4 (approximately 23.74" x 47.76") panel light.

4.2.૨.૨ વાયરિંગ

1. Connect the AC power supply wires to the fixture's input wires (Line, Neutral, Ground) according to local electrical codes.
2. If using 0-10V dimming, connect the dimming wires (purple and gray) from the fixture to the compatible 0-10V dimmer switch. Ensure polarity is correct.
3. Secure all wire connections with appropriate connectors.

4.3 માઉન્ટ કરવાનું

1. Carefully lift the LED panel into the ceiling grid opening.
2. Engage the built-in clips on the sides of the fixture with the ceiling grid rails to secure the panel in place.
3. For added security, use the provided mounting hardware to attach the fixture to the building structure, if required by local codes or desired.

Image 4.1: Product dimensions (47.76"L x 23.74"W x 1.91"H) for installation planning.

5. ઓપરેટિંગ સૂચનાઓ

The Amico LED Troffer Panel Light offers adjustable wattage and color temperature settings to customize your lighting environment.

5.1 Adjusting Wattage (Brightness)

The fixture features a toggle switch on the back to select the desired wattage, which directly affects the brightness (lumens). Choose from 25W, 30W, 35W, 40W, or 50W.

Image 5.1: Location of the 5-position power toggle switch for wattagઇ ગોઠવણ.

Image 5.2: Visual representation of brightness levels at 25W, 30W, 35W, 40W, and 50W.

5.2 Adjusting Color Temperature (CCT)

A separate toggle switch on the back of the fixture allows you to select the desired color temperature: 3000K (Warm White), 3500K (Neutral White), 4000K (Cool White), or 5000K (Daylight White).

Image 5.3: Location of the 4-position CCT toggle switch for color temperature adjustment.

છબી ૪.૧: ઉદાહરણamples of different color temperatures (3000K, 3500K, 4000K, 5000K) in various environments.

5.3 0-10V Dimming

The fixture supports 0-10V dimming, allowing for smooth brightness adjustment from 0% to 100% when connected to a compatible 0-10V dimmer switch.

Image 5.5: Illustration of 0-10V dimming capability in a conference room setting.

6. જાળવણી

The Amico LED Troffer Panel Light requires minimal maintenance.

• સફાઈ: સફાઈ કરતા પહેલા ખાતરી કરો કે પાવર બંધ છે. ફિક્સ્ચરને નરમ, સૂકા અથવા સહેજ ડીથી સાફ કરોamp કાપડ ઘર્ષક ક્લીનર્સ અથવા સોલવન્ટનો ઉપયોગ કરશો નહીં.
• કોઈ વપરાશકર્તા-સેવાયોગ્ય ભાગો નથી: The LED chips and driver are integrated and not user-serviceable. Attempting to open or modify the fixture will void the warranty.
• આયુષ્ય: The fixture is designed for over 50,000 hours of continuous operation.

Image 6.1: Internal components of the LED Troffer Panel Light, highlighting its durable design.

7. મુશ્કેલીનિવારણ

If you encounter issues with your Amico LED Troffer Panel Light, refer to the following common troubleshooting steps:

જો આ પગલાંઓથી સમસ્યા હલ ન થાય, તો ગ્રાહક સપોર્ટનો સંપર્ક કરો.

8. સ્પષ્ટીકરણો

9. વોરંટી અને સપોર્ટ

The Amico 2x4 LED Troffer Panel Light comes with a limited warranty. For specific warranty terms and conditions, please refer to the product packaging or contact Amico customer service.

For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact Amico customer support through their official channels.