1. પરિચય
Thank you for choosing the Geevon Wireless Indoor Outdoor Thermometer. This device provides accurate real-time temperature and humidity readings for both indoor and up to three outdoor locations. It features a large LCD display, max/min records, comfort indicators, and customizable alerts to help you monitor your environment effectively.
2. શરૂઆત કરવી
2.1 પેકેજ સામગ્રી
- ૧ x મુખ્ય ડિસ્પ્લે યુનિટ
- 3 x રિમોટ સેન્સર્સ
- 1 x USB પાવર કેબલ
- 1 x સૂચના માર્ગદર્શિકા
2.2 બેટરી ઇન્સ્ટોલેશન
બેટરીઓ શામેલ નથી અને અલગથી ખરીદવી આવશ્યક છે.
- મુખ્ય પ્રદર્શન એકમ: Open the battery compartment on the back. Insert 2 x AA batteries, ensuring correct polarity (+/-). Close the compartment.
- રિમોટ સેન્સર: Open the battery compartment on the back of each sensor. Insert 2 x AAA batteries into each sensor, ensuring correct polarity (+/-). Close the compartment.
Image: Main display unit and remote sensor battery compartments, showing battery insertion points.
2.3 Sensor Channel Selection
Each remote sensor has a channel switch (1, 2, or 3) inside its battery compartment. Before inserting batteries, select a unique channel for each sensor to avoid interference. The main display unit will automatically detect and display data from the corresponding channels.
Image: A remote sensor highlighting the channel selection switch located next to the battery compartment.
2.4 Sensor Placement Guidelines
For optimal performance and accurate readings, consider the following:
- Place sensors vertically.
- Protect sensors from direct sunlight and rain.
- Avoid placing sensors directly on the ground.
- Ensure sensors are within the 60-meter (200-foot) wireless range of the main unit.
Image: Illustrations demonstrating proper vertical sensor placement, protection from direct sun, and avoiding ground placement.
3. ઓપરેશન
3.1 ઓવર ડિસ્પ્લેview
The main display unit shows indoor temperature and humidity, along with readings from up to three remote sensors. It also indicates max/min records, comfort levels, and trend arrows.
Image: The main display unit showing indoor and three outdoor temperature and humidity readings.
3.2 Temperature and Humidity Readings
The display shows current temperature and humidity for each channel. Trend arrows indicate whether the temperature or humidity is rising, falling, or remaining stable.
3.3 Max/Min Records
The device records the maximum and minimum temperature and humidity values over the last 24 hours. Press the 'MEM' button to cycle through current, maximum, and minimum readings.
૪.૪ આરામ સૂચક
A face icon on the display indicates the comfort level based on current temperature and humidity:
- શુષ્ક: ભેજ <40%
- આરામ: 40% ≤ Humidity ≤ 70% and 20℃ ≤ Temperature ≤ 28℃
- ભીનું: ભેજ > 70%
Image: The main display unit showing the comfort indicator icon, with a visual explanation of dry, comfort, and wet conditions.
3.5 Unit Selection (°C/°F)
Press the '℃/℉' button to switch between Celsius and Fahrenheit temperature units.
3.6 Temperature and Humidity Alerts
You can set high and low alert values for temperature and humidity for each channel. When the readings exceed or fall below these preset values, an audible alarm will sound, and the corresponding HI AL or LO AL symbol will appear on the screen.
Image: The main display unit indicating high (HI AL) and low (LO AL) temperature and humidity alerts.
૫.૧ બેકલાઇટ ફંક્શન
When powered by batteries, the backlight illuminates for 7 seconds after pressing any button. When powered via the USB cable, the backlight can be set to remain continuously on or adjust brightness levels (100%, 50%, 0%).
Image: The main display unit illustrating backlight intensity options and various mounting methods (wall, desktop, magnetic).
3.8 USB Power and Charging
The main display unit can be powered by the included USB cable. It also features an additional USB output port (5V/1A) that can be used to charge small electronic devices.
Image: The main display unit connected via USB, demonstrating its ability to charge a smartphone.
4. જાળવણી
4.1 બેટરી રિપ્લેસમેન્ટ
Replace batteries in the main unit and sensors when the low battery indicator appears on the display. Always replace all batteries in a unit at the same time with new ones of the same type.
4.2 સફાઈ
ઉપકરણ અને સેન્સરને સોફ્ટ, ડી વડે સાફ કરોamp cloth. Do not use abrasive cleaners or immerse the units in water.
5. મુશ્કેલીનિવારણ
- No display on main unit: Check battery installation and polarity. Ensure batteries are not depleted. If using USB power, check the cable connection.
- Remote sensor not displaying data:
- Ensure sensor batteries are correctly installed and not depleted.
- Verify the sensor channel switch matches the selected channel on the main unit.
- Move the sensor closer to the main unit to check if it's out of range.
- Avoid major metal obstructions between the sensor and the main unit.
- અચોક્કસ વાંચન:
- ખાતરી કરો કે સેન્સર સીધા સૂર્યપ્રકાશ, ગરમીના સ્ત્રોતો અથવા અતિશય ડ્રાફ્ટ્સના સંપર્કમાં ન આવે.
- Allow the units to stabilize for 15-30 minutes after initial setup or battery replacement.
- Alerts not sounding: Check that alert values are correctly set and the alert function is enabled.
6. ઉત્પાદન સ્પષ્ટીકરણો
| લક્ષણ | સ્પષ્ટીકરણ |
|---|---|
| ઇન્ડોર તાપમાન રેન્જ | -10℃ થી 60℃ (14℉ થી 140℉) |
| આઉટડોર તાપમાન રેન્જ | -50 ℃ થી 70 ℃ (-58 ℉ થી 158 ℉) |
| તાપમાનની ચોકસાઈ | ±1℃ |
| ભેજની રેન્જ | 20% થી 95% |
| ભેજની ચોકસાઈ | ±5% |
| વાયરલેસ આવર્તન | 433 MHz |
| વાયરલેસ રેંજ | ખુલ્લી હવામાં 60 મીટર (200 ફૂટ) સુધી |
| મુખ્ય એકમ પાવર | 2 x AA બેટરી અથવા USB પાવર |
| રિમોટ સેન્સર પાવર | 2 x AAA batteries per sensor |
| મુખ્ય એકમ પરિમાણો | 1.5 x 10 x 13 સેમી (0.6 x 3.9 x 5.1 ઇંચ) |
| સામગ્રી | ABS, મેટલ |
Image: Detailed dimensions of the main display unit and a remote sensor.
7. વોરંટી અને સપોર્ટ
Warranty information is typically provided with your product packaging or can be found on the manufacturer's official website. For technical support or further assistance, please refer to the contact information provided in your product documentation or visit the Geevon support page online.
