Fenix PD35R ACE Tactical Flashlight User Manual

પરિચય

The Fenix PD35R ACE is a high-performance, USB rechargeable LED tactical flashlight designed for various lighting needs, including outdoor activities and law enforcement. It features a powerful 2000 lumen output, a 380-meter beam distance, and Fenix's patented SET output customization system, offering three distinct mode selection profiles. This manual provides detailed instructions for its safe and effective use.

Image: The Fenix PD35R ACE flashlight, highlighting its robust construction and side switch.

બૉક્સમાં શું છે

• ફેનિક્સ PD35R ACE ફ્લેશલાઇટ
• રિચાર્જેબલ લિથિયમ-આયન બેટરી (શામેલ)
• યુએસબી ટાઇપ-સી ચાર્જિંગ કેબલ
• હોલ્સ્ટર
• લેનયાર્ડ
• ફાજલ ઓ-રિંગ
• EdisonBright Accessory Case

સેટઅપ

બેટરી ઇન્સ્ટોલેશન

1. Unscrew the tail cap of the flashlight counter-clockwise.
2. Insert the included Fenix ARB-L18-4000P Lithium-Ion battery with the anode (+) end facing towards the flashlight head.
3. Screw the tail cap back on clockwise until it is fully tightened. Ensure a secure connection for proper operation and waterproofing.

પ્રારંભિક ચાર્જિંગ

Before first use, it is recommended to fully charge the battery. The PD35R ACE features a hidden USB-C charging port.

1. Locate the rubber cover on the side of the flashlight head, near the side switch.
2. Lift the rubber cover to expose the USB Type-C charging port.
3. Connect the USB Type-C cable to the flashlight and the other end to a USB power source (e.g., wall adapter, power bank, computer).
4. ચાર્જિંગ સૂચક લાઇટ ચાર્જિંગ સ્થિતિ બતાવશે. લાલ લાઇટ ચાર્જિંગ સૂચવે છે, અને લીલો લાઇટ સંપૂર્ણ ચાર્જ સૂચવે છે.
5. Once charging is complete, securely close the rubber cover to maintain the flashlight's waterproof rating.

છબી: ઓવરview of Fenix PD35R ACE features, including the hidden USB-C charging port.

ઓપરેટિંગ સૂચનાઓ

The Fenix PD35R ACE utilizes a dual-switch system: a tactical tail switch for momentary/constant on/off and a side switch for output selection and mode switching.

પાવર ચાલુ/બંધ

• મોમેન્ટરી ચાલુ: Half-press the tactical tail switch. Release to turn off.
• સતત ચાલુ/બંધ: Fully press the tactical tail switch until a click is heard to turn the flashlight on or off.

આઉટપુટ પસંદગી

With the flashlight on, single-click the side switch to cycle through Eco, Low, Med, High, and Turbo modes.

SET Mode Selection (ACE System)

The PD35R ACE features three distinct SET modes (Tactical Operation, Military and Duty, Outdoor Activity) that customize the available output levels and their order. To switch between SET modes:

• With the flashlight off, press and hold the side switch for 3 seconds. The flashlight will flash to indicate the current SET mode.
• Release the side switch, then quickly single-click it to cycle through the three SET modes.
• Once the desired mode is indicated by its unique flash pattern, press the tactical tail switch to confirm and exit.

Image: The SET 3-in-1 system, illustrating the customizable output options for different operational profiles.

સ્ટ્રોબ અને SOS મોડ્સ

• સ્ટ્રોબ: With the flashlight on, press and hold the side switch for 0.8 seconds to activate Strobe mode. Single-click the side switch to return to the previously used general mode.
• સોસ: In Outdoor Activity SET mode, cycle through the general modes until SOS is reached.

ચાર્જિંગ

The Fenix PD35R ACE features a convenient USB Type-C charging port. Ensure the flashlight is off during charging for optimal performance.

• Open the rubber cover on the flashlight head to access the USB-C port.
• Connect the provided USB-C cable to the flashlight and a power source.
• ચાર્જિંગ દરમિયાન ચાર્જિંગ સૂચક લાલ અને સંપૂર્ણ ચાર્જ થવા પર લીલો થઈ જશે.
• Charging time for a fully depleted battery is approximately 3-4 hours, depending on the power source.
• Always close the rubber cover tightly after charging to maintain water resistance.

જાળવણી

• સફાઈ: Periodically clean the flashlight body with a soft cloth. For stubborn dirt, use a damp કાપડ કઠોર રસાયણો ટાળો.
• ઓ-રિંગ્સ: Inspect the O-rings regularly for wear and tear. Replace them if damaged to maintain the waterproof seal. Lubricate O-rings with silicone grease as needed.
• થ્રેડો: Keep the threads of the tail cap clean and lubricated to ensure smooth operation and good electrical contact.
• બેટરી સંભાળ: Store the battery in a cool, dry place. If the flashlight will not be used for an extended period, remove the battery to prevent leakage. Recharge the battery every four months to prolong its lifespan.

મુશ્કેલીનિવારણ

જો તમારી ફેનિક્સ PD35R ACE ફ્લેશલાઇટ યોગ્ય રીતે કાર્ય કરી રહી નથી, તો કૃપા કરીને નીચેની સામાન્ય સમસ્યાઓ અને ઉકેલોનો સંદર્ભ લો:

• Flashlight does not turn on or flickers:
  • બેટરી યોગ્ય રીતે દાખલ કરવામાં આવી છે કે નહીં તે તપાસો, ધન (+) છેડો માથા તરફ રાખીને.
  • Ensure the tail cap is fully tightened. Loose connections can prevent power flow.
  • The battery may be low on charge. Try charging the battery fully.
  • Clean the contact points of the battery and flashlight with an alcohol swab.
• Flashlight won't charge:
  • Ensure the USB-C cable is securely connected to both the flashlight and the power source.
  • ખામીયુક્ત એક્સેસરીઝને નકારી કાઢવા માટે અલગ USB-C કેબલ અથવા પાવર એડેપ્ટર અજમાવો.
  • Verify the charging port is clean and free of debris.
  • The battery might be deeply discharged. Allow it to charge for a longer period, or try a different battery if available.
• Output modes are not cycling correctly:
  • ખાતરી કરો કે બેટરી પર્યાપ્ત ચાર્જ છે.
  • Refer to the 'Operating Instructions' section for correct mode selection procedures, especially for SET modes.

વિશિષ્ટતાઓ

The following table details the performance specifications of the Fenix PD35R ACE flashlight:

Image: Detailed technical specifications for the Fenix PD35R ACE across all output modes.

વોરંટી અને આધાર

The Fenix PD35R ACE flashlight comes with a limited warranty. Please refer to the warranty card included with your product for specific terms and conditions. For technical support, service, or warranty claims, please contact your authorized Fenix dealer or visit the official Fenix webસંપર્ક માહિતી માટે સાઇટ.