પરિચય
Thank you for choosing the BESTTEN Super Slim Dimmer Switch. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new dimmer switch. Please read all instructions carefully before installation and retain this manual for future reference.
Image: Six BESTTEN Super Slim Dimmer Switches.
સલામતી માહિતી
- ચેતવણી: આગ, આંચકો અથવા મૃત્યુથી બચવા માટે, સર્કિટ બ્રેકર અથવા ફ્યુઝ બોક્સ પર પાવર બંધ કરો અને વાયરિંગ પહેલાં પાવર બંધ છે કે નહીં તે તપાસો.
- બધા રાષ્ટ્રીય અને સ્થાનિક ઇલેક્ટ્રિકલ કોડ અનુસાર સ્થાપિત કરો.
- માત્ર કોપર વાયરનો ઉપયોગ કરો.
- આ ઉપકરણ ફક્ત અંદરના ઉપયોગ માટે છે.
- Do not use with non-dimmable bulbs.
- Maximum load: 300W for dimmable LED/CFL, 600W for incandescent/halogen.
- Only one dimmer switch can be installed per 3-way circuit.
પેકેજ સામગ્રી
- BESTTEN Super Slim Dimmer Switch (Quantity as purchased, e.g., 6 switches)
- માઉન્ટિંગ સ્ક્રૂ
Note: Wall plates are not included and must be purchased separately.
વિશિષ્ટતાઓ
| પરિમાણ | મૂલ્ય |
|---|---|
| ભાગtage | 120V, 60Hz |
| Dimmable LED/CFL Max. Load | 300W |
| Incandescent/Halogen Max. Load | 600W |
| સ્વિચ પ્રકાર | Single Pole / 3-Way |
| વાયરિંગનો પ્રકાર | Wire Pigtails |
| ઓપરેશન તાપમાન | 32°F - 104°F (0°C - 40°C) |
| પ્રમાણપત્રો | ETL/cETL લિસ્ટેડ |
| પરિમાણો (L x W x H) | 4.13 x 1.73 x 0.87 ઇંચ |
Image: Detailed specifications for the dimmer switch.
Image: Super Slim Design dimensions.
Image: Bulb compatibility and wattagઇ રેટિંગ્સ.
સેટઅપ અને ઇન્સ્ટોલેશન
Before beginning installation, ensure the power is turned off at the circuit breaker. This dimmer switch is designed for both single-pole and 3-way applications and does not require a neutral wire, making it suitable for older electrical systems.
Image: No neutral wire required feature.
વાયરિંગ સૂચનાઓ
- પાવર બંધ કરો: Locate your circuit breaker or fuse box and turn off the power to the switch location. Verify power is off using a voltage પરીક્ષક.
- હાલના સ્વીચને દૂર કરો: Carefully remove the old switch from the wall box.
- વાયર ઓળખો: Identify the Line (Hot), Load, Ground, and Traveler wires (for 3-way installations). It is recommended to take a picture of the existing wiring before disconnecting.
- વાયર કનેક્ટ કરો: Refer to the wiring diagrams below for single-pole and 3-way installations. Use wire nuts to secure connections.
- કાળો વાયર: Connect to the Line (Hot) wire.
- લાલ વાયર: Connect to the Load wire.
- લીલો વાયર: Connect to the Ground wire.
- Red & White wire: This wire is used only in 3-way installations. For single-pole installations, cap this wire with a wire nut. In 3-way installations, connect it to one of the Traveler wires.
- Mount the dimmer: Gently push the wired dimmer switch into the wall box and secure it with the provided screws.
- વોલ પ્લેટ ઇન્સ્ટોલ કરો: Attach your desired wall plate (not included).
- પાવર પુનઃસ્થાપિત કરો: સર્કિટ બ્રેકર પર પાવર ફરીથી ચાલુ કરો.
Image: Single Pole and 3-Way Wiring Diagrams.
3-વે એપ્લિકેશનો માટે મહત્વપૂર્ણ
For 3-way switches, there are three terminals besides the ground. One terminal is typically a different color than the other two. Label this wire as the Line/Load. The other two terminals connect to the Traveler wires. Caution: Only one dimmer switch can be installed in a 3-way circuit.
ઓપરેટિંગ સૂચનાઓ
The BESTTEN Super Slim Dimmer Switch features a rocker switch for ON/OFF control and a slide dimmer for brightness adjustment.
- ચાલુ/બંધ કરવું: Press the bottom part of the rocker switch to turn the lights ON, and the top part to turn them OFF.
- તેજને સમાયોજિત કરવી: Use the vertical slider on the side of the rocker switch to adjust the light level. Slide up for brighter light and down for dimmer light.
Dimming Range Setting (Sensitivity Dial)
To optimize performance and eliminate flickering with certain bulb types, you may need to adjust the dimmer's sensitivity dial. This small dial is located on the side of the dimmer switch, accessible after removing the wall plate.
- Turn on the switch and move the slide dimmer to its lowest (all the way down) setting.
- Rotate the Sensitivity Dial clockwise all the way down. નોંધ: If the dial stops in either direction, do not continue to turn it.
- Rotate the Sensitivity Dial counter-clockwise slowly until the preferred lowest light level is achieved and the lights are not flickering.
Image: Dimming Range Setting with Sensitivity Dial.
જાળવણી
To maintain your dimmer switch, ensure power is off before cleaning. Wipe the surface with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or internal components. Regular inspection for loose connections or damage is recommended.
મુશ્કેલીનિવારણ
- લાઇટ ચાલુ થતી નથી:
- સર્કિટ બ્રેકર તપાસો અને ખાતરી કરો કે પાવર પુનઃસ્થાપિત થયો છે.
- ચકાસો કે બધા વાયર કનેક્શન સુરક્ષિત છે.
- Ensure the bulb is functional and correctly installed.
- Lights flicker, hum, or buzz:
- Adjust the dimming range using the sensitivity dial as described in the 'Operating Instructions' section.
- Ensure your bulbs are specifically rated as 'dimmable'. Non-dimmable bulbs will not function correctly with a dimmer.
- Some dimmable LED/CFL bulbs may not be fully compatible with all dimmers. Consider trying a different brand or type of dimmable bulb.
- કુલ વોટની ખાતરી કરોtage of connected bulbs does not exceed the dimmer's maximum load capacity.
- Dimmer switch is warm to the touch:
- It is normal for dimmer switches to feel warm during operation. If the dimmer feels excessively hot, ensure the load does not exceed the maximum wattagઇ રેટિંગ.
Image: Information on eliminating flickering.
વોરંટી અને આધાર
BESTTEN products are designed for reliability and performance. For warranty information or technical support, please refer to the manufacturer's official webસાઇટ પર જાઓ અથવા તેમની ગ્રાહક સેવાનો સીધો સંપર્ક કરો. ખરીદીના પુરાવા તરીકે તમારી ખરીદી રસીદ રાખો.
તમે વધુ માહિતી અને સંપર્ક વિગતો ની મુલાકાત લઈને મેળવી શકો છો BESTTEN Store on Amazon.
