PowMr 6500W હાઇબ્રિડ સોલર ઇન્વર્ટર વપરાશકર્તા માર્ગદર્શિકા

1. પરિચય

This manual provides essential information for the installation, operation, and maintenance of your PowMr 6500W Hybrid Solar Inverter. Please read this manual thoroughly before installation and operation to ensure proper use and safety. This inverter is designed to convert 48V DC power to 110V/240V AC, featuring a 140A MPPT controller and supporting up to 6 units in parallel for a maximum combined output of 39kW.

2. સલામતી માહિતી

• લાયકાત ધરાવતા કર્મચારી: સ્થાપન અને જાળવણી ફક્ત લાયક કર્મચારીઓ દ્વારા જ થવી જોઈએ.
• વિદ્યુત સંકટ: આ ઉપકરણ ઉચ્ચ વોલ્યુમ સાથે કાર્ય કરે છેtages. Do not attempt to open or repair the unit unless specifically instructed.
• યોગ્ય ગ્રાઉન્ડિંગ: Ensure the inverter is properly grounded before connecting any power sources.
• બેટરી સલામતી: Always connect batteries with correct polarity. Wear protective gear when working with batteries.
• વેન્ટિલેશન: ઓવરહિટીંગ અટકાવવા માટે ઇન્વર્ટરની આસપાસ પર્યાપ્ત વેન્ટિલેશનની ખાતરી કરો.
• ફક્ત આંતરિક ઉપયોગ: This product is designed for indoor use. Do not expose it to rain, snow, or excessive moisture.

3. ઉત્પાદન ઓવરview

The PowMr 6500W Hybrid Solar Inverter is an all-in-one solution for solar power systems, offering robust performance and versatile functionality.

આકૃતિ 3.1: ફ્રન્ટ view of the PowMr 6500W Hybrid Solar Inverter, showcasinડિસ્પ્લે અને કંટ્રોલ બટનો.

આકૃતિ 3.2: ઓવરview of key features including 6.5KW AC output, 140A max AC charging, split/single-phase support, battery compatibility, and parallel operation.

3.1. મુખ્ય લક્ષણો

• Split-phase and Single-phase Output: Provides both 120V and 240V AC output.
• હાઇ પાવર આઉટપુટ: 6500W continuous rated output, with a surge capacity of 13000W.
• Integrated MPPT Controller: Built-in 140A (70*2) MPPT solar charge controller.
• Dual PV Input: Supports two independent photovoltaic arrays with a maximum PV input power of 10kW (5000W * 2).
• સમાંતર ક્ષમતા: Up to 6 units can be connected in parallel for a total capacity of 39kW.
• Flexible Charging Modes: Four selectable battery charging modes (Solar Only, Utility Priority, Solar Priority, Utility & Solar Hybrid).
• બહુવિધ આઉટપુટ મોડ્સ: Two output working modes (Mains Bypass Output, Inverter Output).
• વ્યાપક બેટરી સુસંગતતા: Works with 48V lead-acid (Seal, AGM, Gel, Flooded) and lithium batteries, also supports batteryless operation.
• વ્યાપક રક્ષણ: Includes short circuit, over-current, over/under voltage, overload, and backfeed protection.

3.2. ઘટક ઓળખ

Figure 3.3: Detailed diagram of the inverter's ports and connections, including LCD screen, physical buttons, LED indicator, ON/OFF rocker switch, PV input, battery ports, dry contact, RS485/CAN port, WiFi port, USB-B port, CT, grounding screw, AC output, AC input, generator port, and parallel communication port.

3.3. Unboxing the Inverter

4. સેટઅપ અને ઇન્સ્ટોલેશન

Proper installation is crucial for the safe and efficient operation of your inverter. Follow these steps carefully.

૯.૩. વાયરિંગ માર્ગદર્શિકા

4.2. કનેક્શન ડાયાગ્રામ

Figure 4.1: Diagram illustrating the split-phase (120V/240V) and single-phase (120V) output configurations of the inverter.

Figure 4.2: A detailed split-phase connection diagram showing PV input, mains/generator input, AC output, and battery connections.

4.3. સમાંતર કામગીરી

The inverter supports parallel operation for increased power output. Up to 6 units can be connected.

Figure 4.3: Diagrams illustrating parallel connections for two, three, and six solar storage inverters to expand system capacity.

5. ઓપરેટિંગ સૂચનાઓ

5.1. ચાર્જિંગ મોડ્સ

The inverter offers four selectable battery charging modes:

• માત્ર સૌર: Batteries are charged exclusively by solar power.
• ઉપયોગિતા પ્રાથમિકતા: Utility power is the primary source for charging, with solar as a backup.
• સૌર પ્રાથમિકતા: Solar power is the primary source for charging, with utility as a backup.
• Utility & Solar Hybrid: Both utility and solar power are used to charge batteries.

5.2. આઉટપુટ મોડ્સ

Two output working modes are available:

• Mains Bypass Output: Loads are powered directly by the utility grid.
• ઇન્વર્ટર આઉટપુટ: Loads are powered by the inverter, drawing from solar or battery power.

5.3. Battery Compatibility

The inverter is compatible with various 48V battery types:

• Lead-acid batteries (Seal, AGM, Gel, Flooded)
• લિથિયમ બેટરી
• Supports batteryless operation.

Figure 5.1: Visual representation of the inverter's compatibility with various battery types including AGM, GEL, FLD, and LI.

6. જાળવણી

• નિયમિત તપાસ: Periodically check all connections for tightness and signs of corrosion.
• સફાઈ: Keep the inverter's ventilation openings clear of dust and debris to ensure proper airflow. Use a dry cloth for cleaning the exterior.
• બેટરી આરોગ્ય: મોનિટર બેટરી વોલ્યુમtage and charge levels regularly. Follow battery manufacturer guidelines for maintenance.
• પર્યાવરણીય પરિસ્થિતિઓ: ખાતરી કરો કે ઇન્વર્ટર તેના નિર્દિષ્ટ તાપમાન અને ભેજ શ્રેણીમાં કાર્યરત છે.

7. મુશ્કેલીનિવારણ

This section provides solutions for common issues. For complex problems, contact customer support.

8. ટેકનિકલ વિશિષ્ટતાઓ

9. વોરંટી અને સપોર્ટ

For warranty information, please refer to the warranty card included in your product packaging or contact PowMr customer support. For technical assistance, troubleshooting beyond this manual, or spare parts, please visit the official PowMr webસાઇટ પર જાઓ અથવા તેમના અધિકૃત સેવા કેન્દ્રોનો સંપર્ક કરો.

આકૃતિ 9.1: ઉદાamples of application scenarios for the PowMr Hybrid Solar Inverter, including RVs and general solar power systems.