Anpviz JB35X Ceiling Mount Junction Box Bracket Instruction Manual

1. ઉત્પાદન ઓવરview

The Anpviz JB35X is a full metal ceiling mount junction box bracket designed for specific Anpviz IP PoE cameras. This bracket provides a secure and organized solution for camera installation, protecting network cables from environmental elements.

મુખ્ય લક્ષણો:

• Full metal construction with surface spray treatment for durability.
• Integrated cable holes for organized cable management and protection.
• Suitable for both indoor and outdoor ceiling mounting applications.

સુસંગતતા:

This junction box is compatible with the following Anpviz camera series:

• U-Series Cameras: IPC-D350W-S, IPC-D363WD-SA, IPC-D383WD-SA, IPC-D351WD-SL, IPC-D381WD-SL.
• H-Series Cameras: IPC-D3053WD-S, IPC-D3083WD-S, IPC-D383WD-S, IPC-D3653WD-SA, IPC-D3853WD-SA.

આકૃતિ 1: ફ્રન્ટ view of the Anpviz JB35X Ceiling Mount Junction Box Bracket. This image shows the white, circular metal housing designed to protect camera wiring.

2. પેકેજ સામગ્રી

કૃપા કરીને ચકાસો કે બધી વસ્તુઓ પેકેજમાં હાજર છે:

• Anpviz JB35X Junction Box Bracket
• માઉન્ટિંગ સ્ક્રૂ
• Other accessories as specified by the manufacturer (e.g., holes sticker, cable tie, foam pad, if applicable).

Figure 2: Diagram illustrating the Anpviz JB35X junction box, its compatibility with certain camera models, and a list of included accessories such as screws, cable tie, and foam pad.

3. સ્થાપન માર્ગદર્શિકા

Follow these steps for proper installation of the Anpviz JB35X junction box bracket.

1. માઉન્ટિંગ સપાટી તૈયાર કરો: Ensure the ceiling or wall surface is clean, flat, and capable of supporting the weight of the junction box and the camera.
2. માર્ક ડ્રિલિંગ પોઈન્ટ્સ: Use the junction box as a template to mark the drilling points for the mounting screws. Ensure proper alignment for cable entry. Refer to the dimension diagram for precise measurements.
3. ડ્રિલ છિદ્રો: Drill pilot holes at the marked locations. The size of the drill bit should be appropriate for the provided mounting screws and any wall anchors if necessary.
4. રૂટ કેબલ્સ: If routing cables through the mounting surface, ensure the necessary holes are made for cable passage into the junction box.
5. Mount the Junction Box: Secure the junction box to the prepared surface using the provided screws. Ensure it is firmly attached and stable.
6. Connect Camera Wiring: Route the camera's network and power cables through the designated cable holes in the junction box. Make all necessary connections inside the box.
7. કેમેરા જોડો: Mount the compatible Anpviz camera onto the junction box bracket according to the camera's specific installation instructions. Ensure all connections are secure and weatherproofed if installed outdoors.

Figure 3: Technical diagram displaying the precise dimensions of the Anpviz JB35X junction box, including its diameter (128mm), height (32.5mm), and screw hole spacing (99mm and 51.5mm). This is crucial for accurate installation planning.

4. ઓપરેટિંગ સૂચનાઓ

The Anpviz JB35X junction box is a passive mounting accessory. Once installed correctly, its primary function is to provide a stable mounting platform and protect the camera's wiring connections. No active operation is required from the junction box itself.

Ensure that all cables are properly routed and secured within the junction box to prevent damage or interference.

5. જાળવણી

To ensure the longevity and optimal performance of your Anpviz JB35X junction box and the attached camera, consider the following maintenance guidelines:

• નિયમિત તપાસ: Periodically inspect the junction box and its mounting for any signs of loosening, corrosion, or damage, especially in outdoor environments.
• સફાઈ: જો જરૂરી હોય તો, જંકશન બોક્સના બાહ્ય ભાગને નરમ, ડી વડે હળવેથી સાફ કરો.amp કાપડ કઠોર રસાયણો અથવા ઘર્ષક સામગ્રીનો ઉપયોગ કરવાનું ટાળો જે પૂર્ણાહુતિને નુકસાન પહોંચાડી શકે.
• કેબલ અખંડિતતા: Ensure that all cables entering and exiting the junction box remain intact and free from cuts or wear.
• કાટ પ્રતિકાર: While the product is designed to be rust-resistant, extreme conditions may still affect its finish over time. Address any signs of rust promptly to prevent further degradation.

6. મુશ્કેલીનિવારણ

This section addresses common issues related to the installation and function of the junction box.

• Junction Box Not Mounting Securely:
  • Verify that the mounting surface is appropriate and structurally sound.
  • Ensure the correct drill bit size was used for pilot holes and that screws are fully tightened.
  • If mounting to drywall or similar materials, use appropriate wall anchors (not included unless specified).
• Cables Not Fitting or Protected:
  • Confirm that cable diameters are within the capacity of the junction box's cable entry points.
  • Ensure cables are routed neatly to avoid pinching or excessive bending.
• Camera Not Attaching to Junction Box:
  • Double-check the compatibility list in Section 1 to ensure your camera model is supported.
  • Align the camera's mounting holes with those on the junction box.

7. સ્પષ્ટીકરણો

8. વોરંટી માહિતી

For detailed warranty information regarding the Anpviz JB35X Ceiling Mount Junction Box Bracket, please refer to the official Anpviz website or contact Anpviz customer support directly. Warranty terms and conditions may vary by region and purchase date.

9. ગ્રાહક આધાર

If you encounter any issues or have questions not covered in this manual, please visit the official Anpviz support page or contact their customer service team for assistance. Contact details are typically available on the Anpviz webસાઇટ

Anpviz Official Webસાઇટ: www.anpviz.com (કૃપા કરીને નોંધ કરો: આ એક પ્લેસહોલ્ડર છે) URL. Refer to your product packaging or official Anpviz documentation for the correct support webસાઇટ.)