1. પરિચય
This manual provides essential instructions for the proper setup, operation, and maintenance of your Keeson CU380 JLDK.30.03.20 adjustable bed base remote control. Please read this manual thoroughly before use to ensure correct functionality and to prevent any issues.
2. સેટઅપ અને પેરિંગ
2.1 બેટરી ઇન્સ્ટોલેશન
The remote control requires 2 AAA batteries (not included). To install, slide open the battery compartment cover on the back of the remote. Insert the batteries, ensuring correct polarity (+/-). Close the battery compartment cover securely.
2.2 Remote Pairing Procedure
If your remote control is not already paired with your adjustable bed base, follow these steps:
- પગલું 1: Disconnect the power cord of your adjustable bed base from the electrical outlet. Wait approximately 5 seconds, then plug it back into the outlet.
- પગલું 2: Within 10 seconds of plugging in the power cord, locate the PAIR button on the back of the remote control. Press and hold this PAIR button. The button will illuminate blue and begin flashing.
- પગલું 3: Continue holding the PAIR button until it stops flashing and the LED light on the control box of your bed base goes out. Release the PAIR button. The remote is now paired with the adjustable base.
- પગલું 4: Test all remote functions to confirm successful pairing.
Image: Remote control pairing instructions, illustrating the steps to connect the remote to the bed base.
3. રીમોટ કંટ્રોલનું સંચાલન
The remote control provides intuitive buttons for adjusting your bed base. Familiarize yourself with the button layout and their corresponding functions:
- માથું ઉપર/નીચે: પલંગના માથાના ભાગને સમાયોજિત કરે છે.
- પગ ઉપર/નીચે: પલંગના પગના ભાગને સમાયોજિત કરે છે.
- ફ્લેટ: પલંગને સપાટ સ્થિતિમાં પાછો લાવે છે.
- Zero G: Activates the pre-programmed Zero Gravity position, designed to relieve pressure.
- Memory Presets (if available): Some remotes may have programmable memory buttons to save your favorite positions. Consult your bed base manual for specific instructions.
છબી: આગળ view of the Keeson CU380 JLDK.30.03.20 remote control, displaying buttons for head/foot adjustment, Zero G, and other functions.
4. જાળવણી
4.1 બેટરી રિપ્લેસમેન્ટ
Replace batteries when the remote's response becomes sluggish or stops working. Always use new AAA batteries and dispose of old batteries responsibly.
4.2 સફાઈ
To clean the remote control, gently wipe it with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials, as these can damage the remote's surface or internal components.
5. મુશ્કેલીનિવારણ
૪.૩ રિમોટ જવાબ આપતું નથી
- ખાતરી કરો કે બેટરી યોગ્ય રીતે ઇન્સ્ટોલ કરેલી છે અને ખાલી નથી થઈ ગઈ. જો જરૂરી હોય તો બદલો.
- Verify the remote is properly paired with the bed base by following the pairing procedure in Section 2.2.
- Check that the bed base is plugged into a functional power outlet.
૩.૫ સુસંગતતા સમસ્યાઓ
This remote control is specifically designed for Keeson CU380 JLDK.30.03.20 adjustable bed bases. It is not a universal remote. Before purchasing or attempting to use, ensure your bed base's control box model number matches CU380 JLDK.30.03.20.
Image: Visual guide emphasizing the importance of verifying the control box model number and comparing it with the old remote for compatibility.
6. સ્પષ્ટીકરણો
- મોડલ: CU380 JLDK.30.03.20
- સુસંગત ઉપકરણો: Adjustable bed base (Keeson CU380 JLDK.30.03.20)
- પાવર સ્ત્રોત: 2 AAA બેટરી (શામેલ નથી)
- રંગ: કાળો
- વિશેષ લક્ષણ: Not a universal remote
7. વોરંટી અને સપોર્ટ
7.1 વોરંટી માહિતી
Specific warranty details for this remote control are not provided in the product information. Please refer to the documentation that came with your adjustable bed base or contact the original seller for warranty inquiries.
7.2 ગ્રાહક સપોર્ટ
If you encounter issues not covered in this manual or require further assistance, please contact the seller or manufacturer of your adjustable bed base. When contacting support, provide detailed information about your bed base, control box, and the remote control, including any serial numbers or model identifiers.
